Greer, Julia
Lee, Seola and Walker, Pierre J., et el. (2024) Molecular control via dynamic bonding enables material responsiveness in additively manufactured metallo-polyelectrolytes ; Nature Communications; Vol. 15; No. 1; 6850; PMCID PMC11316739; 10.1038/s41467-024-50860-6
Koch, Thomas and Zhang, Wenxin, et el. (2024) Approaching Standardization: Mechanical Material Testing of Macroscopic Two‐Photon Polymerized Specimens ; Advanced Materials; 2308497; 10.1002/adma.202308497
Deng, Weiting and Kumar, Siddhant, et el. (2024) AI‐Enabled Materials Design of Non‐Periodic 3D Architectures With Predictable Direction‐Dependent Elastic Properties ; Advanced Materials; 2308149; 10.1002/adma.202308149
Gallivan, Rebecca A. and Aitken, Zachary H., et el. (2024) Microstructure-driven mechanical and electromechanical phenomena in additively manufactured nanocrystalline zinc oxide ; Nanotechnology; Vol. 35; No. 6; 065706; 10.1088/1361-6528/ad0984
Zhong, Ding and Gao, Shiyuan, et el. (2024) Carbon-Related Quantum Emitter in Hexagonal Boron Nitride with Homogeneous Energy and 3-Fold Polarization ; Nano Letters; Vol. 24; No. 4; 1106-1113; PMCID PMC10835729; 10.1021/acs.nanolett.3c03628
Zhang, Wenxin and Li, Zhi, et el. (2023) Suppressed Size Effect in Nanopillars with Hierarchical Microstructures Enabled by Nanoscale Additive Manufacturing ; Nano Letters; Vol. 23; No. 17; 8162-8170; 10.1021/acs.nanolett.3c02309
Zhang, Haolu and Kellersztein, Israel, et el. (2023) Chemo-mechanical-microstructural coupling in the tarsus exoskeleton of the scorpion Scorpio palmatus ; Acta Biomaterialia; Vol. 160; 176-186; 10.1016/j.actbio.2023.01.038
Kagias, Matias and Lee, Seola, et el. (2023) Metasurface‐Enabled Holographic Lithography for Impact‐Absorbing Nanoarchitected Sheets ; Advanced Materials; Vol. 35; No. 13; Art. No. 2209153; 10.1002/adma.202209153
Moestopo, Widianto P. and Shaker, Sammy, et el. (2023) Knots are not for naught: Design, properties, and topology of hierarchical intertwined microarchitected materials ; Science Advances; Vol. 9; No. 10; eade6725; PMCID PMC9995035; 10.1126/sciadv.ade6725
Kim, Min-Woo and Lifson, Max L., et el. (2023) Enabling Durable Ultralow-k Capacitors with Enhanced Breakdown Strength in Density-Variant Nanolattices ; Advanced Materials; Vol. 35; No. 6; Art. No. 2208409; 10.1002/adma.202208409
Kagias, Matias and Lee, Seola, et el. (2023) Metasurface‐Enabled Holographic Lithography for Impact‐Absorbing Nano‐Architected Sheets ; Advanced Materials; Art. No. 2209153; 10.1002/adma.202209153
Zhang, Wenxin and Zhang, Xuan, et el. (2022) Deformation characteristics of solid-state benzene as a step towards understanding planetary geology ; Nature Communications; Vol. 13; Art. No. 7949; PMCID PMC9792550; 10.1038/s41467-022-35647-x
Saccone, Max A. and Gallivan, Rebecca A., et el. (2022) Additive manufacturing of micro-architected metals via hydrogel infusion ; Nature; Vol. 612; No. 7941; 685-690; PMCID PMC9713131; 10.1038/s41586-022-05433-2
Maurizi, Marco and Edwards, Bryce W., et el. (2022) Fracture resistance of 3D nano-architected lattice materials ; Extreme Mechanics Letters; Vol. 56; Art. No. 101883; 10.1016/j.eml.2022.101883
