Greer, Julia

Article from CaltechAUTHORS

• Lee, Seola and Walker, Pierre J., et el. (2024) Molecular control via dynamic bonding enables material responsiveness in additively manufactured metallo-polyelectrolytes; Nature Communications; Vol. 15; No. 1; 6850; PMCID PMC11316739; 10.1038/s41467-024-50860-6
• Koch, Thomas and Zhang, Wenxin, et el. (2024) Approaching Standardization: Mechanical Material Testing of Macroscopic Two‐Photon Polymerized Specimens; Advanced Materials; 2308497; 10.1002/adma.202308497
• Deng, Weiting and Kumar, Siddhant, et el. (2024) AI‐Enabled Materials Design of Non‐Periodic 3D Architectures With Predictable Direction‐Dependent Elastic Properties; Advanced Materials; 2308149; 10.1002/adma.202308149
• Gallivan, Rebecca A. and Aitken, Zachary H., et el. (2024) Microstructure-driven mechanical and electromechanical phenomena in additively manufactured nanocrystalline zinc oxide; Nanotechnology; Vol. 35; No. 6; 065706; 10.1088/1361-6528/ad0984
• Zhong, Ding and Gao, Shiyuan, et el. (2024) Carbon-Related Quantum Emitter in Hexagonal Boron Nitride with Homogeneous Energy and 3-Fold Polarization; Nano Letters; Vol. 24; No. 4; 1106-1113; PMCID PMC10835729; 10.1021/acs.nanolett.3c03628
• Zhang, Wenxin and Li, Zhi, et el. (2023) Suppressed Size Effect in Nanopillars with Hierarchical Microstructures Enabled by Nanoscale Additive Manufacturing; Nano Letters; Vol. 23; No. 17; 8162-8170; 10.1021/acs.nanolett.3c02309
• Zhang, Haolu and Kellersztein, Israel, et el. (2023) Chemo-mechanical-microstructural coupling in the tarsus exoskeleton of the scorpion Scorpio palmatus; Acta Biomaterialia; Vol. 160; 176-186; 10.1016/j.actbio.2023.01.038
• Kagias, Matias and Lee, Seola, et el. (2023) Metasurface‐Enabled Holographic Lithography for Impact‐Absorbing Nanoarchitected Sheets; Advanced Materials; Vol. 35; No. 13; Art. No. 2209153; 10.1002/adma.202209153
• Moestopo, Widianto P. and Shaker, Sammy, et el. (2023) Knots are not for naught: Design, properties, and topology of hierarchical intertwined microarchitected materials; Science Advances; Vol. 9; No. 10; eade6725; PMCID PMC9995035; 10.1126/sciadv.ade6725
• Kim, Min-Woo and Lifson, Max L., et el. (2023) Enabling Durable Ultralow-k Capacitors with Enhanced Breakdown Strength in Density-Variant Nanolattices; Advanced Materials; Vol. 35; No. 6; Art. No. 2208409; 10.1002/adma.202208409
• Kagias, Matias and Lee, Seola, et el. (2023) Metasurface‐Enabled Holographic Lithography for Impact‐Absorbing Nano‐Architected Sheets; Advanced Materials; Art. No. 2209153; 10.1002/adma.202209153
• Zhang, Wenxin and Zhang, Xuan, et el. (2022) Deformation characteristics of solid-state benzene as a step towards understanding planetary geology; Nature Communications; Vol. 13; Art. No. 7949; PMCID PMC9792550; 10.1038/s41467-022-35647-x
• Saccone, Max A. and Gallivan, Rebecca A., et el. (2022) Additive manufacturing of micro-architected metals via hydrogel infusion; Nature; Vol. 612; No. 7941; 685-690; PMCID PMC9713131; 10.1038/s41586-022-05433-2
• Maurizi, Marco and Edwards, Bryce W., et el. (2022) Fracture resistance of 3D nano-architected lattice materials; Extreme Mechanics Letters; Vol. 56; Art. No. 101883; 10.1016/j.eml.2022.101883
• Lu, Hengyi and Shi, Wen, et el. (2022) Tailoring the Desorption Behavior of Hygroscopic Gels for Atmospheric Water Harvesting in Arid Climates; Advanced Materials; Vol. 34; No. 37; Art. No. 2205344; 10.1002/adma.202205344
• Xia, Xiaoxing and Spadaccini, Christopher M., et el. (2022) Responsive materials architected in space and time; Nature Reviews Materials; Vol. 7; No. 9; 683-701; PMCID PMC9208549; 10.1038/s41578-022-00450-z
• Narita, Kai and Saccone, Max A., et el. (2022) Additive manufacturing of 3D batteries: a perspective; Journal of Materials Research; Vol. 37; No. 9; 1535-1546; 10.1557/s43578-022-00562-w
• Chernow, Victoria F. and Ng, Ryan C., et el. (2021) Dispersion Mapping in 3-Dimensional Core–Shell Photonic Crystal Lattices Capable of Negative Refraction in the Mid-Infrared; Nano Letters; Vol. 21; No. 21; 9102-9107; 10.1021/acs.nanolett.1c02851
• Portela, Carlos M. and Edwards, Bryce W., et el. (2021) Supersonic impact resilience of nanoarchitected carbon; Nature Materials; Vol. 20; No. 11; 1491-1497; 10.1038/s41563-021-01033-z
• Gallivan, Rebecca A. and Greer, Julia R. (2021) Failure Mechanisms in Vertically Aligned Dense Nanowire Arrays; Nano Letters; Vol. 21; No. 18; 7542-7547; 10.1021/acs.nanolett.1c01944
• Yee, Daryl W. and Hetts, Steven W., et el. (2021) 3D-Printed Drug Capture Materials Based on Genomic DNA Coatings; ACS Applied Materials and Interfaces; Vol. 13; No. 35; 41424-41434; 10.1021/acsami.1c05209
• Saccone, Max A. and Greer, Julia R. (2021) Understanding and mitigating mechanical degradation in lithium–sulfur batteries: additive manufacturing of Li₂S composites and nanomechanical particle compressions; Journal of Materials Research; Vol. 36; No. 18; 3656-3666; 10.1557/s43578-021-00182-w
• Yee, Daryl W. and Greer, Julia R. (2021) Three‐dimensional chemical reactors: in situ materials synthesis to advance vat photopolymerization; Polymer International; Vol. 70; No. 7; 964-976; 10.1002/pi.6165
