Faber, Katherine

Article from CaltechAUTHORS

• Quinn, Laura K. and Esteves, Remelisa, et el. (2024) Shape memory and superelasticity in polycrystalline ceria-stabilized zirconia honeycombs; Acta Materialia; Vol. 281; 120340; 10.1016/j.actamat.2024.120340
• Yu, Kevin and Stokes, Jamesa, et el. (2024) Thermochemical interactions between yttria‐stabilized zirconia and molten lunar regolith simulants; Journal of the American Ceramic Society; 10.1111/jace.19821
• Chari, C. S. and Heimann, J. E., et el. (2023) Chemical Transformations of 2D Kaolinic Clay Mineral Surfaces from Sulfuric Acid Exposure; Langmuir; Vol. 39; No. 20; 6964-6974; 10.1021/acs.langmuir.3c00113
• Arai, Noriaki and Faber, Katherine T. (2023) Gradient-controlled freeze casting of preceramic polymers; Journal of the European Ceramic Society; Vol. 43; No. 5; 1904-1911; 10.1016/j.jeurceramsoc.2022.12.016
• Chari, C. S. and Faber, K. T. (2022) Oxidation resistance of AlN/BN via mullite-type Al₁₈B₄O₃₃; Journal of the European Ceramic Society; Vol. 42; No. 8; 3437-3445; 10.1016/j.jeurceramsoc.2022.02.037
• Harder, Bryan J. and Good, Brian, et el. (2022) Deposition of electrically conductive zirconium monoxide via plasma spray-physical vapor deposition; Journal of the American Ceramic Society; Vol. 105; No. 5; 3568-3580; 10.1111/jace.18309
• Chari, Celia S. and Taylor, Zane W., et el. (2022) Nanoscale engineering of gold particles in 18th century Böttger lusters and glazes; Proceedings of the National Academy of Sciences of the United States of America; Vol. 119; No. 18; e2120753119; PMCID PMC9170166; 10.1073/pnas.2120753119
• Arai, Noriaki and Faber, Katherine T. (2021) Freeze-cast honeycomb structures via gravity-enhanced convection; Journal of the American Ceramic Society; Vol. 104; No. 9; 4309-4315; 10.1111/jace.17871
• Arai, Noriaki and Stan, Tiberiu, et el. (2021) Coarsening of dendrites in solution-based freeze-cast ceramic systems; Acta Materialia; Vol. 215; Art. No. 117039; 10.1016/j.actamat.2021.117039
• Faber, Katherine T. and Casadio, Francesca, et el. (2021) Looking Back, Looking Forward: Materials Science in Art, Archaeology, and Art Conservation; Annual Review of Materials Research; Vol. 51; 435-460; 10.1146/annurev-matsci-080819-013103
• Kuo, Taijung and Rueschhoff, Lisa M., et el. (2021) Hierarchical porous SiOC via freeze casting and self-assembly of block copolymers; Scripta Materialia; Vol. 191; 204-209; 10.1016/j.scriptamat.2020.09.042
• Brodnik, N. R. and Brach, S., et el. (2021) Fracture Diodes: Directional Asymmetry of Fracture Toughness; Physical Review Letters; Vol. 126; No. 2; Art. No. 025503; 10.1103/physrevlett.126.025503
• Kuo, C. T. and Faber, K. T. (2020) Permeable carbon nanotube-reinforced silicon oxycarbide via freeze casting with enhanced mechanical stability; Journal of the European Ceramic Society; Vol. 40; No. 6; 2470-2479; 10.1016/j.jeurceramsoc.2019.12.059
• Sturdy, Lauren F. and Wright, Madeleine S., et el. (2020) Effects of zinc oxide filler on the curing and mechanical response of alkyd coatings; Polymer; Vol. 191; Art. No. 122222; 10.1016/j.polymer.2020.122222
• Brodnik, Neal R. and Hsueh, Chun-Jen, et el. (2020) Guiding and Trapping Cracks With Compliant Inclusions for Enhancing Toughness of Brittle Composite Materials; Journal of Applied Mechanics; Vol. 87; No. 3; Art. No. 031018; 10.1115/1.4045682
• Zeng, Xiaomei and Martinolich, Andrew J., et el. (2020) Dense garnet-type electrolyte with coarse grains for improved air stability and ionic conductivity; Journal of Energy Storage; Vol. 27; Art. No. 101128; 10.1016/j.est.2019.101128
• Brodnik, N. R. and Schmidt, J., et el. (2020) Analysis of Multi-scale Mechanical Properties of Ceramic Trusses Prepared from Preceramic Polymers; Additive Manufacturing; Vol. 31; Art. No. 100957; 10.1016/j.addma.2019.100957
• Zeng, Xiaomei and Arai, Noriaki, et el. (2019) Robust Cellular Shape-Memory Ceramics via Gradient‐Controlled Freeze Casting; Advanced Engineering Materials; Vol. 21; No. 12; Art. No. 1900398; 10.1002/adem.201900398
• Johnson, M. T. and Brodnik, N. R., et el. (2019) Obreimoff revisited: controlled heterogeneous fracture through the splitting of mica; Mechanics of Materials; Vol. 136; Art. No. 103088; 10.1016/j.mechmat.2019.103088
• Brodnik, Neal R. and Faber, Katherine T. (2019) Out-of-plane mechanical characterization of acicular mullite and aluminum titanate diesel particulate filters; International Journal of Applied Ceramic Technology; Vol. 16; No. 3; 1173-1183; 10.1111/ijac.13161
