Andrade, Jose

Article from CaltechAUTHORS

Daca, Adriana and Hirabayashi, Masatoshi, el al. (2025) The Caltech Mission to Apophis: Accelerating Planetary Science and Planetary Defense; Planetary Science Journal; Vol. 6; No. 11; 253; 10.3847/psj/ae0caf
Moncada, Rigoberto and Gupta, Mukund, el al. (2025) Comparing the Role of Floe Breakage and Melt on Summer Sea Ice Loss; Journal of Geophysical Research: Oceans; Vol. 130; No. 4; e2024JC021223; 10.1029/2024jc021223
Perozzi, David and Andrade, José E., el al. (2025) LS-DEM Guided Analysis of Geotechnical Tests: Exploring Strength Anisotropy and Stress Dependency; Journal of Geotechnical and Geoenvironmental Engineering; Vol. 151; No. 3; 04025001; 10.1061/jggefk.gteng-12975
Ulloa, J. and Ariza, M.P., el al. (2025) Homogenized models of mechanical metamaterials; Computer Methods in Applied Mechanics and Engineering; Vol. 433; 117454; 10.1016/j.cma.2024.117454
Seo, D. and Harmon, J., el al. (2024) DEM simulation of the compression of crushable sand: does the initial particle shape matter?; Géotechnique Letters; Vol. 14; No. 4; 169–174; 10.1680/jgele.24.00047
Ulloa, J. and Ariza, M. P., el al. (2024) Fracture and size effect in mechanical metamaterials; Journal of the Mechanics and Physics of Solids; Vol. 193; 105860; 10.1016/j.jmps.2024.105860
Ulloa, Jacinto and Stainier, Laurent, el al. (2024) Data-driven micromorphic mechanics for materials with strain localization; Computer Methods in Applied Mechanics and Engineering; Vol. 429; 117180; 10.1016/j.cma.2024.117180
Lu, Tracy and Zhou, Ziran, el al. (2024) Role of friction and geometry in tuning the bending stiffness of topologically interlocking materials; Extreme Mechanics Letters; Vol. 71; 102212; 10.1016/j.eml.2024.102212
Rodriguez-Burneo, Andres and Restrepo, Jose I., el al. (2024) Seismic-Response Assessment of Multiblock Tower Structures for Energy Storage: 1/25 Scale; Journal of Structural Engineering; Vol. 150; No. 5; JSENDH.STENG-13144; 10.1061/jsendh.steng-13144
Monfared, Siavash and Ravichandran, Guruswami (Ravi), el al. (2024) Short-range correlation of stress chains near solid-to-liquid transition in active monolayers; Journal of The Royal Society Interface; Vol. 21; No. 214; 20240022; PMCID PMC11077009; 10.1098/rsif.2024.0022
Ulloa, Jacinto and Zhou, Ziran, el al. (2024) Cyclic-loading effects in sand: a micromechanical study considering particle breakage; Granular Matter; Vol. 26; No. 3; 57; 10.1007/s10035-024-01421-7
Feldfogel, Shai and Karapiperis, Konstantinos, el al. (2024) A discretization‐convergent level‐set‐discrete‐element‐method using a continuum‐based contact formulation; International Journal for Numerical Methods in Engineering; Vol. 125; No. 5; e7400
Feldfogel, Shai and Karapiperis, Konstantinos, el al. (2024) Failure of topologically interlocked structures — a Level-Set-DEM approach; European Journal of Mechanics - A/Solids; Vol. 103; 105156; 10.1016/j.euromechsol.2023.105156
Ulloa, Jacinto and Gorgogianni, Anna, el al. (2023) Data-driven breakage mechanics: Predicting the evolution of particle-size distribution in granular media; Journal of the Mechanics and Physics of Solids; Vol. 178; 105328; 10.1016/j.jmps.2023.105328
Dhulipala, Somayajulu and Yee, Daryl W., el al. (2023) Tunable Mechanical Response of Self-Assembled Nanoparticle Superlattices; Nano Letters; Vol. 23; No. 11; 5155-5163; 10.1021/acs.nanolett.3c01058
Sironi, Luca and Andreini, Marco, el al. (2023) Shaking table tests for seismic stability of stacked concrete blocks used for radiation shielding; Engineering Structures; Vol. 283; Art. No. 115895; 10.1016/j.engstruct.2023.115895