• Shi, Ye and Ilic, Ognjen, et el. (2021) All-day fresh water harvesting by microstructured hydrogel membranes; Nature Communications; Vol. 12; Art. No. 2797; PMCID PMC8121874; 10.1038/s41467-021-23174-0
• Tertuliano, Ottman and Edwards, Bryce W., et el. (2021) Nanofibril-mediated fracture resistance of bone; Bioinspiration and Biomimetics; Vol. 16; No. 3; Art. No. 035001; 10.1088/1748-3190/abdd9d
• Elliott, Luizetta V. and Salzman, Erika E., et el. (2021) Stimuli Responsive Shape Memory Microarchitectures; Advanced Functional Materials; Vol. 31; No. 9; Art. No. 2008380; 10.1002/adfm.202008380
• Almog, Ehud and Derkach, Vadim, et el. (2021) Thermal Stability of Thin Au Films Deposited on Salt Whiskers; Acta Materialia; Vol. 205; Art. No. 116537; 10.1016/j.actamat.2020.116537
• Narita, Kai and Citrin, Michael A., et el. (2021) 3D Architected Carbon Electrodes for Energy Storage; Advanced Energy Materials; Vol. 11; No. 5; Art. No. 2002637; 10.1002/aenm.202002637
• Yee, Daryl W. and Citrin, Michael A., et el. (2021) Hydrogel-Based Additive Manufacturing of Lithium Cobalt Oxide; Advanced Materials Technologies; Vol. 6; No. 2; Art. No. 2000791; PMCID PMC8115722; 10.1002/admt.202000791
• Zhang, H. and Gu, H., et el. (2021) Size-dependence of zirconia-based ceramics via deformation twinning; Extreme Mechanics Letters; Vol. 42; Art. No. 101124; 10.1016/j.eml.2020.101124
• Maurizi, Marco and Edwards, Bryce, et el. (2020) Energy-based approach for failure assessment of 3D architectured materials; Procedia Structural Integrity; Vol. 28; 2181-2186; 10.1016/j.prostr.2020.11.046
• Citrin, Michael A. and Yang, Heng, et el. (2020) From ion to atom to dendrite: Formation and nanomechanical behavior of electrodeposited lithium; MRS Bulletin; Vol. 45; No. 11; 891-904; 10.1557/mrs.2020.148
• Moestopo, Widianto P. and Mateos, Arturo J., et el. (2020) Pushing and Pulling on Ropes: Hierarchical Woven Materials; Advanced Science; Vol. 7; No. 20; 2001271; PMCID PMC7578876; 10.1002/advs.202001271
• Ng, Ryan C. and Garcia, Juan C., et el. (2020) Miniaturization of a-Si guided mode resonance filter arrays for near-IR multi-spectral filtering; Applied Physics Letters; Vol. 117; No. 11; Art. No. 111106; 10.1063/5.0024302
• Greer, Julia R. (2020) Julia Greer answers questions about additive manufacturing; Nature Communications; Vol. 11; Art. No. 3993; 10.1038/s41467-020-17723-2
• Giwa, Adenike M. and Aitken, Zachary H., et el. (2020) Effect of temperature on small-scale deformation of individual face-centered-cubic and body-centered-cubic phases of an Al_(0.7)CoCrFeNi high-entropy alloy; Materials and Design; Vol. 191; Art. No. 108611; 10.1016/j.matdes.2020.108611
• Vyatskikh, Andrey and Ng, Ryan C., et el. (2020) Additive Manufacturing of High-Refractive-Index, Nanoarchitected Titanium Dioxide for 3D Dielectric Photonic Crystals; Nano Letters; Vol. 20; No. 5; 3513-3520; 10.1021/acs.nanolett.0c00454
• Portela, Carlos M. and Vidyasagar, A., et el. (2020) Extreme mechanical resilience of self-assembled nanolabyrinthine materials; Proceedings of the National Academy of Sciences of the United States of America; Vol. 117; No. 11; 5686-5693; PMCID PMC7084143; 10.1073/pnas.1916817117
• Giordani, Vincent and Tozier, Dylan, et el. (2019) Rechargeable-battery chemistry based on lithium oxide growth through nitrate anion redox; Nature Chemistry; Vol. 11; No. 12; 1133-1138; 10.1038/s41557-019-0342-6
• Greer, Julia R. and Deshpande, Vikram S. (2019) Three-dimensional architected materials and structures: Design, fabrication, and mechanical behavior; MRS Bulletin; Vol. 44; No. 10; 750-757; 10.1557/mrs.2019.232
• Liu, Yejing and Wang, Hao, et el. (2019) Structural color three-dimensional printing by shrinking photonic crystals; Nature Communications; Vol. 10; Art. No. 4340; PMCID PMC6761189; 10.1038/s41467-019-12360-w
• Xia, Xiaoxing and Afshar, Arman, et el. (2019) Electrochemically Reconfigurable Architected Materials; Nature; Vol. 573; No. 7773; 205-213; 10.1038/s41586-019-1538-z
• Jetter, Justin and Gu, Hanlin, et el. (2019) Tuning crystallographic compatibility to enhance shape memory in ceramics; Physical Review Materials; Vol. 3; No. 9; 093603; 10.1103/physrevmaterials.3.093603
• Yee, Daryl W. and Lifson, Max L., et el. (2019) Additive Manufacturing of 3D-Architected Multifunctional Metal Oxides; Advanced Materials; Vol. 31; No. 33; Art. No. 1901345; PMCID PMC8063598; 10.1002/adma.201901345
• Kim, Min-Woo and Lifson, Max L., et el. (2019) Recoverable electrical breakdown strength and dielectric constant in ultra-low k nanolattice capacitors; Nano Letters; Vol. 19; No. 8; 5689-5696; 10.1021/acs.nanolett.9b02282
• Zhang, Xuan and Zhong, Lei, et el. (2019) Theoretical strength and rubber-like behaviour in micro-sized pyrolytic carbon; Nature Nanotechnology; Vol. 14; No. 8; 762-769; 10.1038/s41565-019-0486-y
• Ni, Xiaoyue and Zhang, Haolu, et el. (2019) Yield precursor dislocation avalanches in small crystals: the irreversibility transition; Physical Review Letters; Vol. 123; No. 3; Art. No. 035501; 10.1103/PhysRevLett.123.035501