• Arai, Noriaki and Faber, Katherine T. (2019) Hierarchical porous ceramics via two-stage freeze casting of preceramic polymers; Scripta Materialia; Vol. 162; 72-76; 10.1016/j.scriptamat.2018.10.037
• Buannic, Lucienne and Naviroj, Maninpat, et el. (2019) Dense Freeze‐cast Li_7La_3Zr_2O_(12) Solid Electrolytes with Oriented Open Porosity and Contiguous Ceramic Scaffold; Journal of the American Ceramic Society; Vol. 102; No. 3; 1021-1029; 10.1111/jace.15938
• Tan, Wei Lin and Faber, Katherine T., et el. (2019) In-situ observation of evolving microstructural damage and associated effective electro-mechanical properties of PZT during bipolar electrical fatigue; Acta Materialia; Vol. 164; 704-713; 10.1016/j.actamat.2018.10.065
• Miller, S. M. and Xiao, X., et el. (2018) Freeze-Cast Alumina Pore Networks: Effects of Processing Parameters in Steady-State Solidification Regimes of Aqueous Slurries; Journal of the European Ceramic Society; Vol. 38; No. 15; 5134-5143; 10.1016/j.jeurceramsoc.2018.07.009
• Faber, Katherine T. (2018) Julia Randall Weertman (1926–2018); Nature Materials; Vol. 17; No. 11; 949; 10.1038/s41563-018-0195-1
• Miller, Sarah and Xiao, Xianghui, et el. (2018) Freeze-cast yttria-stabilized zirconia pore networks: Effects of alcohol additives; International Journal of Applied Ceramic Technology; Vol. 15; No. 2; 296-306; 10.1111/ijac.12794
• Naviroj, Maninpat and Voorhees, Peter W., et el. (2017) Suspension- and solution-based freeze casting for porous ceramics; Journal of Materials Research; Vol. 32; No. 17; 3372-3382; 10.1557/jmr.2017.133
• Liu, Zhao and Han, Kai, et el. (2017) X-ray nanotomography analysis of the microstructural evolution of LiMn_2 O_4 electrodes; Journal of Power Sources; Vol. 360; 460-469; 10.1016/j.jpowsour.2017.06.027
• Faber, Katherine T. (2017) The role of ceramic and glass science research in meeting societal challenges: Report from an NSF-sponsored workshop; Journal of the American Ceramic Society; Vol. 100; No. 5; 1777-1803; 10.1111/jace.14881
• Naviroj, Maninpat and Wang, Melody M., et el. (2017) Nucleation-controlled freeze casting of preceramic polymers for uniaxial pores in Si-based ceramics; Scripta Materialia; Vol. 130; 32-36; 10.1016/j.scriptamat.2016.10.038
• Johnson, M. T. and Keck, C. H. C., et el. (2017) Experimental Model Validation of High Aspect Ratio Through-Hole Filling by Additive-Assisted Copper Electrodeposition; Journal of the Electrochemical Society; Vol. 164; No. 2; D48-D52; 10.1149/2.0391702jes
• Childers, A. S. and Brodnik, N. R., et el. (2016) Interfacial frictional stresses and fracture toughness of biomorphic graphite/copper interfaces; Materials Letters; Vol. 174; 106-109; 10.1016/j.matlet.2016.03.065
• Stolzenburg, F. and Kenesei, P., et el. (2016) The influence of calcium–magnesium–aluminosilicate deposits on internal stresses in Yb_2Si_2O_7 multilayer environmental barrier coatings; Acta Materialia; Vol. 105; 189-198; 10.1016/j.actamat.2015.12.016
• Liu, Zhao and Chen-Wiegart, Yu-chen K., et el. (2016) Three-Phase 3D Reconstruction of a LiCoO_2 Cathode via FIB-SEM Tomography; Microscopy and Microanalysis; Vol. 22; No. 01; 140-148; 10.1017/S1431927615015640
• Stolzenburg, F. and Johnson, M. T., et el. (2015) The interaction of calcium–magnesium–aluminosilicate with ytterbium silicate environmental barrier materials; Surface and Coatings Technology; Vol. 284; 44-50; 10.1016/j.surfcoat.2015.08.069
• Miller, S. M. and Xiao, X., et el. (2015) Freeze-cast alumina pore networks: Effects of freezing conditions and dispersion medium; Journal of the European Ceramic Society; Vol. 35; No. 13; 3595-3605; 10.1016/j.jeurceramsoc.2015.05.012
• Simsek, Gulsu and Colomban, Philippe, et el. (2015) On-Site Identification of Early Böttger Red Stoneware Using Portable XRF/Raman Instruments: 2, Glaze & Gilding Analysis; Journal of the American Ceramic Society; Vol. 98; No. 10; 3006-3013; 10.1111/jace.13720
• Naviroj, M. and Miller, S. M., et el. (2015) Directionally aligned macroporous SiOC via freeze casting of preceramic polymers; Journal of the European Ceramic Society; Vol. 35; No. 8; 2225-2232; 10.1016/j.jeurceramsoc.2015.02.013
• Simsek, Gulsu and Casadio, Francesca, et el. (2014) On-Site Identification of Early BÖTTGER Red Stoneware Made at Meissen Using Portable XRF: 1, Body Analysis; Journal of the American Ceramic Society; Vol. 97; No. 9; 2745-2754; 10.1111/jace.13032
• Shanti, Noah O. and Chan, Victor W. L., et el. (2014) X-ray micro-computed tomography and tortuosity calculations of percolating pore networks; Acta Materialia; Vol. 71; 126-135; 10.1016/j.actamat.2014.03.003