Harmon, John M. and Gabuchian, Vahe, el al. (2023) Predicting the seismic behavior of multiblock tower structures using the level set discrete element method; Earthquake Engineering and Structural Dynamics; 10.1002/eqe.3883
Feldfogel, Shai and Karapiperis, Konstantinos, el al. (2023) Scaling, saturation, and upper bounds in the failure of topologically interlocked structures; International Journal of Solids and Structures; Vol. 269; Art. No. 112228; 10.1016/j.ijsolstr.2023.112228
Gorgogianni, Anna and Karapiperis, Konstantinos, el al. (2023) Adaptive goal-oriented data sampling in Data-Driven Computational Mechanics; Computer Methods in Applied Mechanics and Engineering; Vol. 409; Art. No. 115949; 10.1016/j.cma.2023.115949
Monfared, Siavash and Ravichandran, Guruswami, el al. (2023) Mechanical basis and topological routes to cell elimination; eLife; Vol. 12; Art. No. e82435; PMCID PMC10112887; 10.7554/elife.82435
Moncada, Rigoberto and Gupta, Mukund, el al. (2023) Level Set Discrete Element Method for modeling sea ice floes; Computer Methods in Applied Mechanics and Engineering; Vol. 406; Art. No. 115891; 10.1016/j.cma.2023.115891
Buarque de Macedo, R. and Monfared, S., el al. (2023) What is shape? Characterizing particle morphology with genetic algorithms and deep generative models; Granular Matter; Vol. 25; No. 1; Art. No. 2; 10.1007/s10035-022-01282-y
Andrade, José E. and Rosakis, Ares J., el al. (2023) A Framework to Assess the Seismic Performance of Multiblock Tower Structures as Gravity Energy Storage Systems; Journal of Engineering Mechanics; Vol. 149; No. 1; Art. No. 2159; 10.1061/(asce)em.1943-7889.0002159
Andrade, J. E. and Gu, Z., el al. (2022) Measuring Terzaghi's effective stress by decoding force transmission in fluid-saturated granular media; Journal of the Mechanics and Physics of Solids; Vol. 165; Art. No. 104912; 10.1016/j.jmps.2022.104912
Karapiperis, K. and Monfared, S., el al. (2022) Stress transmission in entangled granular structures; Granular Matter; Vol. 24; No. 3; Art. No. 91; 10.1007/s10035-022-01252-4
Harmon, John M. and Seo, Dawa, el al. (2022) Insight into contact forces in crushable sand using experiments and predictive particle-scale modelling; Géotechnique; 10.1680/jgeot.21.00212
Le, Linh A. and Nguyen, Giang D., el al. (2022) Localised failure of geomaterials: how to extract localisation band behaviour from macro test data; Géotechnique; Vol. 72; No. 7; 596-609; 10.1680/jgeot.20.p.105
Mital, Utkarsh and Andrade, José E. (2022) Bridging length scales in granular materials using convolutional neural networks; Computational Particle Mechanics; Vol. 9; No. 1; 221-235; 10.1007/s40571-021-00405-1
Karapiperis, K. and Ortiz, M., el al. (2021) Data-Driven nonlocal mechanics: Discovering the internal length scales of materials; Computer Methods in Applied Mechanics and Engineering; Vol. 386; Art. No. 114039; 10.1016/j.cma.2021.114039
Li, Liuchi and Karapiperis, Konstantinos, el al. (2021) Emerging contact force heterogeneity in ordered soft granular media; Mechanics of Materials; Vol. 162; Art. No. 104055; 10.1016/j.mechmat.2021.104055
Pal, Raj Kumar and de Macedo, Robert Buraque, el al. (2021) Tunnel excavation in granular media: the role of force chains; Granular Matter; Vol. 23; No. 4; Art. No. 76; 10.1007/s10035-021-01141-2
Marteau, Eloïse and Andrade, José E. (2021) An Experimental Study of the Effect of Particle Shape on Force Transmission and Mobilized Strength of Granular Materials; Journal of Applied Mechanics; Vol. 88; No. 11; Art. No. 111009; 10.1115/1.4051818