• Zhang, Xuan and Vyatskikh, Andrey, et el. (2019) Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon; Proceedings of the National Academy of Sciences of the United States of America; Vol. 116; No. 14; 6665-6672; PMCID PMC6452738; 10.1073/pnas.1817309116
• Ng, Ryan C. and Garcia, Juan C., et el. (2019) Polarization-Independent, Narrowband, Near-IR Spectral Filters via Guided Mode Resonances in Ultrathin a-Si Nanopillar Arrays; ACS Photonics; Vol. 6; No. 2; 265-271; 10.1021/acsphotonics.8b01253
• Mateos, Arturo J. and Huang, Wei, et el. (2019) Discrete‐Continuum Duality of Architected Materials: Failure, Flaws, and Fracture; Advanced Functional Materials; Vol. 29; No. 5; Art. No. 1806772; 10.1002/adfm.201806772
• Shaw, Lucas A. and Sun, Frederick, et el. (2019) Computationally efficient design of directionally compliant metamaterials; Nature Communications; Vol. 10; Art. No. 291; PMCID PMC6336888; 10.1038/s41467-018-08049-1
• Luo, Shi and Greer, Julia R. (2018) Bio‐Mimicked Silica Architectures Capture Geometry, Microstructure, and Mechanical Properties of Marine Diatoms; Advanced Engineering Materials; Vol. 20; No. 9; Art. No. 1800301; 10.1002/adem.201800301
• Dou, Nicholas G. and Jagt, Robert A., et el. (2018) Ultralow Thermal Conductivity and Mechanical Resilience of Architected Nanolattices; Nano Letters; Vol. 18; No. 8; 4755-4761; 10.1021/acs.nanolett.8b01191
• Portela, Carlos M. and Greer, Julia R., et el. (2018) Impact of node geometry on the effective stiffness of non-slender three-dimensional truss lattice architectures; Extreme Mechanics Letters; Vol. 22; 138-148; 10.1016/j.eml.2018.06.004
• Vyatskikh, Andrey and Kudo, Akira, et el. (2018) Additive Manufacturing of Polymer-Derived Titania for One-Step Solar Water Purification; Materials Today Communications; Vol. 15; 288-293; 10.1016/j.mtcomm.2018.02.010
• Greer, Julia R. and Park, Jiwoong (2018) Additive Manufacturing of Nano- and Microarchitected Materials; Nano Letters; Vol. 18; No. 4; 2187-2188; 10.1021/acs.nanolett.8b00724
• Thompson, Rachel L. and Wang, Yongqiang, et el. (2018) Irradiation Enhances Strength and Deformability of Nano-Architected Metallic Glass; Advanced Engineering Materials; Vol. 20; No. 4; Art. No. 1701055; 10.1002/adem.201701055
• Li, Qiang and Xue, Sichuang, et el. (2018) High-Strength Nanotwinned Al Alloys with 9R Phase; Advanced Materials; Vol. 30; No. 11; Art. No. 1704629; 10.1002/adma.201704629
• Vyatskikh, Andrey and Delalande, Stéphane, et el. (2018) Additive manufacturing of 3D nano-architected metals; Nature Communications; Vol. 9; Art. No. 593; PMCID PMC5807385; 10.1038/s41467-018-03071-9
• Lifson, Max L. and Kim, Min-Woo, et el. (2017) Enabling Simultaneous Extreme Ultra Low-k in Stiff, Resilient, and Thermally Stable Nano-Architected Materials; Nano Letters; Vol. 17; No. 12; 7737-7743; 10.1021/acs.nanolett.7b03941
• Meza, Lucas R. and Phlipot, Gregory P., et el. (2017) Reexamining the mechanical property space of three-dimensional lattice architectures; Acta Materialia; Vol. 140; 424-432; 10.1016/j.actamat.2017.08.052
• Maggi, Alessandro and Li, Hanqing, et el. (2017) Three-Dimensional Nano-Architected Scaffolds with Tunable Stiffness for Efficient Bone Tissue Growth; Acta Biomaterialia; Vol. 63; 294-305; PMCID PMC5663471; 10.1016/j.actbio.2017.09.007
• Liontas, Rachel and Greer, Julia R. (2017) 3D nano-architected metallic glass: Size effect suppresses catastrophic failure; Acta Materialia; Vol. 133; 393-407; 10.1016/j.actamat.2017.05.019
• Sethna, James P. and Bierbaum, Matthew K., et el. (2017) Deformation of Crystals: Connections with Statistical Physics; Annual Review of Materials Research; Vol. 47; 217-246; 10.1146/annurev-matsci-070115-032036
• Maggi, Alessandro and Allen, Jessica, et el. (2017) Osteogenic cell functionality on 3-dimensional nano-scaffolds with varying stiffness; Extreme Mechanics Letters; Vol. 13; 1-9; 10.1016/j.eml.2017.01.002
• Yee, Daryl W. and Schulz, Michael D., et el. (2017) Functionalized 3D Architected Materials via Thiol-Michael Addition and Two-Photon Lithography; Advanced Materials; Vol. 29; No. 16; Art. No. 1605293; PMCID PMC5529122; 10.1002/adma.201605293
• Ni, Xiaoyue and Papanikolaou, Stefanos, et el. (2017) Probing Microplasticity in Small-Scale FCC Crystals via Dynamic Mechanical Analysis; Physical Review Letters; Vol. 118; No. 15; Art. No. 155501; 10.1103/PhysRevLett.118.155501
• Xu, Chen and Ahmad, Zeeshan, et el. (2017) Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes; Proceedings of the National Academy of Sciences of the United States of America; Vol. 114; No. 1; 57-61; PMCID PMC5224391; 10.1073/pnas.1615733114
• Chen, David Z. and An, Qi, et el. (2017) Ordering and dimensional crossovers in metallic glasses and liquids; Physical Review B; Vol. 95; No. 2; Art. No. 024103; 10.1103/PhysRevB.95.024103
• Figueiredo, Roberto B. and Sabbaghianrad, Shima, et el. (2017) Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation; Acta Materialia; Vol. 122; 322-331; 10.1016/j.actamat.2016.09.054
• Ni, Xiaoyue and Greer, Julia R., et el. (2016) Exceptional resilience of small-scale Au_(30)Cu_(25)Zn_(45) under cyclic stress-induced phase transformation; Nano Letters; Vol. 16; No. 12; 7621-7625; 10.1021/acs.nanolett.6b03555