• Johnson, M. T. and Childers, A. S., et el. (2013) Wood-derived copper–graphite composites produced via additive-assisted electrodeposition; Composites Science and Technology; Vol. 89; 61-68; 10.1016/j.compscitech.2013.09.010
• Ramírez-Rico, J. and Stolzenburg, F., et el. (2013) In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite; Scripta Materialia; Vol. 69; No. 7; 497-500; 10.1016/j.scriptamat.2013.05.032
• Johnson, M. T. and Childers, A. S., et el. (2013) Thermal conductivity of wood-derived graphite and copper–graphite composites produced via electrodeposition; Composites Part A: Applied Science and Manufacturing; Vol. 53; 182-189; 10.1016/j.compositesa.2013.06.009
• Faber, Katherine T. (2013) Small Volumes Create Super(elastic) Effects; Science; Vol. 341; No. 6153; 1464-1465; 10.1126/science.1245097
• Hsiung, C.-H. H. and Pyzik, A. J., et el. (2013) Impact of doping on the mechanical properties of acicular mullite; Journal of the European Ceramic Society; Vol. 33; No. 10; 1955-1965; 10.1016/j.jeurceramsoc.2013.02.006
• Childers, A. S. and Johnson, M. T., et el. (2013) Modeling Macro-Sized, High Aspect Ratio Through-Hole Filling by Multi-Component Additive-Assisted Copper Electrodeposition; Journal of the Electrochemical Society; Vol. 160; No. 12; D3093-D3102; 10.1149/2.018312jes
• Faber, Katherine T. and Lara-Curzio, Edgar (2013) Emerging Opportunities in Ceramics: Reports from the 4th International Congress on Ceramics; International Journal of Applied Ceramic Technology; Vol. 10; No. 3; 377-378; 10.1111/ijac.12089
• Liu, Zhao and Cronin, J. Scott, et el. (2013) Three-dimensional morphological measurements of LiCoO_2 and LiCoO_2/Li (Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 lithium-ion battery cathodes; Journal of Power Sources; Vol. 227; 267-274; 10.1016/j.jpowsour.2012.11.043
• Chen-Wiegart, Yu-chen Karen and Liu, Zhao, et el. (2013) 3D analysis of a LiCoO_2-Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 Li-ion battery positive electrode using x-ray nano-tomography; Electrochemistry Communications; Vol. 28; 127-130; 10.1016/j.elecom.2012.12.021
• Hsiung, C.-H. H. and Pyzik, A. J., et el. (2013) Microstructure and mechanical properties of acicular mullite; Journal of the European Ceramic Society; Vol. 33; No. 3; 503-513; 10.1016/j.jeurceramsoc.2012.09.017
• Rohrer, Gregory S. and Affatigato, Mario, et el. (2012) Challenges in Ceramic Science: A Report from the Workshop on Emerging Research Areas in Ceramic Science; Journal of the American Ceramic Society; Vol. 95; No. 12; 3699-3712; 10.1111/jace.12033
• Shanti, N. O. and Bierschenk, D. M., et el. (2012) Direct lamination of solid oxide fuel cell anode support, anode, and electrolyte by sequential tape casting of thermoreversible gel slips; Journal of Power Sources; Vol. 212; 43-46; 10.1016/j.jpowsour.2012.03.073
• Shanti, N. O. and DeNolf, G. C., et el. (2012) Liquid Desiccant Solvent Extraction of Alumina-Filled Thermoreversible Gels; Journal of the American Ceramic Society; Vol. 95; No. 2; 509-514; 10.1111/j.1551-2916.2011.04884.x
• Harder, Bryan J. and Ramírez-Rico, Joaquin, et el. (2011) Chemical and Mechanical Consequences of Environmental Barrier Coating Exposure to Calcium-Magnesium-Aluminosilicate; Journal of the American Ceramic Society; Vol. 94; No. S1; S178-S185; 10.1111/j.1551-2916.2011.04448.x
• Johnson, M. T. and Faber, K. T. (2011) Catalytic graphitization of three-dimensional wood-derived porous scaffolds; Journal of Materials Research; Vol. 26; No. 1; 18-25; 10.1557/jmr.2010.88
• Chen, Z. and Sucech, S., et el. (2010) A hierarchical study of the mechanical properties of gypsum; Journal of Materials Science; Vol. 45; No. 16; 4444-4453; 10.1007/s10853-010-4527-z
• Parfen'eva, L. S. and Orlova, T. S., et el. (2010) Thermal conductivity of the pine-biocarbon-preform/copper composite; Physics of the Solid State; Vol. 52; No. 7; 1348-1355; 10.1134/S1063783410070048
• Parfen'eva, L. S. and Orlova, T. S., et el. (2010) Thermal conductivity of high-porosity biocarbon preforms of beech wood; Physics of the Solid State; Vol. 52; No. 6; 1115-1122; 10.1134/S1063783410060028
• Harder, B. J. and Faber, K. T. (2010) Transformation kinetics in plasma-sprayed barium- and strontium-doped aluminosilicate (BSAS); Scripta Materialia; Vol. 62; No. 5; 282-285; 10.1016/j.scriptamat.2009.11.019
• Pappacena, K. E. and Johnson, M. T., et el. (2010) Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition; Composites Science and Technology; Vol. 70; No. 3; 478-484; 10.1016/j.compscitech.2009.11.011