Leguizamón-Barreto, Luis C. and Ramos-Cañón, Alfonso M., el al. (2021) Undrained instability detection under general stress conditions; Acta Geotechnica; Vol. 16; No. 10; 3041-3059; 10.1007/s11440-021-01241-6
Buarque de Macedo, Robert and Andò, Edward, el al. (2021) Unearthing real-time 3D ant tunneling mechanics; Proceedings of the National Academy of Sciences of the United States of America; Vol. 118; No. 36; Art. No. e2102267118; PMCID PMC8433525; 10.1073/pnas.2102267118
Rosakis, Ares J. and Andrade, José E., el al. (2021) Implications of Buckingham's Pi Theorem to the Study of Similitude in Discrete Structures: Introduction of the R_F^N, μ^N, and S^N Dimensionless Numbers and the Concept of Structural Speed; Journal of Applied Mechanics; Vol. 88; No. 9; Art. No. 091008; 10.1115/1.4051338
Wang, Yifan and Li, Liuchi, el al. (2021) Structured fabrics with tunable mechanical properties; Nature; Vol. 596; No. 7871; 238-243; 10.1038/s41586-021-03698-7
Le, Linh A. and Nguyen, Giang D., el al. (2021) Modelling the influence of fines content on the instability of silty sands considering grain scale interactions; International Journal of Plasticity; Vol. 143; Art. No. 103020; 10.1016/j.ijplas.2021.103020
Karapiperis, K. and Stainier, L., el al. (2021) Data-Driven Multiscale Modeling in Mechanics; Journal of the Mechanics and Physics of Solids; Vol. 147; Art. No. 104239; 10.1016/j.jmps.2020.104239
Bhattacharya, Debayan and Kawamoto, Reid, el al. (2021) Mechanical behaviour of granular media in flexible boundary plane strain conditions: experiment and level-set discrete element modelling; Acta Geotechnica; Vol. 16; No. 1; 113-132; 10.1007/s11440-020-00996-8
Karapiperis, K. and Andrade, J. E. (2021) Nonlocality in granular complex networks: Linking topology, kinematics and forces; Extreme Mechanics Letters; Vol. 42; Art. No. 101041; 10.1016/j.eml.2020.101041
Monfared, Siavash and Zhou, Tingtao, el al. (2020) Effect of Confinement on Capillary Phase Transition in Granular Aggregates; Physical Review Letters; Vol. 125; No. 25; Art. No. 255501; 10.1103/PhysRevLett.125.255501
Karapiperis, Konstantinos and Harmon, John, el al. (2020) Investigating the Incremental Behavior of Granular Materials with the Level-Set Discrete Element Method; Journal of the Mechanics and Physics of Solids; Vol. 144; Art. No. 104103; 10.1016/j.jmps.2020.104103
Harmon, John M. and Arthur, Daniel, el al. (2020) Level set splitting in DEM for modeling breakage mechanics; Computer Methods in Applied Mechanics and Engineering; Vol. 365; Art. No. 112961; 10.1016/j.cma.2020.112961
Mital, Utkarsh and Kawamoto, Reid, el al. (2020) Effect of fabric on shear wave velocity in granular soils; Acta Geotechnica; Vol. 15; No. 5; 1189-1203; 10.1007/s11440-019-00766-1
Li, Liuchi and Andrade, José E. (2020) Identifying spatial transitions in heterogenous granular flow; Granular Matter; Vol. 22; No. 2; Art. No. 52; 10.1007/s10035-020-01013-1
Karapiperis, Konstantinos and Marshall, Jason P., el al. (2020) Reduced Gravity Effects on the Strength of Granular Matter: DEM Simulations versus Experiments; Journal of Geotechnical and Geoenvironmental Engineering; Vol. 146; No. 5; Art. No. 06020005; 10.1061/(asce)gt.1943-5606.0002232
Li, Liuchi and Marteau, Eloïse, el al. (2019) Capturing the inter-particle force distribution in granular material using LS-DEM; Granular Matter; Vol. 21; No. 8; Art. No. 43; 10.1007/s10035-019-0893-7
Roshankhah, S. and Marshall, J. P., el al. (2018) Neutron imaging: a new possibility for laboratory observation of hydraulic fractures in shale?; Géotechnique Letters; Vol. 8; No. 4; 316-323; 10.1680/jgele.18.00129
