Faber, Katherine
Quinn, Laura K. and Esteves, Remelisa, et el. (2024) Shape memory and superelasticity in polycrystalline ceria-stabilized zirconia honeycombs ; Acta Materialia; Vol. 281; 120340; 10.1016/j.actamat.2024.120340
Yu, Kevin and Stokes, Jamesa, et el. (2024) Thermochemical interactions between yttria‐stabilized zirconia and molten lunar regolith simulants ; Journal of the American Ceramic Society; 10.1111/jace.19821
Chari, C. S. and Heimann, J. E., et el. (2023) Chemical Transformations of 2D Kaolinic Clay Mineral Surfaces from Sulfuric Acid Exposure ; Langmuir; Vol. 39; No. 20; 6964-6974; 10.1021/acs.langmuir.3c00113
Arai, Noriaki and Faber, Katherine T. (2023) Gradient-controlled freeze casting of preceramic polymers ; Journal of the European Ceramic Society; Vol. 43; No. 5; 1904-1911; 10.1016/j.jeurceramsoc.2022.12.016
Chari, C. S. and Faber, K. T. (2022) Oxidation resistance of AlN/BN via mullite-type Al₁₈B₄O₃₃ ; Journal of the European Ceramic Society; Vol. 42; No. 8; 3437-3445; 10.1016/j.jeurceramsoc.2022.02.037
Harder, Bryan J. and Good, Brian, et el. (2022) Deposition of electrically conductive zirconium monoxide via plasma spray-physical vapor deposition ; Journal of the American Ceramic Society; Vol. 105; No. 5; 3568-3580; 10.1111/jace.18309
Chari, Celia S. and Taylor, Zane W., et el. (2022) Nanoscale engineering of gold particles in 18th century Böttger lusters and glazes ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 119; No. 18; e2120753119; PMCID PMC9170166; 10.1073/pnas.2120753119
Arai, Noriaki and Faber, Katherine T. (2021) Freeze-cast honeycomb structures via gravity-enhanced convection ; Journal of the American Ceramic Society; Vol. 104; No. 9; 4309-4315; 10.1111/jace.17871
Arai, Noriaki and Stan, Tiberiu, et el. (2021) Coarsening of dendrites in solution-based freeze-cast ceramic systems ; Acta Materialia; Vol. 215; Art. No. 117039; 10.1016/j.actamat.2021.117039
Faber, Katherine T. and Casadio, Francesca, et el. (2021) Looking Back, Looking Forward: Materials Science in Art, Archaeology, and Art Conservation ; Annual Review of Materials Research; Vol. 51; 435-460; 10.1146/annurev-matsci-080819-013103
Kuo, Taijung and Rueschhoff, Lisa M., et el. (2021) Hierarchical porous SiOC via freeze casting and self-assembly of block copolymers ; Scripta Materialia; Vol. 191; 204-209; 10.1016/j.scriptamat.2020.09.042
Brodnik, N. R. and Brach, S., et el. (2021) Fracture Diodes: Directional Asymmetry of Fracture Toughness ; Physical Review Letters; Vol. 126; No. 2; Art. No. 025503; 10.1103/physrevlett.126.025503
Kuo, C. T. and Faber, K. T. (2020) Permeable carbon nanotube-reinforced silicon oxycarbide via freeze casting with enhanced mechanical stability ; Journal of the European Ceramic Society; Vol. 40; No. 6; 2470-2479; 10.1016/j.jeurceramsoc.2019.12.059
Faber, Katherine T. and Kornfield, Julia A., et el. (2020) Freeze-cast ceramic membrane for size based filtration
Sturdy, Lauren F. and Wright, Madeleine S., et el. (2020) Effects of zinc oxide filler on the curing and mechanical response of alkyd coatings ; Polymer; Vol. 191; Art. No. 122222; 10.1016/j.polymer.2020.122222
Brodnik, Neal R. and Hsueh, Chun-Jen, et el. (2020) Guiding and Trapping Cracks With Compliant Inclusions for Enhancing Toughness of Brittle Composite Materials ; Journal of Applied Mechanics; Vol. 87; No. 3; Art. No. 031018; 10.1115/1.4045682
Zeng, Xiaomei and Martinolich, Andrew J., et el. (2020) Dense garnet-type electrolyte with coarse grains for improved air stability and ionic conductivity ; Journal of Energy Storage; Vol. 27; Art. No. 101128; 10.1016/j.est.2019.101128
Brodnik, N. R. and Schmidt, J., et el. (2020) Analysis of Multi-scale Mechanical Properties of Ceramic Trusses Prepared from Preceramic Polymers ; Additive Manufacturing; Vol. 31; Art. No. 100957; 10.1016/j.addma.2019.100957
Zeng, Xiaomei and Arai, Noriaki, et el. (2019) Robust Cellular Shape-Memory Ceramics via Gradient‐Controlled Freeze Casting ; Advanced Engineering Materials; Vol. 21; No. 12; Art. No. 1900398; 10.1002/adem.201900398
Johnson, M. T. and Brodnik, N. R., et el. (2019) Obreimoff revisited: controlled heterogeneous fracture through the splitting of mica ; Mechanics of Materials; Vol. 136; Art. No. 103088; 10.1016/j.mechmat.2019.103088
Brodnik, Neal R. and Faber, Katherine T. (2019) Out-of-plane mechanical characterization of acicular mullite and aluminum titanate diesel particulate filters ; International Journal of Applied Ceramic Technology; Vol. 16; No. 3; 1173-1183; 10.1111/ijac.13161
Arai, Noriaki and Faber, Katherine T. (2019) Hierarchical porous ceramics via two-stage freeze casting of preceramic polymers ; Scripta Materialia; Vol. 162; 72-76; 10.1016/j.scriptamat.2018.10.037
Buannic, Lucienne and Naviroj, Maninpat, et el. (2019) Dense Freeze‐cast Li_7La_3Zr_2O_(12) Solid Electrolytes with Oriented Open Porosity and Contiguous Ceramic Scaffold ; Journal of the American Ceramic Society; Vol. 102; No. 3; 1021-1029; 10.1111/jace.15938
Tan, Wei Lin and Faber, Katherine T., et el. (2019) In-situ observation of evolving microstructural damage and associated effective electro-mechanical properties of PZT during bipolar electrical fatigue ; Acta Materialia; Vol. 164; 704-713; 10.1016/j.actamat.2018.10.065
Miller, S. M. and Xiao, X., et el. (2018) Freeze-Cast Alumina Pore Networks: Effects of Processing Parameters in Steady-State Solidification Regimes of Aqueous Slurries ; Journal of the European Ceramic Society; Vol. 38; No. 15; 5134-5143; 10.1016/j.jeurceramsoc.2018.07.009