• Pappacena, K. E. and Johnson, M. T., et el. (2010) Processing of wood-derived copper–silicon carbide composites via electrodeposition; Composites Science and Technology; Vol. 70; No. 3; 485-491; 10.1016/j.compscitech.2009.12.019
• Weyant, C. M. and Almer, J., et el. (2010) Through-thickness determination of phase composition and residual stresses in thermal barrier coatings using high-energy X-rays; Acta Materialia; Vol. 58; No. 3; 943-951; 10.1016/j.actamat.2009.10.010
• Wilkes, T.E. and Harder, B.J., et el. (2009) Load partitioning in honeycomb-like silicon carbide aluminum alloy composites; Acta Materialia; Vol. 57; No. 20; 6234-6242; 10.1016/j.actamat.2009.08.050
• Kardashev, B. K. and Orlova, T. S., et el. (2009) Young's modulus and internal friction in porous biocarbon white pine wood precursors; Physics of the Solid State; Vol. 51; No. 12; 2463-2468; 10.1134/S1063783409120063
• Smirnov, I. A. and Orlova, T. S., et el. (2009) Heat Capacity of the White Pine Biocarbon Preform and the Related Biocarbon/Copper Composite; Physics of the Solid State; Vol. 51; No. 11; 2264-2268; 10.1134/S1063783409110110
• Pappacena, K. E. and Gentry, S. P., et el. (2009) Effect of pyrolyzation temperature on wood-derived carbon and silicon carbide; Journal of the European Ceramic Society; Vol. 29; No. 14; 3069-3077; 10.1016/j.jeurceramsoc.2009.04.040
• Shanti, Noah O. and Hovis, David B., et el. (2009) Ceramic Laminates by Gelcasting; International Journal of Applied Ceramic Technology; Vol. 6; No. 5; 593-606; 10.1111/j.1744-7402.2008.02312.x
• Seitz, M. E. and Shull, K. R., et el. (2009) Acrylic Triblock Copolymer Design for Thermoreversible Gelcasting of Ceramics: Rheological and Green Body Properties; Journal of the American Ceramic Society; Vol. 92; No. 7; 1519-1525; 10.1111/j.1551-2916.2009.03059.x
• Wilkes, T. E. and Stock, S. R., et el. (2009) X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites; Philosophical Magazine; Vol. 89; No. 17; 1373-1389; 10.1080/14786430902956457
• Harder, B. J. and Almer, J. D., et el. (2009) In situ stress analysis of multilayer environmental barrier coatings; Powder Diffraction; Vol. 24; No. 2; 94-98; 10.1154/1.3120602
• Harder, B. J. and Almer, J. D., et el. (2009) Residual Stress Analysis of Multilayer Environmental Barrier Coatings; Journal of the American Ceramic Society; Vol. 92; No. 2; 452-459; 10.1111/j.1551-2916.2008.02888.x
• Parfen'eva, L. S. and Orlova, T. S., et el. (2008) Thermal conductivity of high-porosity biocarbon precursors of white pine wood; Physics of the Solid State; Vol. 50; No. 12; 2245-2255; 10.1134/S1063783408120032
• Kardashev, B. K. and Orlova, T. S., et el. (2008) Elasticity and inelasticity of the SiC/Al-13Si-9Mg biomorphic metal ceramics; Physics of the Solid State; Vol. 50; No. 10; 1882-1887; 10.1134/S1063783408100168
• Weyant, C. M. and Faber, K. T. (2008) Processing–microstructure relationships for plasma-sprayed yttrium aluminum garnet; Surface and Coatings Technology; Vol. 202; No. 24; 6081-6089; 10.1016/j.surfcoat.2008.07.008
• Wilkes, T. E. and Pastor, J. Y., et el. (2008) Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature; Journal of Materials Research; Vol. 23; No. 6; 1732-1743; 10.1557/JMR.2008.0197
• Kaul, V. S. and Faber, K. T. (2008) Nanoindentation analysis of the elastic properties of porous SiC derived from wood; Scripta Materialia; Vol. 58; No. 10; 886-889; 10.1016/j.scriptamat.2008.01.018
• Hovis, D. B. and Faber, K. T., et el. (2008) Texture and microstructural development in gelcast barium hexaferrite; Journal of Materials Science; Vol. 43; No. 6; 1836-1843; 10.1007/s10853-007-2375-2
• Faber, K. T. and Weyant, C. M., et el. (2007) Internal stresses and phase stability in multiphase environmental barrier coatings; International Journal of Materials Research; Vol. 98; No. 12; 1188-1195; 10.3139/146.101590
• Pappacena, K. E. and Faber, K. T., et el. (2007) Thermal Conductivity of Porous Silicon Carbide Derived from Wood Precursors; Journal of the American Ceramic Society; Vol. 90; No. 9; 2855-2862; 10.1111/j.1551-2916.2007.01777.x
• Seitz, Michelle E. and Burghardt, Wesley R., et el. (2007) Self-Assembly and Stress Relaxation in Acrylic Triblock Copolymer Gels; Macromolecules; Vol. 40; No. 4; 1218-1226; 10.1021/ma061993+
• Casadio, Francesca and Douglas, Janet G., et el. (2007) Noninvasive methods for the investigation of ancient Chinese jades: an integrated analytical approach; Analytical and Bioanalytical Chemistry; Vol. 387; No. 3; 791-801; 10.1007/s00216-006-0684-y