Lu, Hengyi and Shi, Wen, et el. (2022) Tailoring the Desorption Behavior of Hygroscopic Gels for Atmospheric Water Harvesting in Arid Climates ; Advanced Materials; Vol. 34; No. 37; Art. No. 2205344; 10.1002/adma.202205344
Xia, Xiaoxing and Spadaccini, Christopher M., et el. (2022) Responsive materials architected in space and time ; Nature Reviews Materials; Vol. 7; No. 9; 683-701; PMCID PMC9208549; 10.1038/s41578-022-00450-z
Narita, Kai and Saccone, Max A., et el. (2022) Additive manufacturing of 3D batteries: a perspective ; Journal of Materials Research; Vol. 37; No. 9; 1535-1546; 10.1557/s43578-022-00562-w
Chernow, Victoria F. and Ng, Ryan C., et el. (2021) Dispersion Mapping in 3-Dimensional Core–Shell Photonic Crystal Lattices Capable of Negative Refraction in the Mid-Infrared ; Nano Letters; Vol. 21; No. 21; 9102-9107; 10.1021/acs.nanolett.1c02851
Portela, Carlos M. and Edwards, Bryce W., et el. (2021) Supersonic impact resilience of nanoarchitected carbon ; Nature Materials; Vol. 20; No. 11; 1491-1497; 10.1038/s41563-021-01033-z
Gallivan, Rebecca A. and Greer, Julia R. (2021) Failure Mechanisms in Vertically Aligned Dense Nanowire Arrays ; Nano Letters; Vol. 21; No. 18; 7542-7547; 10.1021/acs.nanolett.1c01944
Yee, Daryl W. and Hetts, Steven W., et el. (2021) 3D-Printed Drug Capture Materials Based on Genomic DNA Coatings ; ACS Applied Materials and Interfaces; Vol. 13; No. 35; 41424-41434; 10.1021/acsami.1c05209
Saccone, Max A. and Greer, Julia R. (2021) Understanding and mitigating mechanical degradation in lithium–sulfur batteries: additive manufacturing of Li₂S composites and nanomechanical particle compressions ; Journal of Materials Research; Vol. 36; No. 18; 3656-3666; 10.1557/s43578-021-00182-w
Yee, Daryl W. and Greer, Julia R. (2021) Three‐dimensional chemical reactors: in situ materials synthesis to advance vat photopolymerization ; Polymer International; Vol. 70; No. 7; 964-976; 10.1002/pi.6165
Shi, Ye and Ilic, Ognjen, et el. (2021) All-day fresh water harvesting by microstructured hydrogel membranes ; Nature Communications; Vol. 12; Art. No. 2797; PMCID PMC8121874; 10.1038/s41467-021-23174-0
Tertuliano, Ottman and Edwards, Bryce W., et el. (2021) Nanofibril-mediated fracture resistance of bone ; Bioinspiration and Biomimetics; Vol. 16; No. 3; Art. No. 035001; 10.1088/1748-3190/abdd9d
Elliott, Luizetta V. and Salzman, Erika E., et el. (2021) Stimuli Responsive Shape Memory Microarchitectures ; Advanced Functional Materials; Vol. 31; No. 9; Art. No. 2008380; 10.1002/adfm.202008380
Almog, Ehud and Derkach, Vadim, et el. (2021) Thermal Stability of Thin Au Films Deposited on Salt Whiskers ; Acta Materialia; Vol. 205; Art. No. 116537; 10.1016/j.actamat.2020.116537
Narita, Kai and Citrin, Michael A., et el. (2021) 3D Architected Carbon Electrodes for Energy Storage ; Advanced Energy Materials; Vol. 11; No. 5; Art. No. 2002637; 10.1002/aenm.202002637
Yee, Daryl W. and Citrin, Michael A., et el. (2021) Hydrogel-Based Additive Manufacturing of Lithium Cobalt Oxide ; Advanced Materials Technologies; Vol. 6; No. 2; Art. No. 2000791; PMCID PMC8115722; 10.1002/admt.202000791