Faber, Katherine T. (2018) Julia Randall Weertman (1926–2018) ; Nature Materials; Vol. 17; No. 11; 949; 10.1038/s41563-018-0195-1
Garcia Ponte, Elizabeth and Zeng, Xiaomei, et el. (2018) Freeze casting of porous zirconia through sol-gel
Miller, Sarah and Xiao, Xianghui, et el. (2018) Freeze-cast yttria-stabilized zirconia pore networks: Effects of alcohol additives ; International Journal of Applied Ceramic Technology; Vol. 15; No. 2; 296-306; 10.1111/ijac.12794
Naviroj, Maninpat and Voorhees, Peter W., et el. (2017) Suspension- and solution-based freeze casting for porous ceramics ; Journal of Materials Research; Vol. 32; No. 17; 3372-3382; 10.1557/jmr.2017.133
Liu, Zhao and Han, Kai, et el. (2017) X-ray nanotomography analysis of the microstructural evolution of LiMn_2 O_4 electrodes ; Journal of Power Sources; Vol. 360; 460-469; 10.1016/j.jpowsour.2017.06.027
Faber, Katherine T. (2017) The role of ceramic and glass science research in meeting societal challenges: Report from an NSF-sponsored workshop ; Journal of the American Ceramic Society; Vol. 100; No. 5; 1777-1803; 10.1111/jace.14881
Naviroj, Maninpat and Wang, Melody M., et el. (2017) Nucleation-controlled freeze casting of preceramic polymers for uniaxial pores in Si-based ceramics ; Scripta Materialia; Vol. 130; 32-36; 10.1016/j.scriptamat.2016.10.038
Johnson, M. T. and Keck, C. H. C., et el. (2017) Experimental Model Validation of High Aspect Ratio Through-Hole Filling by Additive-Assisted Copper Electrodeposition ; Journal of the Electrochemical Society; Vol. 164; No. 2; D48-D52; 10.1149/2.0391702jes
Childers, A. S. and Brodnik, N. R., et el. (2016) Interfacial frictional stresses and fracture toughness of biomorphic graphite/copper interfaces ; Materials Letters; Vol. 174; 106-109; 10.1016/j.matlet.2016.03.065
Faber, Katherine and Sturdy, Lauren, et el. (2016) Watching paint dry: Assessing the curing and aging of modern oil-based paints
Stolzenburg, F. and Kenesei, P., et el. (2016) The influence of calcium–magnesium–aluminosilicate deposits on internal stresses in Yb_2Si_2O_7 multilayer environmental barrier coatings ; Acta Materialia; Vol. 105; 189-198; 10.1016/j.actamat.2015.12.016
Liu, Zhao and Chen-Wiegart, Yu-chen K., et el. (2016) Three-Phase 3D Reconstruction of a LiCoO_2 Cathode via FIB-SEM Tomography ; Microscopy and Microanalysis; Vol. 22; No. 01; 140-148; 10.1017/S1431927615015640
Stolzenburg, F. and Johnson, M. T., et el. (2015) The interaction of calcium–magnesium–aluminosilicate with ytterbium silicate environmental barrier materials ; Surface and Coatings Technology; Vol. 284; 44-50; 10.1016/j.surfcoat.2015.08.069
Miller, S. M. and Xiao, X., et el. (2015) Freeze-cast alumina pore networks: Effects of freezing conditions and dispersion medium ; Journal of the European Ceramic Society; Vol. 35; No. 13; 3595-3605; 10.1016/j.jeurceramsoc.2015.05.012
Simsek, Gulsu and Colomban, Philippe, et el. (2015) On-Site Identification of Early Böttger Red Stoneware Using Portable XRF/Raman Instruments: 2, Glaze & Gilding Analysis ; Journal of the American Ceramic Society; Vol. 98; No. 10; 3006-3013; 10.1111/jace.13720
Naviroj, M. and Miller, S. M., et el. (2015) Directionally aligned macroporous SiOC via freeze casting of preceramic polymers ; Journal of the European Ceramic Society; Vol. 35; No. 8; 2225-2232; 10.1016/j.jeurceramsoc.2015.02.013
Simsek, Gulsu and Casadio, Francesca, et el. (2014) On-Site Identification of Early BÖTTGER Red Stoneware Made at Meissen Using Portable XRF: 1, Body Analysis ; Journal of the American Ceramic Society; Vol. 97; No. 9; 2745-2754; 10.1111/jace.13032
Shanti, Noah O. and Chan, Victor W. L., et el. (2014) X-ray micro-computed tomography and tortuosity calculations of percolating pore networks ; Acta Materialia; Vol. 71; 126-135; 10.1016/j.actamat.2014.03.003
Johnson, M. T. and Childers, A. S., et el. (2013) Wood-derived copper–graphite composites produced via additive-assisted electrodeposition ; Composites Science and Technology; Vol. 89; 61-68; 10.1016/j.compscitech.2013.09.010
Johnson, M. T. and Childers, A. S., et el. (2013) Thermal conductivity of wood-derived graphite and copper–graphite composites produced via electrodeposition ; Composites Part A: Applied Science and Manufacturing; Vol. 53; 182-189; 10.1016/j.compositesa.2013.06.009
Ramírez-Rico, J. and Stolzenburg, F., et el. (2013) In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite ; Scripta Materialia; Vol. 69; No. 7; 497-500; 10.1016/j.scriptamat.2013.05.032
Faber, Katherine T. (2013) Small Volumes Create Super(elastic) Effects ; Science; Vol. 341; No. 6153; 1464-1465; 10.1126/science.1245097
Hsiung, C.-H. H. and Pyzik, A. J., et el. (2013) Impact of doping on the mechanical properties of acicular mullite ; Journal of the European Ceramic Society; Vol. 33; No. 10; 1955-1965; 10.1016/j.jeurceramsoc.2013.02.006
Childers, A. S. and Johnson, M. T., et el. (2013) Modeling Macro-Sized, High Aspect Ratio Through-Hole Filling by Multi-Component Additive-Assisted Copper Electrodeposition ; Journal of the Electrochemical Society; Vol. 160; No. 12; D3093-D3102; 10.1149/2.018312jes
Faber, Katherine T. and Lara-Curzio, Edgar (2013) Emerging Opportunities in Ceramics: Reports from the 4th International Congress on Ceramics ; International Journal of Applied Ceramic Technology; Vol. 10; No. 3; 377-378; 10.1111/ijac.12089