• Wilkes, T. E. and Young, M. L., et el. (2006) Composites by aluminum infiltration of porous silicon carbide derived from wood precursors; Scripta Materialia; Vol. 55; No. 12; 1083-1086; 10.1016/j.scriptamat.2006.08.040
• Kaul, V. S. and Faber, K. T., et el. (2006) Precursor selection and its role in the mechanical properties of porous SiC derived from wood; Materials Science and Engineering A; Vol. 428; No. 1-2; 225-232; 10.1016/j.msea.2006.05.033
• Weyant, C. M. and Faber, K. T., et el. (2006) Residual stress and microstructural evolution in environmental barrier coatings of tantalum oxide alloyed with aluminum oxide and lanthanum oxide; Journal of the American Ceramic Society; Vol. 89; No. 3; 971-978; 10.1111/j.1551-2916.2005.00830.x
• Weyant, C. M. and Faber, K. T., et el. (2005) Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride; Journal of the American Ceramic Society; Vol. 88; No. 8; 2169-2176; 10.1111/j.1551-2916.2005.00396.x
• Montgomery, John K. and Faber, K. T. (2005) Processing and surface flaw tolerance of alumina bilayers; Journal of the American Ceramic Society; Vol. 88; No. 2; 287-292; 10.1111/j.1551-2916.2005.00073.x
• Kaul, Vikram S. and Faber, K. T. (2005) Synthetic crossed-lamellar microstructures in oxide ceramics; Journal of Ceramic Processing Research; Vol. 6; No. 3; 218-222
• Su, Y. J. and Trice, R. W., et el. (2004) Thermal conductivity, phase stability, and oxidation resistance of Y_3Al_5O_(12) (YAG)/Y_2O_3-ZrO_2 (YSZ) thermal-barrier coatings; Oxidation of Metals; Vol. 61; No. 3-4; 253-271; 10.1023/B:OXID.0000025334.02788.d3
• Zhu, Dongming and Vaßen, Robert, et el. (2004) Editorial; Journal of Thermal Spray Technology; Vol. 13; No. 1; 3; 10.1007/s11666-004-0039-1
• Moldovan, Monica and Weyant, C. M., et el. (2004) Tantalum oxide coatings as candidate environmental barriers; Journal of Thermal Spray Technology; Vol. 13; No. 1; 51-56; 10.1007/s11666-004-0049-z
• Montgomery, John K. and Botha, Adele S., et el. (2003) A thermoreversible gelcasting technique for ceramic laminates; Scripta Materialia; Vol. 48; No. 6; 785-789; 10.1016/S1359-6462(02)00517-1
• Trice, R. W. and Su, Y. Jennifer, et el. (2002) Effect of heat treatment on phase stability, microstructure, and thermal conductivity of plasma-sprayed YSZ; Journal of Materials Science; Vol. 37; No. 11; 2359-2365; 10.1023/A:1015310509520
• Gaies, D. and Faber, K. T. (2002) Thermal properties of pitch-derived graphite foam; Carbon; Vol. 40; No. 7; 1137-1140; 10.1016/S0008-6223(02)00099-4
• Montgomery, John K. and Drzal, Peter L., et el. (2002) Thermoreversible gelcasting: A novel ceramic processing technique; Journal of the American Ceramic Society; Vol. 85; No. 5; 1164-1168; 10.1111/j.1151-2916.2002.tb00239.x
• Su, Y. J. and Bernecki, T. F., et el. (2002) In situ characterization of small-particle plasma sprayed powders; Journal of Thermal Spray Technology; Vol. 11; No. 1; 52-61; 10.1361/105996302770348970
• Trice, R. W. and Batson, C., et el. (2002) The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings; Journal of Materials Science; Vol. 37; No. 3; 629-636; 10.1023/A:1013738112206
• Anderson, Iver E. and Schwartz, Lyle H., et el. (2002) Materials education: opportunities over a lifetime. A report on the 17th Biannual Conference of National Materials Policy, College Park, Maryland, USA, May 20-21, 2002; Journal of Materials Education; Vol. 24; No. 4-6; 185-202
• Zimmerman, M. H. and Baskin, D. M., et el. (2001) Fracture of a textured anisotropic ceramic; Acta Materialia; Vol. 49; No. 16; 3231-3242; 10.1016/S1359-6454(01)00224-5
• Su, Y. Jennifer and Wang, Hsin, et el. (2001) Thermal conductivity and phase evolution of plasma-sprayed multilayer coatings; Journal of Materials Science; Vol. 36; No. 14; 3511-3518; 10.1023/A:1017932617123
• Mawdsley, Jennifer R. and Su, Y. Jennifer, et el. (2001) Optimization of small-particle plasma-sprayed alumina coatings using designed experiments; Materials Science and Engineering A; Vol. 308; No. 1-2; 189-199; 10.1016/S0921-5093(00)01992-4
• Hovis, David B. and Faber, K. T. (2001) Textured microstructures in barium hexaferrite by magnetic field assisted gelcasting and templated grain growth; Scripta Materialia; Vol. 44; No. 11; 2525-2529; 10.1016/S1359-6462(01)00957-5
• Easley, Thomas C. and Faber, K. T., et el. (2001) Moiré interferometry analysis of fiber debonding; Journal of Engineering Mechanics; Vol. 127; No. 6; 625-629; 10.1061/(ASCE)0733-9399(2001)127:6(625)