• Tertuliano, Ottman and Greer, Julia R. (2016) The nanocomposite nature of bone drives its strength and damage resistance; Nature Materials; Vol. 15; No. 11; 1195-1202; 10.1038/nmat4719
• Liontas, Rachel and Jafary-Zadeh, Mehdi, et el. (2016) Substantial tensile ductility in sputtered Zr-Ni-Al nano-sized metallic glass; Acta Materialia; Vol. 118; 270-285; 10.1016/j.actamat.2016.07.050
• Xia, Xiaoxing and Di Leo, Claudio V., et el. (2016) In Situ Lithiation–Delithiation of Mechanically Robust Cu–Si Core–Shell Nanolattices in a Scanning Electron Microscope; ACS Energy Letters; Vol. 1; No. 3; 492-499; 10.1021/acsenergylett.6b00256
• Giwa, Adenike M. and Liaw, Peter K., et el. (2016) Microstructure and small-scale size effects in plasticity of individual phases of Al_(0.7)CoCrFeNi High Entropy alloy; Extreme Mechanics Letters; Vol. 8; 220-228; 10.1016/j.eml.2016.04.013
• Vajente, G. and Quintero, E. A., et el. (2016) An instrument to measure mechanical up-conversion phenomena in metals in the elastic regime; Review of Scientific Instruments; Vol. 87; No. 6; Art. No. 065107; 10.1063/1.4953114
• Kositski, Roman and Kovalenko, Oleg, et el. (2016) Cross-Split of Dislocations: An Athermal and Rapid Plasticity Mechanism; Scientific Reports; Vol. 6; Art. No. 25966; PMCID PMC4869067; 10.1038/srep25966
• Giordani, Vincent and Tozier, Dylan, et el. (2016) A Molten Salt Lithium-Oxygen Battery; Journal of the American Chemical Society; Vol. 138; No. 8; 2656-2663; 10.1021/jacs.5b11744
• Luo, Shi and Eisler, Carissa, et el. (2016) Suppression of surface recombination in CuInSe_2 (CIS) thin films via Trioctylphosphine Sulfide (TOP:S) surface passivation; Acta Materialia; Vol. 106; 171-181; 10.1016/j.actamat.2016.01.021
• Aitken, Zachary H. and Luo, Shi, et el. (2016) Microstructure provides insights into evolutionary design and resilience of Coscinodiscus sp. frustule; Proceedings of the National Academy of Sciences of the United States of America; Vol. 113; No. 8; 2017-2022; PMCID PMC4776537; 10.1073/pnas.1519790113
• Montemayor, L. C. and Wong, W. H., et el. (2016) Insensitivity to Flaws Leads to Damage Tolerance in Brittle Architected Meta-Materials; Scientific Reports; Vol. 6; Art. No. 20570; PMCID PMC4738344; 10.1038/srep20570
• Allen, Jessica and Ryu, Jubin, et el. (2016) Tunable Microfibers Suppress Fibrotic Encapsulation via Inhibition of TGFβ Signaling; Tissue Engineering Part A; Vol. 22; No. 1-2; 142-150; PMCID PMC5802271; 10.1089/ten.TEA.2015.0087
• Adibi, Sara and Branicio, Paulo S., et el. (2015) Surface roughness imparts tensile ductility to nanoscale metallic glasses; Extreme Mechanics Letters; Vol. 5; 88-95; 10.1016/j.eml.2015.08.004
• Uhl, Jonathan T. and Pathak, Shivesh, et el. (2015) Universal Quake Statistics: From Compressed Nanocrystals to Earthquakes; Scientific Reports; Vol. 5; Art. No. 16493; PMCID PMC4647222; 10.1038/srep16493
• Chen, David Z. and Shi, Crystal Y., et el. (2015) Fractal atomic-level percolation in metallic glasses; Science; Vol. 349; No. 6254; 1306-1310; 10.1126/science.aab1233
• Meza, Lucas R. and Zelhofer, Alex J., et el. (2015) Resilient 3D hierarchical architected metamaterials; Proceedings of the National Academy of Sciences of the United States of America; Vol. 112; No. 37; 11502-11507; PMCID PMC4577192; 10.1073/pnas.1509120112
• Chernow, V. F. and Alaeian, H., et el. (2015) Polymer lattices as mechanically tunable 3-dimensional photonic crystals operating in the infrared; Applied Physics Letters; Vol. 107; No. 10; Art. No. 101905; 10.1063/1.4930819
• Lee, Seok-Woo and Jafary-Zadeh, Mehdi, et el. (2015) Size Effect Suppresses Brittle Failure in Hollow Cu_(60)Zr_(40) Metallic Glass Nanolattices Deformed at Cryogenic Temperatures; Nano Letters; Vol. 15; No. 9; 5673-5681; 10.1021/acs.nanolett.5b01034
• Montemayor, L. C. and Greer, J. R. (2015) Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects; Journal of Applied Mechanics; Vol. 82; No. 7; Art. No. 071012; 10.1115/1.4030361
• Xu, Chen and Gallant, Betar M., et el. (2015) Three-Dimensional Au Microlattices as Positive Electrodes for Li–O_2 Batteries; ACS Nano; Vol. 9; No. 6; 5876-5883; 10.1021/acsnano.5b00443
• Gallant, Betar M. and Gu, X. Wendy, et el. (2015) Tailoring of Interfacial Mechanical Shear Strength by Surface Chemical Modification of Silicon Microwires Embedded in Nafion Membranes; ACS Nano; Vol. 9; No. 5; 5143-5153; 10.1021/acsnano.5b00468
• Maaß, R. and Wraith, M., et el. (2015) Slip statistics of dislocation avalanches under different loading modes; Physical Review E; Vol. 91; No. 4; Art. No. 042403; 10.1103/PhysRevE.91.042403
• Aitken, Zachary H. and Fan, Haidong, et el. (2015) The effect of size, orientation and alloying on the deformation of AZ31 nanopillars; Journal of the Mechanics and Physics of Solids; Vol. 76; 208-223; 10.1016/j.jmps.2014.11.014
• Chen, D. Z. and Gu, X. W., et el. (2015) Ductility and work hardening in nano-sized metallic glasses; Applied Physics Letters; Vol. 106; No. 6; Art. No. 061903; 10.1063/1.4907773