Liu, Zhao and Cronin, J. Scott, et el. (2013) Three-dimensional morphological measurements of LiCoO_2 and LiCoO_2/Li (Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 lithium-ion battery cathodes ; Journal of Power Sources; Vol. 227; 267-274; 10.1016/j.jpowsour.2012.11.043
Chen-Wiegart, Yu-chen Karen and Liu, Zhao, et el. (2013) 3D analysis of a LiCoO_2-Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 Li-ion battery positive electrode using x-ray nano-tomography ; Electrochemistry Communications; Vol. 28; 127-130; 10.1016/j.elecom.2012.12.021
Hsiung, C.-H. H. and Pyzik, A. J., et el. (2013) Microstructure and mechanical properties of acicular mullite ; Journal of the European Ceramic Society; Vol. 33; No. 3; 503-513; 10.1016/j.jeurceramsoc.2012.09.017
Rohrer, Gregory S. and Affatigato, Mario, et el. (2012) Challenges in Ceramic Science: A Report from the Workshop on Emerging Research Areas in Ceramic Science ; Journal of the American Ceramic Society; Vol. 95; No. 12; 3699-3712; 10.1111/jace.12033
Shanti, N. O. and Bierschenk, D. M., et el. (2012) Direct lamination of solid oxide fuel cell anode support, anode, and electrolyte by sequential tape casting of thermoreversible gel slips ; Journal of Power Sources; Vol. 212; 43-46; 10.1016/j.jpowsour.2012.03.073
Shanti, N. O. and DeNolf, G. C., et el. (2012) Liquid Desiccant Solvent Extraction of Alumina-Filled Thermoreversible Gels ; Journal of the American Ceramic Society; Vol. 95; No. 2; 509-514; 10.1111/j.1551-2916.2011.04884.x
Faber, Katherine T. and Shanti, Noah O. (2012) Gelcasting of Ceramic Bodies ; ISBN 9780470553442; Ceramics and Composites Processing Methods; 199-234; 10.1002/9781118176665.ch6
Harder, Bryan J. and Ramírez-Rico, Joaquin, et el. (2011) Chemical and Mechanical Consequences of Environmental Barrier Coating Exposure to Calcium-Magnesium-Aluminosilicate ; Journal of the American Ceramic Society; Vol. 94; No. S1; S178-S185; 10.1111/j.1551-2916.2011.04448.x
Johnson, M. T. and Faber, K. T. (2011) Catalytic graphitization of three-dimensional wood-derived porous scaffolds ; Journal of Materials Research; Vol. 26; No. 1; 18-25; 10.1557/jmr.2010.88
Stolzenburg, F. and Almer, J., et el. (2011) Stresses in Ytterbium Silicate Multilayer Environmental Barrier Coatings
Chen, Z. and Sucech, S., et el. (2010) A hierarchical study of the mechanical properties of gypsum ; Journal of Materials Science; Vol. 45; No. 16; 4444-4453; 10.1007/s10853-010-4527-z
Parfen'eva, L. S. and Orlova, T. S., et el. (2010) Thermal conductivity of the pine-biocarbon-preform/copper composite ; Physics of the Solid State; Vol. 52; No. 7; 1348-1355; 10.1134/S1063783410070048
Parfen'eva, L. S. and Orlova, T. S., et el. (2010) Thermal conductivity of high-porosity biocarbon preforms of beech wood ; Physics of the Solid State; Vol. 52; No. 6; 1115-1122; 10.1134/S1063783410060028
Pappacena, K. E. and Johnson, M. T., et el. (2010) Processing of wood-derived copper–silicon carbide composites via electrodeposition ; Composites Science and Technology; Vol. 70; No. 3; 485-491; 10.1016/j.compscitech.2009.12.019
Harder, B. J. and Faber, K. T. (2010) Transformation kinetics in plasma-sprayed barium- and strontium-doped aluminosilicate (BSAS) ; Scripta Materialia; Vol. 62; No. 5; 282-285; 10.1016/j.scriptamat.2009.11.019
Pappacena, K. E. and Johnson, M. T., et el. (2010) Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition ; Composites Science and Technology; Vol. 70; No. 3; 478-484; 10.1016/j.compscitech.2009.11.011
Weyant, C. M. and Almer, J., et el. (2010) Through-thickness determination of phase composition and residual stresses in thermal barrier coatings using high-energy X-rays ; Acta Materialia; Vol. 58; No. 3; 943-951; 10.1016/j.actamat.2009.10.010
Wilkes, T.E. and Harder, B.J., et el. (2009) Load partitioning in honeycomb-like silicon carbide aluminum alloy composites ; Acta Materialia; Vol. 57; No. 20; 6234-6242; 10.1016/j.actamat.2009.08.050
Kardashev, B. K. and Orlova, T. S., et el. (2009) Young's modulus and internal friction in porous biocarbon white pine wood precursors ; Physics of the Solid State; Vol. 51; No. 12; 2463-2468; 10.1134/S1063783409120063
Pappacena, K. E. and Gentry, S. P., et el. (2009) Effect of pyrolyzation temperature on wood-derived carbon and silicon carbide ; Journal of the European Ceramic Society; Vol. 29; No. 14; 3069-3077; 10.1016/j.jeurceramsoc.2009.04.040
Smirnov, I. A. and Orlova, T. S., et el. (2009) Heat Capacity of the White Pine Biocarbon Preform and the Related Biocarbon/Copper Composite ; Physics of the Solid State; Vol. 51; No. 11; 2264-2268; 10.1134/S1063783409110110
Shanti, Noah O. and Hovis, David B., et el. (2009) Ceramic Laminates by Gelcasting ; International Journal of Applied Ceramic Technology; Vol. 6; No. 5; 593-606; 10.1111/j.1744-7402.2008.02312.x
Seitz, M. E. and Shull, K. R., et el. (2009) Acrylic Triblock Copolymer Design for Thermoreversible Gelcasting of Ceramics: Rheological and Green Body Properties ; Journal of the American Ceramic Society; Vol. 92; No. 7; 1519-1525; 10.1111/j.1551-2916.2009.03059.x
Wilkes, T. E. and Stock, S. R., et el. (2009) X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites ; Philosophical Magazine; Vol. 89; No. 17; 1373-1389; 10.1080/14786430902956457
Harder, B. J. and Almer, J. D., et el. (2009) In situ stress analysis of multilayer environmental barrier coatings ; Powder Diffraction; Vol. 24; No. 2; 94-98; 10.1154/1.3120602
Harder, B. J. and Almer, J. D., et el. (2009) Residual Stress Analysis of Multilayer Environmental Barrier Coatings ; Journal of the American Ceramic Society; Vol. 92; No. 2; 452-459; 10.1111/j.1551-2916.2008.02888.x