de Macedo, Robert Buarque and Marshall, Jason P., el al. (2018) Granular object morphological generation with genetic algorithms for discrete element simulations; Granular Matter; Vol. 20; No. 11; Art. No. 73; 10.1007/s10035-018-0845-7
Mital, U. M. and Andrade, J. E. (2018) Closure to "Flow Liquefaction Instability as a Mechanism for Lower End of Liquefaction Charts" by Utkarsh Mital, Toktam Mohammadnejad, and José E. Andrade; Journal of Geotechnical and Geoenvironmental Engineering; Vol. 144; No. 9; Art. No. 07018021; 10.1061/(ASCE)GT.1943-5606.0001932
Kawamoto, Reid and Andrade, José, el al. (2018) A 3-D mechanics-based particle shape index for granular materials; Mechanics Research Communications; Vol. 92; 67-73; 10.1016/j.mechrescom.2018.07.002
Golombek, M. and Andrade, J., el al. (2018) Geology and Physical Properties Investigations by the InSight Lander; Space Science Reviews; Vol. 214; Art. No. 84; 10.1007/s11214-018-0512-7
Marteau, Eloïse and Andrade, José E. (2018) A model for decoding the life cycle of granular avalanches in a rotating drum; Acta Geotechnica; Vol. 13; No. 3; 549-555; 10.1007/s11440-017-0609-2
Marshall, Jason P. and Hurley, Ryan C., el al. (2018) Failures in sand in reduced gravity environments; Journal of the Mechanics and Physics of Solids; Vol. 113; 1-12; 10.1016/j.jmps.2018.01.005
Lü, Xilin and Huang, Maosong, el al. (2018) Modeling the static liquefaction of unsaturated sand containing gas bubbles; Soils and Foundations; Vol. 58; No. 1; 122-133; 10.1016/j.sandf.2017.11.008
Kawamoto, Reid and Andò, Edward, el al. (2018) All you need is shape: predicting shear banding in sand with LS-DEM; Journal of the Mechanics and Physics of Solids; Vol. 111; 375-392; 10.1016/j.jmps.2017.10.003
Lü, Xilin and Huang, Maosong, el al. (2017) Predicting the initiation of static liquefaction of cross-anisotropic sands under multiaxial stress conditions; International Journal for Numerical and Analytical Methods in Geomechanics; Vol. 41; No. 17; 1724-1740; 10.1002/nag.2697
Marteau, Eloïse and Andrade, José E. (2017) A novel experimental device for investigating the multiscale behavior of granular materials under shear; Granular Matter; Vol. 19; No. 4; Art. No. 77; 10.1007/s10035-017-0766-x
Poganski, Joshua and Kömle, Norbert I., el al. (2017) Extended Pile Driving Model to Predict the Penetration of the Insight/HP^3 Mole into the Martian Soil; Space Science Reviews; Vol. 211; No. 1-4; 217-236; 10.1007/s11214-016-0302-z
Mital, Utkarsh and Mohammadnejad, Toktam, el al. (2017) Flow Liquefaction Instability as a Mechanism for Lower End of Liquefaction Charts; Journal of Geotechnical and Geoenvironmental Engineering; Vol. 143; No. 9; Art. No. 04017065; 10.1061/(ASCE)GT.1943-5606.0001752
Tahmasebi, Pejman and Sahimi, Muhammad, el al. (2017) Image-Based Modeling of Granular Porous Media; Geophysical Research Letters; Vol. 44; No. 10; 4738-4746; 10.1002/2017GL073938
Nardelli, V. and Coop, M. R., el al. (2017) An experimental investigation of the micromechanics of Eglin sand; Powder Technology; Vol. 312; 166-174; 10.1016/j.powtec.2017.02.009
Jerves, Alex X. and Kawamoto, Reid Y., el al. (2017) A geometry-based algorithm for cloning real grains; Granular Matter; Vol. 19; No. 2; Art. No. 30; 10.1007/s10035-017-0716-7
Vlahinić, Ivan and Kawamoto, Reid, el al. (2017) From computed tomography to mechanics of granular materials via level set bridge; Acta Geotechnica; Vol. 12; No. 1; 85-95; 10.1007/s11440-016-0491-3
Hurley, Ryan C. and Andrade, José E. (2017) Continuum modeling of rate-dependent granular flows in SPH; Computational Particle Mechanics; Vol. 4; No. 1; 119-130; 10.1007/s40571-016-0132-5