• Maaß, R. and Derlet, P. M., et el. (2015) Independence of Slip Velocities on Applied Stress in Small Crystals; Small; Vol. 11; No. 3; 341-351; 10.1002/smll.201400849
• Gu, X. Wendy and Jafary-Zadeh, Mehdi, et el. (2014) Mechanisms of Failure in Nanoscale Metallic Glass; Nano Letters; Vol. 14; No. 10; 5858-5864; 10.1021/nl5027869
• Meza, Lucas R. and Das, Satyajit, et el. (2014) Strong, lightweight, and recoverable three-dimensional ceramic nanolattices; Science; Vol. 345; No. 6202; 1322-1326; 10.1126/science.1255908
• Liontas, Rachel and Gu, X. Wendy, et el. (2014) Effects of Helium Implantation on the Tensile Properties and Microstructure of Ni₇₃P₂₇ Metallic Glass Nanostructures; Nano Letters; Vol. 14; No. 9; 5176-5183; 10.1021/nl502074d
• Landau, Peri and Guo, Qiang, et el. (2014) Deformation of as-fabricated and helium implanted 100 nm-diameter iron nano-pillars; Materials Science and Engineering A; Vol. 612; 316-325; 10.1016/j.msea.2014.06.052
• Luo, Shi and Lee, Jiun-Haw, et el. (2014) Strength, stiffness, and microstructure of Cu(In,Ga)Se_2 thin films deposited via sputtering and co-evaporation; Applied Physics Letters; Vol. 105; No. 1; Art. No. 011907; 10.1063/1.4890086
• Rys, Jan and Valdevit, Lorenzo, et el. (2014) Fabrication and Deformation of Metallic Glass Micro-Lattices; Advanced Engineering Materials; Vol. 16; No. 7; 889-896; 10.1002/adem.201300454
• Lee, Seok-Woo and Cheng, YinTong, et el. (2014) Cold-temperature deformation of nano-sized tungsten and niobium as revealed by in-situ nano-mechanical experiments; Science China Technological Sciences; Vol. 57; No. 4; 652-662; 10.1007/s11431-014-5502-8
• Greer, Julia R. (2014) Nanoframe Catalysts; Science; Vol. 343; No. 6177; 1319-1320; 10.1126/science.1251865
• Meza, Lucas R. and Greer, Julia R. (2014) Mechanical characterization of hollow ceramic nanolattices; Journal of Materials Science; Vol. 49; No. 6; 2496-2508; 10.1007/s10853-013-7945-x
• Montemayor, Lauren C. and Meza, Lucas R., et el. (2014) Design and Fabrication of Hollow Rigid Nanolattices via Two-Photon Lithography; Advanced Engineering Materials; Vol. 16; No. 2; 184-189; 10.1002/adem.201300254
• Aitken, Zachary H. and Jang, Dongchan, et el. (2014) Grain Boundary Sliding in Aluminum Nano-Bi-Crystals Deformed at Room Temperature; Small; Vol. 10; No. 1; 100-108; 10.1002/smll.201301060
• Ghassemi-Armaki, H. and Maaß, R., et el. (2014) Deformation response of ferrite and martensite in a dual-phase steel; Acta Materialia; Vol. 62; 197-211; 10.1016/j.actamat.2013.10.001
• Gu, X. Wendy and Wu, Zhaoxuan, et el. (2013) Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures; Nano Letters; Vol. 13; No. 11; 5703-5709; 10.1021/nl403453h
• Jang, Dongchan and Meza, Lucas R., et el. (2013) Fabrication and deformation of three-dimensional hollow ceramic nanostructures; Nature Materials; Vol. 12; No. 10; 893-898; 10.1038/nmat3738
• Maaß, Robert and Derlet, Peter M., et el. (2013) Small-scale plasticity: Insights into dislocation avalanche velocities; Scripta Materialia; Vol. 69; No. 8; 586-589; 10.1016/j.scriptamat.2013.07.005
• Pathak, Siddhartha and Mohan, Nisha, et el. (2013) Local Relative Density Modulates Failure and Strength in Vertically Aligned Carbon Nanotubes; ACS Nano; Vol. 7; No. 10; 8593-8604; 10.1021/nn402710j
• Chen, D. Z. and Jang, D., et el. (2013) Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent; Nano Letters; Vol. 13; No. 9; 4462-4468; 10.1021/nl402384r
• Lee, Seok-Woo and Meza, Lucas, et el. (2013) Cryogenic nanoindentation size effect in [0 0 1]-oriented face-centered cubic and body centered cubic single crystals; Applied Physics Letters; Vol. 103; No. 10; Art. No. 101906; 10.1063/1.4820585
• Greer, Julia R. (2013) Nanotwinned metals: It's all about imperfections; Nature Materials; Vol. 12; No. 8; 689-690; 10.1038/nmat3721
• Mohan, Nisha and Cheng, Justine, et el. (2013) Uniaxial Tension of a Class of Compressible Solids With Plastic Non-Normality; Journal of Applied Mechanics; Vol. 80; No. 4; Art. No. 040912; 10.1115/1.4024179
• Abadi, Parisa Pour Shahid Saeed and Hutchens, Shelby B., et el. (2013) Buckling-driven delamination of carbon nanotube forests; Applied Physics Letters; Vol. 102; No. 22; Art. No. 223103; 10.1063/1.4802080
• Kovalenko, O. and Greer, J. R., et el. (2013) Solid-state dewetting of thin iron films on sapphire substrates controlled by grain boundary diffusion; Acta Materialia; Vol. 61; No. 9; 3148-3156; 10.1016/j.actamat.2013.01.062
• Jang, Dongchan and Maaß, Robert, et el. (2013) Fatigue deformation of microsized metallic glasses; Scripta Materialia; Vol. 68; No. 10; 773-776; 10.1016/j.scriptamat.2012.12.011
• Pathak, Siddhartha and Mohan, Nisha, et el. (2013) Compressive response of vertically aligned carbon nanotube films gleaned from in situ flat-punch indentations; Journal of Materials Research; Vol. 28; No. 7; 984-997; 10.1557/jmr.2012.366
• Wu, Z. X. and Zhang, Y. W., et el. (2013) Nanostructure and surface effects on yield in Cu nanowires; Acta Materialia; Vol. 61; No. 6; 1831-1842; 10.1016/j.actamat.2012.11.053
• Jennings, Andrew T. and Weinberger, Christopher R., et el. (2013) Modeling dislocation nucleation strengths in pristine metallic nanowires under experimental conditions; Acta Materialia; Vol. 61; No. 6; 2244-2259; 10.1016/j.actamat.2012.12.044