Parfen'eva, L. S. and Orlova, T. S., et el. (2008) Thermal conductivity of high-porosity biocarbon precursors of white pine wood ; Physics of the Solid State; Vol. 50; No. 12; 2245-2255; 10.1134/S1063783408120032
Kardashev, B. K. and Orlova, T. S., et el. (2008) Elasticity and inelasticity of the SiC/Al-13Si-9Mg biomorphic metal ceramics ; Physics of the Solid State; Vol. 50; No. 10; 1882-1887; 10.1134/S1063783408100168
Weyant, C. M. and Faber, K. T. (2008) Processing–microstructure relationships for plasma-sprayed yttrium aluminum garnet ; Surface and Coatings Technology; Vol. 202; No. 24; 6081-6089; 10.1016/j.surfcoat.2008.07.008
Wilkes, T. E. and Pastor, J. Y., et el. (2008) Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature ; Journal of Materials Research; Vol. 23; No. 6; 1732-1743; 10.1557/JMR.2008.0197
Kaul, V. S. and Faber, K. T. (2008) Nanoindentation analysis of the elastic properties of porous SiC derived from wood ; Scripta Materialia; Vol. 58; No. 10; 886-889; 10.1016/j.scriptamat.2008.01.018
Hovis, D. B. and Faber, K. T., et el. (2008) Texture and microstructural development in gelcast barium hexaferrite ; Journal of Materials Science; Vol. 43; No. 6; 1836-1843; 10.1007/s10853-007-2375-2
Faber, K. T. and Weyant, C. M., et el. (2007) Internal stresses and phase stability in multiphase environmental barrier coatings ; International Journal of Materials Research; Vol. 98; No. 12; 1188-1195; 10.3139/146.101590
Pappacena, K. E. and Faber, K. T., et el. (2007) Thermal Conductivity of Porous Silicon Carbide Derived from Wood Precursors ; Journal of the American Ceramic Society; Vol. 90; No. 9; 2855-2862; 10.1111/j.1551-2916.2007.01777.x
Seitz, Michelle E. and Burghardt, Wesley R., et el. (2007) Self-Assembly and Stress Relaxation in Acrylic Triblock Copolymer Gels ; Macromolecules; Vol. 40; No. 4; 1218-1226; 10.1021/ma061993+
Casadio, Francesca and Douglas, Janet G., et el. (2007) Noninvasive methods for the investigation of ancient Chinese jades: an integrated analytical approach ; Analytical and Bioanalytical Chemistry; Vol. 387; No. 3; 791-801; 10.1007/s00216-006-0684-y
de Arellano López, A. R. and Martínez-Fernández, J., et el. (2007) Processing, microstructure and mechanical behavior of SiC-based ceramics via naturally derived scaffolds ; ISBN 978-0-470-08052-8; Mechanical Properties and Performance Engineering Ceramics II: Engineering and Science Proceedings; 635-650; 10.1002/9780470291313.ch60
Casadio, Francesca and Xu, Jay, et el. (2007) A stone kneeling figure in the Art Institute of Chicago: new evidence from scientific investigations and archaeological finds in China ; ISBN 1904982204; Scientific Research on the Sculptural Arts of Asia; 3-11
Wilkes, T. E. and Young, M. L., et el. (2006) Composites by aluminum infiltration of porous silicon carbide derived from wood precursors ; Scripta Materialia; Vol. 55; No. 12; 1083-1086; 10.1016/j.scriptamat.2006.08.040
Kaul, V. S. and Faber, K. T., et el. (2006) Precursor selection and its role in the mechanical properties of porous SiC derived from wood ; Materials Science and Engineering A; Vol. 428; No. 1-2; 225-232; 10.1016/j.msea.2006.05.033
Weyant, C. M. and Faber, K. T., et el. (2006) Residual stress and microstructural evolution in environmental barrier coatings of tantalum oxide alloyed with aluminum oxide and lanthanum oxide ; Journal of the American Ceramic Society; Vol. 89; No. 3; 971-978; 10.1111/j.1551-2916.2005.00830.x
Weyant, C. M. and Faber, K. T., et el. (2005) Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride ; Journal of the American Ceramic Society; Vol. 88; No. 8; 2169-2176; 10.1111/j.1551-2916.2005.00396.x
Montgomery, John K. and Faber, K. T. (2005) Processing and surface flaw tolerance of alumina bilayers ; Journal of the American Ceramic Society; Vol. 88; No. 2; 287-292; 10.1111/j.1551-2916.2005.00073.x
Kaul, Vikram S. and Faber, K. T. (2005) Synthetic crossed-lamellar microstructures in oxide ceramics ; Journal of Ceramic Processing Research; Vol. 6; No. 3; 218-222
Su, Y. J. and Trice, R. W., et el. (2004) Thermal conductivity, phase stability, and oxidation resistance of Y_3Al_5O_(12) (YAG)/Y_2O_3-ZrO_2 (YSZ) thermal-barrier coatings ; Oxidation of Metals; Vol. 61; No. 3-4; 253-271; 10.1023/B:OXID.0000025334.02788.d3
Moldovan, Monica and Weyant, C. M., et el. (2004) Tantalum oxide coatings as candidate environmental barriers ; Journal of Thermal Spray Technology; Vol. 13; No. 1; 51-56; 10.1007/s11666-004-0049-z
Zhu, Dongming and Vaßen, Robert, et el. (2004) Editorial ; Journal of Thermal Spray Technology; Vol. 13; No. 1; 3; 10.1007/s11666-004-0039-1
Montgomery, John K. and Botha, Adele S., et el. (2003) A thermoreversible gelcasting technique for ceramic laminates ; Scripta Materialia; Vol. 48; No. 6; 785-789; 10.1016/S1359-6462(02)00517-1
Faber, K. and Fine, M., et el. (2003) TMS Annual Meeting: Preface ; ISBN 9780873395359; Electron Microscopy, its Role in Materials Science: the Mike Meshii Symposium; ix-x
Gaies, D. and Faber, K. T. (2002) Thermal properties of pitch-derived graphite foam ; Carbon; Vol. 40; No. 7; 1137-1140; 10.1016/S0008-6223(02)00099-4
Trice, R. W. and Su, Y. Jennifer, et el. (2002) Effect of heat treatment on phase stability, microstructure, and thermal conductivity of plasma-sprayed YSZ ; Journal of Materials Science; Vol. 37; No. 11; 2359-2365; 10.1023/A:1015310509520