• Torrents, Josep M. and Easley, Thomas C., et el. (2001) Evolution of impedance spectra during debonding and pullout of single steel fibers from cement; Journal of the American Ceramic Society; Vol. 84; No. 4; 740-746; 10.1111/j.1151-2916.2001.tb00735.x
• Boling-Risser, Martha A. and Goretta, K. C., et el. (2000) Effect of microstructure on high-temperature compressive creep of self-reinforced hot-pressed silicon nitride; Journal of the American Ceramic Society; Vol. 83; No. 12; 3065-3069; 10.1111/j.1151-2916.2000.tb01683.x
• Trice, Rodney W. and Prine, David W., et el. (2000) Deformation mechanisms in compression-loaded, stand-alone plasma-sprayed alumina coatings; Journal of the American Ceramic Society; Vol. 83; No. 12; 3057-3064; 10.1111/j.1151-2916.2000.tb01682.x
• de Arellano López, A. Ramírez and Chiou, W. A., et el. (2000) Estudio comparativo de técnicas de preparación de muestraspara microscopía electrónica de transmisión de recubrimientos cerámicos proyectados por plasma; Boletín de la Sociedad Española de Cerámica y Vidrio; Vol. 39; No. 6; 735-740
• Trice, Rodney W. and Brewer, Luke N., et el. (2000) The dissociation of NZP (Ca_(0.5)Sr_(0.5)Zr_4P_6O_(24)) during plasma spraying during plasma spraying; Scripta Materialia; Vol. 42; No. 9; 855-860; 10.1016/S1359-6462(00)00303-1
• Trice, Rodney W. and Faber, K. T. (2000) Role of lamellae morphology on the microstructural development and mechanical properties of small-particle plasma-sprayed alumina; Journal of the American Ceramic Society; Vol. 83; No. 4; 889-896; 10.1111/j.1151-2916.2000.tb01290.x
• Montgomery, J. K. and Faber, K. T. (2000) Processing of stepped-density alumina via gelcasting and reaction bonding techniques; Scripta Materialia; Vol. 42; No. 3; 283-287; 10.1016/S1359-6462(99)00342-5
• Easley, Thomas C. and Faber, K. T., et el. (1999) Use of a crack-bridging single-fiber pullout test to study steel fiber/cementitious matrix composites; Journal of the American Ceramic Society; Vol. 82; No. 12; 3513-3520; 10.1111/j.1151-2916.1999.tb02274.x
• Trice, Rodney W. and Su, Y. Jennifer, et el. (1999) The role of NZP additions in plasma-sprayed YSZ: microstructure, thermal conductivity and phase stability effects; Materials Science and Engineering A; Vol. 272; No. 2; 284-291; 10.1016/S0921-5093(99)00468-2
• de Arellano-López, Antonio R. and Faber, K. T. (1999) Microstructural characterization of small-particle plasma spray coatings; Journal of the American Ceramic Society; Vol. 82; No. 8; 2204-2208; 10.1111/j.1151-2916.1999.tb02063.x
• Tandon, S. and Faber, K. T. (1999) Effects of loading rate on the fracture of cementitious materials; Cement and Concrete Research; Vol. 29; No. 3; 397-406; 10.1016/S0008-8846(98)00223-3
• Tandon, S. and Faber, K. T. (1998) The influence of loading rate on crack bridging processes in Al_2O_3; Acta Materialia; Vol. 46; No. 10; 3547-3555; 10.1016/S1359-6454(98)00023-8
• Saigal, Anil and Fuller, Edwin R., Jr., et el. (1998) Effect of interface properties on microcracking of iron titanate; Scripta Materialia; Vol. 38; No. 9; 1449-1453; 10.1016/S1359-6462(98)00040-2
• Baskin, Donald M. and Faber, Katherine T., et el. (1997) Forming tough, single phase laminates of Fe_2TiO_5 via magnetic-assisted gelcasting; Journal of the Japan Institute of Metals; Vol. 61; No. 12; 1306-1310
• Baskin, Donald M. and Zimmerman, Michael H., et el. (1997) Forming single-phase laminates via the gelcasting technique; Journal of the American Ceramic Society; Vol. 80; No. 11; 2929-2932; 10.1111/j.1151-2916.1997.tb03213.x
• Zimmerman, Michael H. and Faber, K. T., et el. (1997) Forming textured microstructures via the gelcasting technique; Journal of the American Ceramic Society; Vol. 80; No. 10; 2725-2729; 10.1111/j.1151-2916.1997.tb03184.x
• Faber, K. T. (1997) Ceramic composite interfaces: Properties and design; Annual Review of Materials Science; Vol. 27; 499-524; 10.1146/annurev.matsci.27.1.499
• Jin, D. S. and Husmann, A., et el. (1997) Controlled symmetry breaking in superconducting UPt_3; Physical Review Letters; Vol. 78; No. 9; 1775-1778; 10.1103/PhysRevLett.78.1775
• Knepfler, C. A. and Faber, K. T., et el. (1997) High temperature stability and thermal expansion behavior of molybdenum-chromium M_2C carbides; Journal of Alloys and Compounds; Vol. 248; No. 1-2; 139-142; 10.1016/S0925-8388(96)02442-5
• Christensen, R. J. and Faber, K. T. (1997) Cyclic fatigue of reaction-bonded silicon nitride at elevated temperatures; Journal of Materials Science; Vol. 32; No. 4; 949-955; 10.1023/A:1018509902025