• Lee, Seok-Woo and Jennings, Andrew T., et el. (2013) Emergence of enhanced strengths and Bauschinger effect in conformally passivated copper nanopillars as revealed by dislocation dynamics; Acta Materialia; Vol. 61; No. 6; 1872-1885; 10.1016/j.actamat.2012.12.008
• Landau, Peri and Guo, Q., et el. (2013) The Effect of He Implantation on the Tensile Properties and Microstructure of Cu/Fe Nano-Bicrystals; Advanced Functional Materials; Vol. 23; No. 10; 1281-1288; 10.1002/adfm.201201776
• Guo, Qiang and Landau, Peri, et el. (2013) Helium Implantation Effects on the Compressive Response of Cu Nanopillars; Small; Vol. 9; No. 5; 691-696; 10.1002/smll.201201614
• Lian, Jie and Lee, Seok-Woo, et el. (2013) Emergence of film-thickness- and grain-size-dependent elastic properties in nanocrystalline thin films; Scripta Materialia; Vol. 68; No. 5; 261-264; 10.1016/j.scriptamat.2012.10.031
• Tucker, Garritt J. and Aitken, Zachary H., et el. (2013) The mechanical behavior and deformation of bicrystalline nanowires; Modelling and Simulation in Materials Science and Engineering; Vol. 21; No. 1; Art. No. 015004; 10.1088/0965-0393/21/1/015004
• Gu, X. Wendy and Loynachan, Colleen N., et el. (2012) Size-Dependent Deformation of Nanocrystalline Pt Nanopillars; Nano Letters; Vol. 12; No. 12; 6385-6392; 10.1021/nl3036993
• Greer, Julia R. and Jang, Dongchan, et el. (2012) Exploring Deformation Mechanisms in Nanostructured Materials; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 64; No. 10; 1241-1252; 10.1007/s11837-012-0438-6
• Jang, Dongchan and Liao, Xiaoyan, et el. (2012) Deformation mechanisms in nanotwinned metal nanopillars; Nature Nanotechnology; Vol. 7; No. 9; 594-601; 10.1038/NNANO.2012.116
• Friedman, Nir and Jennings, Andrew T., et el. (2012) Statistics of Dislocation Slip Avalanches in Nanosized Single Crystals Show Tuned Critical Behavior Predicted by a Simple Mean Field Model; Physical Review Letters; Vol. 109; No. 9; Art. No. 095507; 10.1103/PhysRevLett.109.095507
• Needleman, A. and Hutchens, S. B., et el. (2012) Deformation of plastically compressible hardening-softening-hardening solids; Acta Mechanica Sinica; Vol. 28; No. 4; 1115-1124; 10.1007/s10409-012-0117-4
• Maaß, Robert and Meza, Lucas, et el. (2012) Ultrahigh Strength of Dislocation-Free Ni_3Al Nanocubes; Small; Vol. 8; No. 12; 1869-1875; 10.1002/smll.201102603
• Cho, Clara J. and O'Leary, Leslie, et el. (2012) In Situ Nanomechanical Measurements of Interfacial Strength in Membrane-Embedded Chemically Functionalized Si Microwires for Flexible Solar Cells; Nano Letters; Vol. 12; No. 6; 3296-3301; 10.1021/nl3014007
• Abadi, Parisa Pour Shahid Saeed and Hutchens, Shelby B., et el. (2012) Effects of morphology on the micro-compression response of carbon nanotube forests; Nanoscale; Vol. 4; No. 11; 3373-3380; 10.1039/c2nr30474k
• Kim, Ju-Young and Gu, Xun, et el. (2012) Suppression of Catastrophic Failure in Metallic Glass–Polyisoprene Nanolaminate Containing Nanopillars; Advanced Functional Materials; Vol. 22; No. 9; 1972-1980; 10.1002/adfm.201103050
• Jennings, A. T. and Gross, C., et el. (2012) Higher compressive strengths and the Bauschinger effect in conformally passivated copper nanopillars; Acta Materialia; Vol. 60; No. 8; 3444-3455; 10.1016/j.actamat.2012.03.013
• Hutchens, Shelby B. and Needleman, Alan, et el. (2012) A microstructurally motivated description of the deformation of vertically aligned carbon nanotube structures; Applied Physics Letters; Vol. 100; No. 12; Art. No. 121910; 10.1063/1.3697686
• Budiman, Arief Suriadi and Lee, Gyuhyon, et el. (2012) Plasticity of indium nanostructures as revealed by synchrotron X-ray microdiffraction; Materials Science and Engineering A; Vol. 538; 89-97; 10.1016/j.msea.2012.01.017
• Pathak, Siddhartha and Lim, Ee J., et el. (2012) Higher Recovery and Better Energy Dissipation at Faster Strain Rates in Carbon Nanotube Bundles: An in-Situ Study; ACS Nano; Vol. 6; No. 3; 2189-2197; 10.1021/nn300376j
• Guo, Qiang and Greer, Julia R. (2012) Compressive properties of interface-containing Cu–Fe nano-pillars; Scripta Materialia; Vol. 66; No. 5; 272-275; 10.1016/j.scriptamat.2011.11.008
• Hutchens, Shelby B. and Decolvenaere, Elizabeth, et el. (2012) Nanoshearing - Collective carbon nanotube micromechanics; Materials Today; Vol. 15; No. 3; 127-127; 10.1016/S1369-7021(12)70048-2
• Jérusalem, Antoine and Fernández, Ana, et el. (2012) Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions; Scripta Materialia; Vol. 66; No. 2; 93-96; 10.1016/j.scriptamat.2011.10.009
• Weinberger, Christopher R. and Jennings, Andrew T., et el. (2012) Atomistic simulations and continuum modeling of dislocation nucleation and strength in gold nanowires; Journal of the Mechanics and Physics of Solids; Vol. 60; No. 1; 84-103; 10.1016/j.jmps.2011.09.010
• Kim, Ju-Young and Jang, Dongchan, et el. (2012) Crystallographic orientation and size dependence of tension–compression asymmetry in molybdenum nano-pillars; International Journal of Plasticity; Vol. 28; No. 1; 46-52; 10.1016/j.ijplas.2011.05.015