Montgomery, John K. and Drzal, Peter L., et el. (2002) Thermoreversible gelcasting: A novel ceramic processing technique ; Journal of the American Ceramic Society; Vol. 85; No. 5; 1164-1168; 10.1111/j.1151-2916.2002.tb00239.x
Su, Y. J. and Bernecki, T. F., et el. (2002) In situ characterization of small-particle plasma sprayed powders ; Journal of Thermal Spray Technology; Vol. 11; No. 1; 52-61; 10.1361/105996302770348970
Trice, R. W. and Batson, C., et el. (2002) The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings ; Journal of Materials Science; Vol. 37; No. 3; 629-636; 10.1023/A:1013738112206
Anderson, Iver E. and Schwartz, Lyle H., et el. (2002) Materials education: opportunities over a lifetime. A report on the 17th Biannual Conference of National Materials Policy, College Park, Maryland, USA, May 20-21, 2002 ; Journal of Materials Education; Vol. 24; No. 4-6; 185-202
Zimmerman, M. H. and Baskin, D. M., et el. (2001) Fracture of a textured anisotropic ceramic ; Acta Materialia; Vol. 49; No. 16; 3231-3242; 10.1016/S1359-6454(01)00224-5
Su, Y. Jennifer and Wang, Hsin, et el. (2001) Thermal conductivity and phase evolution of plasma-sprayed multilayer coatings ; Journal of Materials Science; Vol. 36; No. 14; 3511-3518; 10.1023/A:1017932617123
Mawdsley, Jennifer R. and Su, Y. Jennifer, et el. (2001) Optimization of small-particle plasma-sprayed alumina coatings using designed experiments ; Materials Science and Engineering A; Vol. 308; No. 1-2; 189-199; 10.1016/S0921-5093(00)01992-4
Hovis, David B. and Faber, K. T. (2001) Textured microstructures in barium hexaferrite by magnetic field assisted gelcasting and templated grain growth ; Scripta Materialia; Vol. 44; No. 11; 2525-2529; 10.1016/S1359-6462(01)00957-5
Easley, Thomas C. and Faber, K. T., et el. (2001) Moiré interferometry analysis of fiber debonding ; Journal of Engineering Mechanics; Vol. 127; No. 6; 625-629; 10.1061/(ASCE)0733-9399(2001)127:6(625)
Torrents, Josep M. and Easley, Thomas C., et el. (2001) Evolution of impedance spectra during debonding and pullout of single steel fibers from cement ; Journal of the American Ceramic Society; Vol. 84; No. 4; 740-746; 10.1111/j.1151-2916.2001.tb00735.x
Faber, K. T. (2001) Ceramics: Microstructural Toughening (Excluding Transformation Toughening, Whisker Toughening, and Continuous Fiber Toughening) ; ISBN 0-08-043152-6; Encyclopedia of Materials: Science and Technology; 1108-1113; 10.1016/B0-08-043152-6/00206-0
Boling-Risser, Martha A. and Goretta, K. C., et el. (2000) Effect of microstructure on high-temperature compressive creep of self-reinforced hot-pressed silicon nitride ; Journal of the American Ceramic Society; Vol. 83; No. 12; 3065-3069; 10.1111/j.1151-2916.2000.tb01683.x
Trice, Rodney W. and Prine, David W., et el. (2000) Deformation mechanisms in compression-loaded, stand-alone plasma-sprayed alumina coatings ; Journal of the American Ceramic Society; Vol. 83; No. 12; 3057-3064; 10.1111/j.1151-2916.2000.tb01682.x
de Arellano López, A. Ramírez and Chiou, W. A., et el. (2000) Estudio comparativo de técnicas de preparación de muestraspara microscopía electrónica de transmisión de recubrimientos cerámicos proyectados por plasma ; Boletín de la Sociedad Española de Cerámica y Vidrio; Vol. 39; No. 6; 735-740
Trice, Rodney W. and Brewer, Luke N., et el. (2000) The dissociation of NZP (Ca_(0.5)Sr_(0.5)Zr_4P_6O_(24)) during plasma spraying during plasma spraying ; Scripta Materialia; Vol. 42; No. 9; 855-860; 10.1016/S1359-6462(00)00303-1
Trice, Rodney W. and Faber, K. T. (2000) Role of lamellae morphology on the microstructural development and mechanical properties of small-particle plasma-sprayed alumina ; Journal of the American Ceramic Society; Vol. 83; No. 4; 889-896; 10.1111/j.1151-2916.2000.tb01290.x
Montgomery, J. K. and Faber, K. T. (2000) Processing of stepped-density alumina via gelcasting and reaction bonding techniques ; Scripta Materialia; Vol. 42; No. 3; 283-287; 10.1016/S1359-6462(99)00342-5
Easley, Thomas C. and Faber, K. T., et el. (1999) Use of a crack-bridging single-fiber pullout test to study steel fiber/cementitious matrix composites ; Journal of the American Ceramic Society; Vol. 82; No. 12; 3513-3520; 10.1111/j.1151-2916.1999.tb02274.x
Trice, Rodney W. and Su, Y. Jennifer, et el. (1999) The role of NZP additions in plasma-sprayed YSZ: microstructure, thermal conductivity and phase stability effects ; Materials Science and Engineering A; Vol. 272; No. 2; 284-291; 10.1016/S0921-5093(99)00468-2
de Arellano-López, Antonio R. and Faber, K. T. (1999) Microstructural characterization of small-particle plasma spray coatings ; Journal of the American Ceramic Society; Vol. 82; No. 8; 2204-2208; 10.1111/j.1151-2916.1999.tb02063.x
Tandon, S. and Faber, K. T. (1999) Effects of loading rate on the fracture of cementitious materials ; Cement and Concrete Research; Vol. 29; No. 3; 397-406; 10.1016/S0008-8846(98)00223-3
Allen, A. J. and Fuller, E. R., Jr., et el. (1999) Anisotropic small-angle neutron scattering studies of ceramics ; ISBN 0873394550; Advanced materials for the 21st century : the 1999 Julia R. Weertman symposium; 15-25
Gonczy, S. T. and Faber, K. T. (1999) Ceraset (TM) and Blackglas (TM) mini-tow composites with carbon-coated Nicalon (TM) tows ; ISBN 1574980599; Advances in ceramic-matrix composites IV; 149-160
Tandon, S. and Faber, K. T. (1998) The influence of loading rate on crack bridging processes in Al_2O_3 ; Acta Materialia; Vol. 46; No. 10; 3547-3555; 10.1016/S1359-6454(98)00023-8