• Cazzato, Anthony and Faber, K. T. (1997) Fracture energy of glass-alumina interfaces via the bimaterial bend test; Journal of the American Ceramic Society; Vol. 80; No. 1; 181-188; 10.1111/j.1151-2916.1997.tb02808.x
• Paulik, S. W. and Zimmerman, M. H., et el. (1996) Residual stress in ceramics with large thermal expansion anisotropy; Journal of Materials Research; Vol. 11; No. 11; 2795-2803; 10.1557/JMR.1996.0354
• Zimmerman, Michael H. and Faber, K. T., et el. (1996) Texture assessment of magnetically processed iron titanate; Journal of the American Ceramic Society; Vol. 79; No. 5; 1389-1393; 10.1111/j.1151-2916.1996.tb08600.x
• Day, P. S. and Skamser, D. J., et el. (1996) Damage tolerance of silicon carbide- and alumina-matrix surface composites; Journal of the American Ceramic Society; Vol. 79; No. 4; 1117-1120; 10.1111/j.1151-2916.1996.tb08558.x
• Tandon, S. and Faber, K. T. (1996) On loading rate effects in toughening processes; Scripta Materialia; Vol. 34; No. 5; 757-762; 10.1016/1359-6462(95)00586-2
• Christensen, Renee J. and Faber, K. T. (1996) Room-Temperature Cyclic Fatigue of Reaction-Bonded Silicon Nitride Using the Double Cleavage Drilled Compression Specimen; Journal of the American Ceramic Society; Vol. 79; No. 2; 425-429; 10.1111/j.1151-2916.1996.tb08139.x
• Tandon, S. and Faber, K. T., et el. (1995) Cohesive crack modeling of influence of sudden changes in loading rate on concrete fracture; Engineering Fracture Mechanics; Vol. 52; No. 6; 987-997; 10.1016/0013-7944(95)00080-F
• Steyer, Todd E. and Faber, K. T. (1995) Mechanical Behavior of Alumina Reinforced with Carbon-Coated Silicon Carbide Whiskers; Journal of the American Ceramic Society; Vol. 78; No. 10; 2673-2679; 10.1111/j.1151-2916.1995.tb08039.x
• Steyer, Todd E. and Faber, K. T., et el. (1995) Fracture strength of free‐standing chemically vapor‐deposited diamond films; Applied Physics Letters; Vol. 66; No. 23; 3105-3107; 10.1063/1.113617
• Gu, W.-H. and Faber, K. T. (1995) Tensile Behavior of Microcracking SiC-TiB_2 Composites; Journal of the American Ceramic Society; Vol. 78; No. 6; 1507-1512; 10.1111/j.1151-2916.1995.tb08845.x
• Mumm, D. R. and Faber, K. T. (1995) Interfacial debonding and sliding in brittle-matrix composites measured using an improved fiber pullout technique; Acta Metallurgica et Materialia; Vol. 43; No. 3; 1259-1270; 10.1016/0956-7151(94)00294-R
• Bažant, Zdeněk P. and Gu, Wei-Hwa, et el. (1995) Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete; ACI Materials Journal; Vol. 92; No. 1; 3-9; 10.14359/1171
• Paulik, Steven W. and Faber, K. T., et el. (1994) Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy; Journal of the American Ceramic Society; Vol. 77; No. 2; 454-458; 10.1111/j.1151-2916.1994.tb07014.x
• Jordan, D. W. and Faber, K. T. (1993) X-ray residual stress analysis of a ceramic thermal barrier coating undergoing thermal cycling; Thin Solid Films; Vol. 235; No. 1-2; 137-141; 10.1016/0040-6090(93)90256-O
• Cai, Hongda and Faber, K. T. (1993) Effective dilatational transformation toughening in brittle materials; Scripta Metallurgica et Materialia; Vol. 28; No. 9; 1161-1166; 10.1016/0956-716X(93)90027-P
• Mumm, Daniel R. and Faber, K. T., et el. (1993) High-Temperature Hardness of Chemically Vapor-Deposited Diamond; Journal of the American Ceramic Society; Vol. 76; No. 1; 238-240; 10.1111/j.1151-2916.1993.tb03716.x
• Gu, W.-H. and Faber, K. T., et el. (1992) Microcracking and R-curve behavior in SiC-TiB_2 composites; Acta Metallurgica et Materialia; Vol. 40; No. 11; 3121-3128; 10.1016/0956-7151(92)90475-T
• Cai, Hongda and Faber, K. T., et el. (1992) Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites; Journal of the American Ceramic Society; Vol. 75; No. 11; 3111-3117; 10.1111/j.1151-2916.1992.tb04395.x
• Kilius, D. E. and Faber, K. T. (1992) Process zone formation in cement-aggregate composites; Journal of Materials Science Letters; Vol. 11; No. 17; 1167-1169; 10.1007/BF00730273
• Cai, H. and Faber, K. T. (1992) On the Use of Approximation Methods for Microcrack Shielding Problems; Journal of Applied Mechanics; Vol. 59; No. 3; 497-501; 10.1115/1.2893751
• Cai, Hongda and Moran, B., et el. (1991) Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening; Journal of the American Ceramic Society; Vol. 74; No. 7; 1695-1698; 10.1111/j.1151-2916.1991.tb07164.x
• Baker, Theresa L. and Faber, K. T., et el. (1991) Ferroelastic Toughening in Bismuth Vanadate; Journal of the American Ceramic Society; Vol. 74; No. 7; 1619-1623; 10.1111/j.1151-2916.1991.tb07148.x