• Kim, Ju-Young and Jang, Dongchan, et el. (2011) Nanolaminates Utilizing Size-Dependent Homogeneous Plasticity of Metallic Glasses; Advanced Functional Materials; Vol. 21; No. 23; 4550-4554; 10.1002/adfm.201101164
• Jennings, Andrew T. and Greer, Julia R. (2011) Heterogeneous dislocation nucleation from surfaces and interfaces as governing plasticity mechanism in nanoscale metals; Journal of Materials Research; Vol. 26; No. 22; 2803-2814; 10.1557/jmr.2011.338
• Schaedler, T. A. and Jacobsen, A. J., et el. (2011) Ultralight Metallic Microlattices; Science; Vol. 334; No. 6058; 962-965; 10.1126/science.1211649
• Hutchens, Shelby B. and Needleman, Alan, et el. (2011) Analysis of uniaxial compression of vertically aligned carbon nanotubes; Journal of the Mechanics and Physics of Solids; Vol. 59; No. 10; 2227-2237; 10.1016/j.jmps.2011.05.002
• Lian, Jie and Jang, Dongchan, et el. (2011) Catastrophic vs Gradual Collapse of Thin-Walled Nanocrystalline Ni Hollow Cylinders As Building Blocks of Microlattice Structures; Nano Letters; Vol. 11; No. 10; 4118-4125; 10.1021/nl202475p
• Sun, Qiaoyan and Guo, Qiang, et el. (2011) Size effects in strength and plasticity of single-crystalline titanium micropillars with prismatic slip orientation; Scripta Materialia; Vol. 65; No. 6; 473-476; 10.1016/j.scriptamat.2011.05.033
• Jennings, Andrew T. and Li, Ju, et el. (2011) Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation; Acta Materialia; Vol. 59; No. 14; 5627-5637; 10.1016/j.actamat.2011.05.038
• Greer, Julia R. and De Hosson, Jeff Th. M. (2011) Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect; Progress in Materials Science; Vol. 56; No. 6; 654-724; 10.1016/j.pmatsci.2011.01.005
• Lee, Gyuhyon and Kim, Ju-Young, et el. (2011) Plastic deformation of indium nanostructures; Materials Science and Engineering A; Vol. 528; No. 19-20; 6112-6120; 10.1016/j.msea.2011.04.065
• Valdevit, Lorenzo and Jacobsen, Alan J., et el. (2011) Protocols for the Optimal Design of Multi-Functional Cellular Structures: From Hypersonics to Micro-Architected Materials; Journal of the American Ceramic Society; Vol. 94; No. S1; S15-S34; 10.1111/j.1551-2916.2011.04599.x
• Kunz, Allison and Pathak, Siddhartha, et el. (2011) Size effects in Al nanopillars: Single crystalline vs. bicrystalline; Acta Materialia; Vol. 59; No. 11; 4416-4424; 10.1016/j.actamat.2011.03.065
• Jang, Dongchan and Gross, Cameron T., et el. (2011) Effects of size on the strength and deformation mechanism in Zr-based metallic glasses; International Journal of Plasticity; Vol. 27; No. 6; 858-867; 10.1016/j.ijplas.2010.09.010
• Huang, M. and Greer, J. R. (2011) Measuring Graphene Piezoreisistance via In-Situ Nanoindentation; ECS Transactions; Vol. 35; No. 3; 211-216; 10.1149/1.3569914
• Jang, Dongchan and Cai, Can, et el. (2011) Influence of Homogeneous Interfaces on the Strength of 500 nm Diameter Cu Nanopillars; Nano Letters; Vol. 11; No. 4; 1743-1746; 10.1021/nl2003076
• Huang, Mingyuan and Pascal, Tod A., et el. (2011) Electronic-Mechanical Coupling in Graphene from in situ Nanoindentation Experiments and Multiscale Atomistic Simulations; Nano Letters; Vol. 11; No. 3; 1241-1246; 10.1021/nl104227t
• Jang, Dongchan and Greer, Julia R. (2011) Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars; Scripta Materialia; Vol. 64; No. 1; 77-80; 10.1016/j.scriptamat.2010.09.010
• Jennings, Andrew T. and Greer, Julia R. (2011) Tensile deformation of electroplated copper nanopillars; Philosophical Magazine; Vol. 91; No. 7-9; 1108-1120; 10.1080/14786435.2010.505180
• Kaul, Anupama B. and Megerian, Krikor G., et el. (2010) In situ characterization of vertically oriented carbon nanofibers for three-dimensional nano-electro-mechanical device applications; Nanotechnology; Vol. 21; No. 31; Art. No. 315501; 10.1088/0957-4484/21/31/315501
• Hutchens, Shelby B. and Hall, Lee J., et el. (2010) In situ Mechanical Testing Reveals Periodic Buckle Nucleation and Propagation in Carbon Nanotube Bundles; Advanced Functional Materials; Vol. 20; No. 14; 2338-2346; 10.1002/adfm.201000305
• Kaul, A. B. and Khan, A. R., et el. (2010) Nano-Electro-Mechanical Switches Derived from Carbon-Based Nanomaterials; Nanoscience and Nanotechnology Letters; Vol. 2; No. 2; 163-169
• Lopez, J. J. and Greer, F., et el. (2010) Enhanced resistance of single-layer graphene to ion bombardment; Journal of Applied Physics; Vol. 107; No. 10; Art. No. 104326; 10.1063/1.3428466
• Jennings, Andrew T. and Burek, Michael J., et el. (2010) Microstructure versus Size: Mechanical Properties of Electroplated Single Crystalline Cu Nanopillars; Physical Review Letters; Vol. 104; No. 13; Art. No. 135503; 10.1103/PhysRevLett.104.135503
• Kim, Ju-Young and Jang, Dongchan, et el. (2010) Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale; Acta Materialia; Vol. 58; No. 7; 2355-2363; 10.1016/j.actamat.2009.12.022
• Jang, Dongchan and Greer, Julia R. (2010) Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses; Nature Materials; Vol. 9; No. 3; 215-219; 10.1038/nmat2622