Saigal, Anil and Fuller, Edwin R., Jr., et el. (1998) Effect of interface properties on microcracking of iron titanate ; Scripta Materialia; Vol. 38; No. 9; 1449-1453; 10.1016/S1359-6462(98)00040-2
de Arellano López, A. R. and Faber, K. T. (1998) Morfología Granular y Microestructura de Recubrimientos Cerámicos de Grano Fino Proyectados Por Plasma (Spps) ; ISBN 8484977447; VI Congreso Nacional Propiedades Mecánicas de Sólidos; 234-240
Gonczy, S. T. and Oba, K., et el. (1998) Strength and stability studies on mini-tow ceramic composites made with nitrided Nextel (TM) 312 fibers and silicon oxycarbide ; ISBN 9780470375587; 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A; 147-154; 10.1002/9780470294482.ch17
de Arellano López, A. Ramirez and Chiou, W.-A., et el. (1998) Comparison of Focused Ion Beam and Conventional Techniques on TEM Specimen Preparation of Metal-Ceramic Interfaces
Baskin, Donald M. and Faber, Katherine T., et el. (1997) Forming tough, single phase laminates of Fe_2TiO_5 via magnetic-assisted gelcasting ; Journal of the Japan Institute of Metals; Vol. 61; No. 12; 1306-1310
Baskin, Donald M. and Zimmerman, Michael H., et el. (1997) Forming single-phase laminates via the gelcasting technique ; Journal of the American Ceramic Society; Vol. 80; No. 11; 2929-2932; 10.1111/j.1151-2916.1997.tb03213.x
Zimmerman, Michael H. and Faber, K. T., et el. (1997) Forming textured microstructures via the gelcasting technique ; Journal of the American Ceramic Society; Vol. 80; No. 10; 2725-2729; 10.1111/j.1151-2916.1997.tb03184.x
Faber, K. T. (1997) Ceramic composite interfaces: Properties and design ; Annual Review of Materials Science; Vol. 27; 499-524; 10.1146/annurev.matsci.27.1.499
Jin, D. S. and Husmann, A., et el. (1997) Controlled symmetry breaking in superconducting UPt_3 ; Physical Review Letters; Vol. 78; No. 9; 1775-1778; 10.1103/PhysRevLett.78.1775
Knepfler, C. A. and Faber, K. T., et el. (1997) High temperature stability and thermal expansion behavior of molybdenum-chromium M_2C carbides ; Journal of Alloys and Compounds; Vol. 248; No. 1-2; 139-142; 10.1016/S0925-8388(96)02442-5
Christensen, R. J. and Faber, K. T. (1997) Cyclic fatigue of reaction-bonded silicon nitride at elevated temperatures ; Journal of Materials Science; Vol. 32; No. 4; 949-955; 10.1023/A:1018509902025
Cazzato, Anthony and Faber, K. T. (1997) Fracture energy of glass-alumina interfaces via the bimaterial bend test ; Journal of the American Ceramic Society; Vol. 80; No. 1; 181-188; 10.1111/j.1151-2916.1997.tb02808.x
Gonczy, S. T. and Sprandel, R. C., et el. (1997) Tensile Tests of Miniature Fiber Reinforced Ceramic Composites for Screening Process-Property Relations ; ISBN 9780470375495; Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A; 729-736; 10.1002/9780470294437.ch79
Paulik, S. W. and Zimmerman, M. H., et el. (1996) Residual stress in ceramics with large thermal expansion anisotropy ; Journal of Materials Research; Vol. 11; No. 11; 2795-2803; 10.1557/JMR.1996.0354
Zimmerman, Michael H. and Faber, K. T., et el. (1996) Texture assessment of magnetically processed iron titanate ; Journal of the American Ceramic Society; Vol. 79; No. 5; 1389-1393; 10.1111/j.1151-2916.1996.tb08600.x
Day, P. S. and Skamser, D. J., et el. (1996) Damage tolerance of silicon carbide- and alumina-matrix surface composites ; Journal of the American Ceramic Society; Vol. 79; No. 4; 1117-1120; 10.1111/j.1151-2916.1996.tb08558.x
Tandon, S. and Faber, K. T. (1996) On loading rate effects in toughening processes ; Scripta Materialia; Vol. 34; No. 5; 757-762; 10.1016/1359-6462(95)00586-2
Christensen, Renee J. and Faber, K. T. (1996) Room-Temperature Cyclic Fatigue of Reaction-Bonded Silicon Nitride Using the Double Cleavage Drilled Compression Specimen ; Journal of the American Ceramic Society; Vol. 79; No. 2; 425-429; 10.1111/j.1151-2916.1996.tb08139.x
Tandon, S. and Faber, K. T., et el. (1995) Cohesive crack modeling of influence of sudden changes in loading rate on concrete fracture ; Engineering Fracture Mechanics; Vol. 52; No. 6; 987-997; 10.1016/0013-7944(95)00080-F
Steyer, Todd E. and Faber, K. T. (1995) Mechanical Behavior of Alumina Reinforced with Carbon-Coated Silicon Carbide Whiskers ; Journal of the American Ceramic Society; Vol. 78; No. 10; 2673-2679; 10.1111/j.1151-2916.1995.tb08039.x
Steyer, Todd E. and Faber, K. T., et el. (1995) Fracture strength of free‐standing chemically vapor‐deposited diamond films ; Applied Physics Letters; Vol. 66; No. 23; 3105-3107; 10.1063/1.113617
Gu, W.-H. and Faber, K. T. (1995) Tensile Behavior of Microcracking SiC-TiB_2 Composites ; Journal of the American Ceramic Society; Vol. 78; No. 6; 1507-1512; 10.1111/j.1151-2916.1995.tb08845.x
Mumm, D. R. and Faber, K. T. (1995) Interfacial debonding and sliding in brittle-matrix composites measured using an improved fiber pullout technique ; Acta Metallurgica et Materialia; Vol. 43; No. 3; 1259-1270; 10.1016/0956-7151(94)00294-R
Bažant, Zdeněk P. and Gu, Wei-Hwa, et el. (1995) Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete ; ACI Materials Journal; Vol. 92; No. 1; 3-9; 10.14359/1171
Tandon, S. and Faber, K. T., et el. (1995) Crack stability in the fracture of cementitious materials ; ISBN 1558992723; Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials; 387-396; 10.1557/PROC-370-387
Mumm, Daniel R. and Faber, K. T. (1994) Effects of Reinforcement Surface Morphology on Toughening of Brittle-Matrix Composites ; ISBN 0873392477; High Performance Composites: Commonalty of Phenomena; 181-192