Lü, Xilin and Huang, Maosong, el al. (2016) Strength criterion for cross-anisotropic sand under general stress conditions; Acta Geotechnica; Vol. 11; No. 6; 1339-1350; 10.1007/s11440-016-0479-z
Mohammadnejad, T. and Andrade, J. E. (2016) Numerical modeling of hydraulic fracture propagation, closure and reopening using XFEM with application to in-situ stress estimation; International Journal for Numerical and Analytical Methods in Geomechanics; Vol. 40; No. 15; 2033-2060; 10.1002/nag.2512
Mital, Utkarsh and Andrade, José E. (2016) Mechanics of origin of flow liquefaction instability under proportional strain triaxial compression; Acta Geotechnica; Vol. 11; No. 5; 1015-1025; 10.1007/s11440-015-0430-8
Hurley, R. C. and Hall, S. A., el al. (2016) Quantifying interparticle forces and heterogeneity in 3D granular materials; Physical Review Letters; Vol. 117; No. 9; Art. No. 098005; 10.1103/PhysRevLett.117.098005
Jerves, Alex X. and Andrade, José E. (2016) A micro-mechanical study of peak strength and critical state; International Journal for Numerical and Analytical Methods in Geomechanics; Vol. 40; No. 8; 1184-1202; 10.1002/nag.2478
Kawamoto, Reid and Andò, Edward, el al. (2016) Level set discrete element method for three-dimensional computations with triaxial case study; Journal of the Mechanics and Physics of Solids; Vol. 91; 1-13; 10.1016/j.jmps.2016.02.021
Jerves, Alex X. and Kawamoto, Reid Y., el al. (2016) Effects of grain morphology on critical state: a computational analysis; Acta Geotechnica; Vol. 11; No. 3; 493-503; 10.1007/s11440-015-0422-8
Lim, Keng-Wit and Kawamoto, Reid, el al. (2016) Multiscale characterization and modeling of granular materials through a computational mechanics avatar: a case study with experiment; Acta Geotechnica; Vol. 11; No. 2; 243-253; 10.1007/s11440-015-0405-9
Hurley, R. C. and Lim, K. W., el al. (2016) Dynamic Inter-Particle Force Inference in Granular Materials: Method and Application; Experimental Mechanics; Vol. 56; No. 2; 217-229; 10.1007/s11340-015-0063-8
Hurley, Ryan C. and Andrade, José E. (2015) Friction in inertial granular flows: competition between dilation and grain-scale dissipation rates; Granular Matter; Vol. 17; No. 3; 287-295; 10.1007/s10035-015-0564-2
Hurley, Ryan C. and Andrade, José E. (2015) Strength of Granular Materials in Transient and Steady State Rapid Shear; Procedia Engineering; Vol. 103; 237-245; 10.1016/j.proeng.2015.04.032
Mohammadnejad, Toktam and Andrade, José E. (2015) Flow liquefaction instability prediction using finite elements; Acta Geotechnica; Vol. 10; No. 1; 83-100; 10.1007/s11440-014-0342-z
Booth, Adam M. and Hurley, Ryan, el al. (2014) Force chains as the link between particle and bulk friction angles in granular material; Geophysical Research Letters; Vol. 41; No. 24; 8862-8869; 10.1002/2014GL061981
Lim, Keng-Wit and Krabbenhoft, Kristian, el al. (2014) On the contact treatment of non-convex particles in the granular element method; Computational Particle Mechanics; Vol. 1; No. 3; 257-275; 10.1007/s40571-014-0019-2
Lim, Keng-Wit and Andrade, José E. (2014) Granular element method for three-dimensional discrete element calculations; International Journal for Numerical and Analytical Methods in Geomechanics; Vol. 38; No. 2; 167-188; 10.1002/nag.2203
Vlahinić, Ivan and Andò, Edward, el al. (2014) Towards a more accurate characterization of granular media: extracting quantitative descriptors from tomographic images; Granular Matter; Vol. 16; No. 1; 9-21; 10.1007/s10035-013-0460-6
Hurley, Ryan and Marteau, Eloïse, el al. (2014) Extracting inter-particle forces in opaque granular materials: Beyond photoelasticity; Journal of the Mechanics and Physics of Solids; Vol. 63; 154-166; 10.1016/j.jmps.2013.09.013