• Lee, Gyuhyon and Kim, Ju-Young, et el. (2010) Fabrication, structure and mechanical properties of indium nanopillars; Acta Materialia; Vol. 58; No. 4; 1361-1368; 10.1016/j.actamat.2009.10.042
• Burek, Michael J. and Greer, Julia R. (2010) Fabrication and Microstructure Control of Nanoscale Mechanical Testing Specimens via Electron Beam Lithography and Electroplating; Nano Letters; Vol. 10; No. 1; 69-76; 10.1021/nl902872w
• Greer, Julia R. and Kim, Ju-Young, et el. (2009) The in-situ mechanical testing of nanoscale single-crystalline nanopillars; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 61; No. 12; 19-25; 10.1007/s11837-009-0174-8
• Kim, Ju-Young and Greer, Julia R. (2009) Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale; Acta Materialia; Vol. 57; No. 17; 5245-5253; 10.1016/j.actamat.2009.07.027
• Greer, Julia R. and Jang, Dongchan, et el. (2009) Emergence of New Mechanical Functionality in Materials via Size Reduction; Advanced Functional Materials; Vol. 19; No. 18; 2880-2886; 10.1002/adfm.200900854
• Kim, Ju-Young and Jang, Dongchan, et el. (2009) Insight into the deformation behavior of niobium single crystals under uniaxial compression and tension at the nanoscale; Scripta Materialia; Vol. 61; No. 3; 300-303; 10.1016/j.scriptamat.2009.04.012
• Lian, Jie and Wang, Junian, et el. (2009) Sample boundary effect in nanoindentation of nano and microscale surface structures; Journal of the Mechanics and Physics of Solids; Vol. 57; No. 5; 812-827; 10.1016/j.jmps.2009.01.008
• Misra, Abha and Greer, Julia R., et el. (2009) Strain rate effects in the mechanical response of polymer-anchored carbon nanotube foams; Advanced Materials; Vol. 21; No. 3; 334-338; 10.1002/adma.200801997
• Brinckmann, S. and Kim, J. -Y., et el. (2009) Effects of sample geometry on the uniaxial tensile stress state at the nanoscale; International Journal for Multiscale Computational Engineering; Vol. 7; No. 3; 187-194; 10.1615/IntJMultCompEng.v7.i3.20
• Kim, Ju-Young and Greer, Julia R. (2008) Size-dependent mechanical properties of molybdenum nanopillars; Applied Physics Letters; Vol. 93; No. 10; Art. No. 101916; 10.1063/1.2979684
• Kim, Ju-Young and Kang, Seung-Kyun, et el. (2008) Evaluating plastic flow properties by characterizing indentation size effect using a sharp indenter; Acta Materialia; Vol. 56; No. 14; 3338-3343; 10.1016/j.actamat.2008.02.049
• Brinckmann, Stefan and Kim, Ju-Young, et el. (2008) Fundamental Differences in Mechanical Behavior between Two Types of Crystals at the Nanoscale; Physical Review Letters; Vol. 100; No. 15; Art. No. 155502; 10.1103/PhysRevLett.100.155502
• Greer, Julia R. and Espinosa, Horacio, et el. (2008) Comment on "Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal" Appl. Phys. Lett. 91, 111915 (2007); Applied Physics Letters; Vol. 92; No. 9; Art. No. 096101; 10.1063/1.2889997
• Budiman, A. S. and Han, S. M., et el. (2008) A search for evidence of strain gradient hardening in Au submicron pillars under uniaxial compression using synchrotron X-ray microdiffraction; Acta Metallurgica et Materialia; Vol. 56; No. 3; 602-608; 10.1016/j.actamat.2007.10.031
• Greer, Julia R. and Weinberger, Christopher R., et el. (2007) Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: Compression experiments and dislocation dynamics simulations; Materials Science and Engineering A; Vol. 493; No. 1-2; 21-25; 10.1016/j.msea.2007.08.093
• Greer, Julia R. and Street, Robert A. (2007) Thermal cure effects on electrical performance of nanoparticle silver inks; Acta Materialia; Vol. 55; No. 18; 6345-6349; 10.1016/j.actamat.2007.07.040
• Greer, Julia R. and Street, Robert A. (2007) Mechanical characterization of solution-derived nanoparticle silver ink thin films; Journal of Applied Physics; Vol. 101; No. 10; Art. No. 103529; 10.1063/1.2735404
• Nix, William D. and Greer, Julia R., et el. (2007) Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvation; Thin Solid Films; Vol. 515; No. 6; 3152-3157; 10.1016/j.tsf.2006.01.030
• Greer, Julia R. (2006) Bridging the gap between computational and experimental length scales: A review on nanoscale plasticity; Reviews on Advanced Materials Science; Vol. 13; No. 1; 59-70
• Wang, Junlan and Lian, Jie, et el. (2006) Size effect in contact compression of nano- and microscale pyramid structures; Acta Materialia; Vol. 54; No. 15; 3973-3982; 10.1016/j.actamat.2006.04.030
• Greer, Julia R. and Nix, William D. (2006) Nanoscale gold pillars strengthened through dislocation starvation; Physical Review B; Vol. 73; No. 24; Art. No. 245410; 10.1103/PhysRevB.73.245410
• Greer, Julia R. (2006) Effective Use of Focused Ion Beam (FIB) in Investigating Fundamental Mechanical Properties of Metals at the Sub-Micron Scale; Materials Research Society symposia proceedings; Vol. 983; No. 1; 69-71; 10.1557/PROC-983-0983-LL08-03
• Greer, J. R. and Nix, W. D. (2005) Size dependence of mechanical properties of gold at the sub-micron scale; Applied Physics A: Materials Science and Processing; Vol. 80; No. 8; 1625-1629; 10.1007/s00339-005-3204-6
• Greer, Julia R. and Oliver, Warren C., et el. (2005) Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients; Acta Materialia; Vol. 53; No. 6; 1821-1830; 10.1016/j.actamat.2004.12.031