Faber, K. T. and Mumm, Daniel R. (1994) Interface Design in Brittle-Brittle Systems ; ISBN 0873392477; High Performance Composites: Commonalty of Phenomena; 131-142
Paulik, Steven W. and Faber, K. T., et el. (1994) Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy ; Journal of the American Ceramic Society; Vol. 77; No. 2; 454-458; 10.1111/j.1151-2916.1994.tb07014.x
Jordan, D. W. and Faber, K. T. (1993) X-ray residual stress analysis of a ceramic thermal barrier coating undergoing thermal cycling ; Thin Solid Films; Vol. 235; No. 1-2; 137-141; 10.1016/0040-6090(93)90256-O
Cai, Hongda and Faber, K. T. (1993) Effective dilatational transformation toughening in brittle materials ; Scripta Metallurgica et Materialia; Vol. 28; No. 9; 1161-1166; 10.1016/0956-716X(93)90027-P
Mumm, Daniel R. and Faber, K. T., et el. (1993) High-Temperature Hardness of Chemically Vapor-Deposited Diamond ; Journal of the American Ceramic Society; Vol. 76; No. 1; 238-240; 10.1111/j.1151-2916.1993.tb03716.x
Cazzato, A. and Faber, K. T. (1993) Multiple Cracking and Interface Debonding in a Brittle Film on a Ductile Rod ; ISBN 0944904696; Advances in Ceramic-Matrix Composites; 329-338
Steyer, T. E. and Faber, K. T. (1993) DCB Methods for Examining Toughening in Alumina Reinforced with Carbon Coated SiC Whiskers ; ISBN 0944904696; Advances in Ceramic-Matrix Composites; 617-630
Mumm, Daniel R. and Faber, K. T. (1993) Micro-Mechanical Aspects of Fiber Debonding and Frictional Sliding in Brittle Matrix Composites ; ISBN 0944904696; Advances in Ceramic-Matrix Composites; 163-172
Tandon, S. and Faber, K. T. (1993) Fracture of Brittle and Quasi-Brittle Engineering Materials
Gu, W.-H. and Faber, K. T., et el. (1992) Microcracking and R-curve behavior in SiC-TiB_2 composites ; Acta Metallurgica et Materialia; Vol. 40; No. 11; 3121-3128; 10.1016/0956-7151(92)90475-T
Cai, Hongda and Faber, K. T., et el. (1992) Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites ; Journal of the American Ceramic Society; Vol. 75; No. 11; 3111-3117; 10.1111/j.1151-2916.1992.tb04395.x
Kilius, D. E. and Faber, K. T. (1992) Process zone formation in cement-aggregate composites ; Journal of Materials Science Letters; Vol. 11; No. 17; 1167-1169; 10.1007/BF00730273
Cai, H. and Faber, K. T. (1992) On the Use of Approximation Methods for Microcrack Shielding Problems ; Journal of Applied Mechanics; Vol. 59; No. 3; 497-501; 10.1115/1.2893751
Mumm, D. R. and Faber, K. T. (1992) Fiber Debonding and Pullout Processes in Ceramic Composites ; ISBN 9780470375174; Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials; 70-77; 10.1002/9780470313954.ch8
Guruswamy, Sivaraman and Faber, Katherine T., et el. (1992) Mechanical Behavior of Compound Semiconductors ; ISBN 0-12-752137-2; Mechanical Properties of Semiconductors; 189-230; 10.1016/S0080-8784(08)62516-8
Faber, Katherine T. and Malloy, Kevin J. (1992) Preface ; ISBN 9780127521374; Semiconductors and Semimetals; ix-x; 10.1016/s0080-8784(08)62511-9
Steyer, T. E. and Faber, K. T. (1992) Fracture Behavior of SiC Whisker-Reinforced Al_2O_3 with Modified Interfaces ; ISBN 9780470375198; Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials; 669-677; 10.1002/9780470313978.ch11
Cai, Hongda and Moran, B., et el. (1991) Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening ; Journal of the American Ceramic Society; Vol. 74; No. 7; 1695-1698; 10.1111/j.1151-2916.1991.tb07164.x
Baker, Theresa L. and Faber, K. T., et el. (1991) Ferroelastic Toughening in Bismuth Vanadate ; Journal of the American Ceramic Society; Vol. 74; No. 7; 1619-1623; 10.1111/j.1151-2916.1991.tb07148.x
Faber, K. T. and Gu, W.-H., et el. (1991) Fracture Properties on SiC Based Particulate Composites ; ISBN 0792311981; Toughening Mechanisms in Quasi-Brittle Materials; 3-17; 10.1007/978-94-011-3388-3_1
Magley, David J. and Winholtz, R. A., et el. (1990) Residual Stresses in a Two-Phase Microcracking Ceramic ; Journal of the American Ceramic Society; Vol. 73; No. 6; 1641-1644; 10.1111/j.1151-2916.1990.tb09808.x
Conner, C. L. and Faber, K. T. (1990) Segregant-enhanced fracture in magnesium oxide ; Journal of Materials Science; Vol. 25; No. 6; 2737-2742; 10.1007/BF00584873
Goettler, R. W. and Faber, K. T. (1990) Interfacial shear stresses in fiber-reinforced glasses ; Composites Science and Technology; Vol. 37; No. 1-3; 129-147; 10.1016/0266-3538(90)90096-N
Cai, H. and Gu, W.-H., et el. (1990) Microcrack Toughening in a SiC-TiB_2 Composite ; ISBN 0877627673; Proceedings of the American Society for Composites Fifth Technical Conference : composite materials in transition; 892-901
Rai, R. S. and Guruswamy, S., et el. (1989) Dislocation structures in In-doped and undoped GaAs deformed at 700-1100°C ; Philosophical Magazine A; Vol. 60; No. 3; 339-353; 10.1080/01418618908213866
Guruswamy, S. and Rai, R. S., et el. (1989) Influence of solute doping on the high-temperature deformation behavior of GaAs ; Journal of Applied Physics; Vol. 65; No. 6; 2508-2512; 10.1063/1.342797
Faber, Katherine T. and Iwagoshi, Thawi, et el. (1988) Toughening by Stress-Induced Microcracking in Two-Phase Ceramics ; Journal of the American Ceramic Society; Vol. 71; No. 9; C399-C401; 10.1111/j.1151-2916.1988.tb06419.x
Goettler, R. W. and Faber, K. T. (1988) Interfacial Shear Stresses in SiC and Al_2O_3 Fiber-Reinforced Glasses ; ISBN 9780470374801; Proceedings of the 12th Annual Conference on Composites and Advanced Ceramic Materials; 861-870; 10.1002/9780470310496.ch37