• Conner, C. L. and Faber, K. T. (1990) Segregant-enhanced fracture in magnesium oxide; Journal of Materials Science; Vol. 25; No. 6; 2737-2742; 10.1007/BF00584873
• Magley, David J. and Winholtz, R. A., et el. (1990) Residual Stresses in a Two-Phase Microcracking Ceramic; Journal of the American Ceramic Society; Vol. 73; No. 6; 1641-1644; 10.1111/j.1151-2916.1990.tb09808.x
• Goettler, R. W. and Faber, K. T. (1990) Interfacial shear stresses in fiber-reinforced glasses; Composites Science and Technology; Vol. 37; No. 1-3; 129-147; 10.1016/0266-3538(90)90096-N
• Rai, R. S. and Guruswamy, S., et el. (1989) Dislocation structures in In-doped and undoped GaAs deformed at 700-1100°C; Philosophical Magazine A; Vol. 60; No. 3; 339-353; 10.1080/01418618908213866
• Guruswamy, S. and Rai, R. S., et el. (1989) Influence of solute doping on the high-temperature deformation behavior of GaAs; Journal of Applied Physics; Vol. 65; No. 6; 2508-2512; 10.1063/1.342797
• Faber, Katherine T. and Iwagoshi, Thawi, et el. (1988) Toughening by Stress-Induced Microcracking in Two-Phase Ceramics; Journal of the American Ceramic Society; Vol. 71; No. 9; C399-C401; 10.1111/j.1151-2916.1988.tb06419.x
• Guruswamy, S. and Rai, R. S., et el. (1987) Deformation behavior of undoped and In-doped GaAs in the temperature range 700–1100 °C; Journal of Applied Physics; Vol. 62; No. 10; 4130-4134; 10.1063/1.339129
• Bowling, Gregory D. and Faber, K. T., et el. (1987) Computer Simulations of R-Curve Behavior in Microcracking Materials; Journal of the American Ceramic Society; Vol. 70; No. 11; 849-854; 10.1111/j.1151-2916.1987.tb05639.x
• Clarke, D. R. and Faber, K. T. (1987) Fracture of ceramics and glasses; Journal of Physics and Chemistry of Solids; Vol. 48; No. 11; 1115-1157; 10.1016/0022-3697(87)90121-1
• Guruswamy, S. and Hirth, J. P., et el. (1986) High-temperature hardness of Ga_(1−x)In_xAs; Journal of Applied Physics; Vol. 60; No. 12; 4136-4140; 10.1063/1.337495
• Faber, K. T. and Advani, S. H., et el. (1986) Frictional Stress Evaluation along the Fiber-Matrix Interface in Ceramic Matrix Composites; Journal of the American Ceramic Society; Vol. 69; No. 9; C208-C209; 10.1111/j.1151-2916.1986.tb07480.x
• Johnson-Walls, D. and Drory, M. D., et el. (1985) Evaluation of Reliability of Brittle Components by Thermal Stress Testing; Journal of the American Ceramic Society; Vol. 68; No. 7; 363-367; 10.1111/j.1151-2916.1985.tb10143.x
• Evans, A. G. and Faber, K. T. (1984) Crack-Growth Resistance of Microcracking Brittle Materials; Journal of the American Ceramic Society; Vol. 67; No. 4; 255-260; 10.1111/j.1151-2916.1984.tb18842.x
• Faber, K. T. and Evans, Anthony G. (1983) Intergranular Crack-Deflection Toughening in Silicon Carbide; Journal of the American Ceramic Society; Vol. 66; No. 6; C94-C96; 10.1111/j.1151-2916.1983.tb10084.x
• Faber, K. T. and Evans, A. G. (1983) Crack deflection processes—II. Experiment; Acta Metallurgica; Vol. 31; No. 4; 577-584; 10.1016/0001-6160(83)90047-0
• Faber, K. T. and Evans, A. G. (1983) Crack deflection processes—I. Theory; Acta Metallurgica; Vol. 31; No. 4; 565-576; 10.1016/0001-6160(83)90046-9
• Van Tendeloo, G and Faber, K. T., et el. (1983) Characterization of AIN ceramics containing long-period polytypes; Journal of Materials Science; Vol. 18; No. 2; 525-532; 10.1007/BF00560642
• Rindone, G. E. and Faber, K. T., et el. (1982) Glass microstructure characterization by laser light scattering, small angle X-ray scattering and electron microscopy; Journal of Non-Crystalline Solids; Vol. 49; No. 1-3; 253-262; 10.1016/0022-3093(82)90123-5
• Evans, A. G. and Faber, K. T. (1981) Toughening of Ceramics by Circumferential Microcracking; Journal of the American Ceramic Society; Vol. 64; No. 7; 394-398; 10.1111/j.1151-2916.1981.tb09877.x
• Faber, K. T. and Huang, M. D., et el. (1981) Quantitative Studies of Thermal Shock Based Upon a Novel Test Technique; Journal of the American Ceramic Society; Vol. 64; No. 5; 296-301; 10.1111/j.1151-2916.1981.tb09606.x
• Faber, K. T. and Rindone, G. E. (1980) Small Angle X-ray Scattering and Transmission Electron Microscopy of Water Containing Phase Separated Soda Lime Silica Glasses; Physics and Chemistry of Glasses; Vol. 21; No. 5; 171-177
• Faber, K. T. and Landingham, R. L. (1977) The separation, identification and characterization of radioactive particles in topsoil; Powder Technology; Vol. 16; No. 2; 209-216; 10.1016/0032-5910(77)87008-3