Lim, Keng-Wit and Krabbenhoft, Kristian, el al. (2014) A contact dynamics approach to the Granular Element Method; Computer Methods in Applied Mechanics and Engineering; Vol. 268; 557-573; 10.1016/j.cma.2013.10.004
Andrade, José E. and Ramos, Alfonso M., el al. (2013) Criterion for flow liquefaction instability; Acta Geotechnica; Vol. 8; No. 5; 525-535; 10.1007/s11440-013-0223-x
Senatore, Carmine and Wulfmeier, Markus, el al. (2013) Design and implementation of a particle image velocimetry method for analysis of running gear–soil interaction; Journal of Terramechanics; Vol. 50; No. 5-6; 311-326; 10.1016/j.jterra.2013.09.004
Andrade, José E. and Lim, Keng-Wit, el al. (2012) Granular element method for computational particle mechanics; Computer Methods in Applied Mechanics and Engineering; Vol. 241-244; 262-274; 10.1016/j.cma.2012.06.012
Vlahinić, Ivan and Thomas, Jeffrey J., el al. (2012) Transient creep effects and the lubricating power of water in materials ranging from paper to concrete and Kevlar; Journal of the Mechanics and Physics of Solids; Vol. 60; No. 7; 1350-1362; 10.1016/j.jmps.2012.03.003
Andrade, José E. and Chen, Qiushi, el al. (2012) On the rheology of dilative granular media: Bridging solid-and fluid-like behavior; Journal of the Mechanics and Physics of Solids; Vol. 60; No. 6; 1122-1136; 10.1016/j.jmps.2012.02.011
Ramos, A. M. and Andrade, J. E., el al. (2012) Modelling diffuse instabilities in sands under drained conditions; Géotechnique; Vol. 62; No. 6; 471-478; 10.1680/geot.10.P.109
Chen, Qiushi and Seifried, Andrew, el al. (2012) Characterization of random fields and their impact on the mechanics of geosystems at multiple scales; International Journal for Numerical and Analytical Methods in Geomechanics; Vol. 36; No. 2; 140-165; 10.1002/nag.999
Andrade, José E. and Avila, Carlos F. (2012) Granular element method (GEM): linking inter-particle forces with macroscopic loading; Granular Matter; Vol. 14; No. 1; 51-61; 10.1007/s10035-011-0298-8
Sun, W. C. and Andrade, J. E., el al. (2011) Multiscale method for characterization of porous microstructures and their impact on macroscopic effective permeability; International Journal for Numerical Methods in Engineering; Vol. 88; No. 12; 1260-1279; 10.1002/nme.3220
Ramos, Alfonso M. and Andrade, José E., el al. (2011) Numerical simulation of the instability line based on laws of physics; DYNA; Vol. 78; No. 170; 24-30
Chen, Qiushi and Andrade, José E., el al. (2011) AES for multiscale localization modeling in granular media; Computer Methods in Applied Mechanics and Engineering; Vol. 200; No. 33-36; 2473-2482; 10.1016/j.cma.2011.04.022
Fonseca, P. C. and Jennings, H. M., el al. (2011) A nanoscale numerical model of calcium silicate hydrate; Mechanics of Materials; Vol. 43; No. 8; 408-419; 10.1016/j.mechmat.2011.05.004
Sun, WaiChing and Andrade, José E., el al. (2011) Connecting microstructural attributes and permeability from 3D tomographic images of in situ shear-enhanced compaction bands using multiscale computations; Geophysical Research Letters; Vol. 38; Art. No. L10302; 10.1029/2011GL047683
Andrade, J. E. and Avila, C. F., el al. (2011) Multiscale modeling and characterization of granular matter: From grain kinematics to continuum mechanics; Journal of the Mechanics and Physics of Solids; Vol. 59; No. 2; 237-250; 10.1016/j.jmps.2010.10.009
Vlahinić, Ivan and Jennings, Hamlin M., el al. (2011) A novel and general form of effective stress in a partially saturated porous material: The influence of microstructure; Mechanics of Materials; Vol. 43; No. 1; 25-35; 10.1016/j.mechmat.2010.09.007