Faber, Katherine T. (1988) Toughening in ZrO_2-Based Materials ; ISBN 0198563353; Advanced Ceramics; 76-94
Faber, K. T. and Hickenbottom, Cynthia C. (1988) Segregant enhanced fracture of mechanics ; ISBN 0931837928; Interfacial structure, properties, and design : symposium held April 5-8, 1988, Reno, Nevada, U.S.A.; 475-483
Guruswamy, S. and Rai, R. S., et el. (1987) Deformation behavior of undoped and In-doped GaAs in the temperature range 700–1100 °C ; Journal of Applied Physics; Vol. 62; No. 10; 4130-4134; 10.1063/1.339129
Bowling, Gregory D. and Faber, K. T., et el. (1987) Computer Simulations of R-Curve Behavior in Microcracking Materials ; Journal of the American Ceramic Society; Vol. 70; No. 11; 849-854; 10.1111/j.1151-2916.1987.tb05639.x
Rai, R. S. and Faber, K. T., et el. (1987) TEM Studies of Dislocations in Deformed Ga_(x)In_(1-x)As Single Crystals
Shaw, M. C. and Faber, K. T. (1987) Temperature-Dependent Toughening in Whisker-Reinforced Ceramics ; ISBN 978-1-4612-9074-2; Ceramic Microstructures '86: Role of Interfaces; 929-938; 10.1007/978-1-4613-1933-7_92
Kerans, R. J. and Faber, K. T. (1987) Low Thermal Expansion Coatings for Carbon/Carbon Composites
Clarke, D. R. and Faber, K. T. (1987) Fracture of ceramics and glasses ; Journal of Physics and Chemistry of Solids; Vol. 48; No. 11; 1115-1157; 10.1016/0022-3697(87)90121-1
Guruswamy, S. and Hirth, J. P., et el. (1986) High-temperature hardness of Ga_(1−x)In_xAs ; Journal of Applied Physics; Vol. 60; No. 12; 4136-4140; 10.1063/1.337495
Faber, K. T. and Advani, S. H., et el. (1986) Frictional Stress Evaluation along the Fiber-Matrix Interface in Ceramic Matrix Composites ; Journal of the American Ceramic Society; Vol. 69; No. 9; C208-C209; 10.1111/j.1151-2916.1986.tb07480.x
Guruswamy, S. and Hirth, J. P., et el. (1986) Mechanical Properties of Ga_(1–x)In_xAs ; ISBN 0931837189; Semiconductor-on-Insulator and Thin Film Transistor Technology; 329-336; 10.1557/PROC-53-329
Godard, H. T. and Faber, K. T. (1986) Surface Energy as an Indicator of Interfacial Mechanical Response ; ISBN 0306423812; Tailoring multiphase and composite ceramics; 687-696; 10.1007/978-1-4613-2233-7_54
Johnson-Walls, D. and Drory, M. D., et el. (1985) Evaluation of Reliability of Brittle Components by Thermal Stress Testing ; Journal of the American Ceramic Society; Vol. 68; No. 7; 363-367; 10.1111/j.1151-2916.1985.tb10143.x
Evans, A. G. and Faber, K. T. (1984) Crack-Growth Resistance of Microcracking Brittle Materials ; Journal of the American Ceramic Society; Vol. 67; No. 4; 255-260; 10.1111/j.1151-2916.1984.tb18842.x
Faber, K. T. and Evans, A. G. (1984) Observations of Intergranular, Crack Deflection Toughening Mechanisms in Silicon Carbide ; ISBN 9780815510055; Fracture in Ceramic Materials: Toughening Mechanisms, Machining Damage, Shock; 99-108
Faber, K. T. (1984) Microcracking Contributions to the Toughness of ZrO_2-Based Ceramics ; ISBN 0916094642; Science and technology of zirconia II; 293-305
Evans, A. G. and Faber, K. T. (1984) On the Crack Growth Resistance of Microcracking Brittle Materials ; ISBN 9780815510055; Fracture in Ceramic Materials: Toughening Mechanisms, Machining Damage, Shock; 109-136
Faber, K. T. (1984) Toughening Mechanisms for Ceramics in Automotive Applications ; ISBN 9780470374108; Proceedings of the 12th Automotive Materials Conference; 408-439; 10.1002/9780470320211.ch12
Faber, K. T. and Evans, Anthony G. (1983) Intergranular Crack-Deflection Toughening in Silicon Carbide ; Journal of the American Ceramic Society; Vol. 66; No. 6; C94-C96; 10.1111/j.1151-2916.1983.tb10084.x
Faber, K. T. and Evans, A. G. (1983) Crack deflection processes—I. Theory ; Acta Metallurgica; Vol. 31; No. 4; 565-576; 10.1016/0001-6160(83)90046-9
Faber, K. T. and Evans, A. G. (1983) Crack deflection processes—II. Experiment ; Acta Metallurgica; Vol. 31; No. 4; 577-584; 10.1016/0001-6160(83)90047-0
Van Tendeloo, G and Faber, K. T., et el. (1983) Characterization of AIN ceramics containing long-period polytypes ; Journal of Materials Science; Vol. 18; No. 2; 525-532; 10.1007/BF00560642
Faber, K. T. and Evans, A. G., et el. (1983) A Statistical Analysis of Crack Deflection as a Toughening Mechanism in Ceramic Materials ; ISBN 0306410222; Measurements, transformations, and high-temperature fracture; 77-91
Rindone, G. E. and Faber, K. T., et el. (1982) Glass microstructure characterization by laser light scattering, small angle X-ray scattering and electron microscopy ; Journal of Non-Crystalline Solids; Vol. 49; No. 1-3; 253-262; 10.1016/0022-3093(82)90123-5
Evans, A. G. and Faber, K. T. (1981) Toughening of Ceramics by Circumferential Microcracking ; Journal of the American Ceramic Society; Vol. 64; No. 7; 394-398; 10.1111/j.1151-2916.1981.tb09877.x
Faber, K. T. and Huang, M. D., et el. (1981) Quantitative Studies of Thermal Shock Based Upon a Novel Test Technique ; Journal of the American Ceramic Society; Vol. 64; No. 5; 296-301; 10.1111/j.1151-2916.1981.tb09606.x
Faber, K. T. and Rindone, G. E. (1980) Small Angle X-ray Scattering and Transmission Electron Microscopy of Water Containing Phase Separated Soda Lime Silica Glasses ; Physics and Chemistry of Glasses; Vol. 21; No. 5; 171-177
Coppola, J. A. and Srinivasan, M., et el. (1979) High temperature properties of sintered alpha silicon carbide
Faber, K. T. and Landingham, R. L. (1977) The separation, identification and characterization of radioactive particles in topsoil ; Powder Technology; Vol. 16; No. 2; 209-216; 10.1016/0032-5910(77)87008-3