Zhang, H. and Gu, H., et el. (2021) Size-dependence of zirconia-based ceramics via deformation twinning ; Extreme Mechanics Letters; Vol. 42; Art. No. 101124; 10.1016/j.eml.2020.101124
Maurizi, Marco and Edwards, Bryce, et el. (2020) Energy-based approach for failure assessment of 3D architectured materials ; Procedia Structural Integrity; Vol. 28; 2181-2186; 10.1016/j.prostr.2020.11.046
Citrin, Michael A. and Yang, Heng, et el. (2020) From ion to atom to dendrite: Formation and nanomechanical behavior of electrodeposited lithium ; MRS Bulletin; Vol. 45; No. 11; 891-904; 10.1557/mrs.2020.148
Moestopo, Widianto P. and Mateos, Arturo J., et el. (2020) Pushing and Pulling on Ropes: Hierarchical Woven Materials ; Advanced Science; Vol. 7; No. 20; 2001271; PMCID PMC7578876; 10.1002/advs.202001271
Ng, Ryan C. and Garcia, Juan C., et el. (2020) Miniaturization of a-Si guided mode resonance filter arrays for near-IR multi-spectral filtering ; Applied Physics Letters; Vol. 117; No. 11; Art. No. 111106; 10.1063/5.0024302
Greer, Julia R. (2020) Julia Greer answers questions about additive manufacturing ; Nature Communications; Vol. 11; Art. No. 3993; 10.1038/s41467-020-17723-2
Giwa, Adenike M. and Aitken, Zachary H., et el. (2020) Effect of temperature on small-scale deformation of individual face-centered-cubic and body-centered-cubic phases of an Al_(0.7)CoCrFeNi high-entropy alloy ; Materials and Design; Vol. 191; Art. No. 108611; 10.1016/j.matdes.2020.108611
Vyatskikh, Andrey and Ng, Ryan C., et el. (2020) Additive Manufacturing of High-Refractive-Index, Nanoarchitected Titanium Dioxide for 3D Dielectric Photonic Crystals ; Nano Letters; Vol. 20; No. 5; 3513-3520; 10.1021/acs.nanolett.0c00454
Schulz, Michael D. and Blumenfeld, Carl M., et el. (2020) DNA-functionalized scaffolds for drug capture applications
Portela, Carlos M. and Vidyasagar, A., et el. (2020) Extreme mechanical resilience of self-assembled nanolabyrinthine materials ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 117; No. 11; 5686-5693; PMCID PMC7084143; 10.1073/pnas.1916817117
Pearson, Phillippe and Kamali, Seyedeh Mahsa, et el. (2020) Scalable fabrication of nano-architected materials using 3D interference lithography with metasurfaces at visible wavelengths (Conference Presentation) ; ISBN 9781510633414; Photonic and Phononic Properties of Engineered Nanostructures X; Art. No. 112890I; 10.1117/12.2555112
Yee, Daryl W. and Greer, Julia R. (2020) Additive manufacturing of functional materials via photopolymer complex synthesis
Yee, Daryl W. and Taylor, Zane W., et el. (2020) 3D printable polyelectrolyte complexes with versatile mechanical, responsive, and self-healing properties
Yee, Daryl W. and Grubbs, Robert Howard, et el. (2020) Genomic DNA coated 3D printed devices for chemotherapy
Chen, Amylynn and Greer, Julia R., et el. (2020) 3D printing of recyclable dynamic covalent boronate ester-based polymers
Learsch, Robert and Greer, Julia R. (2020) Durable, low-voltage electroactive polymers formed from polyionic complexes
Giordani, Vincent and Tozier, Dylan, et el. (2019) Rechargeable-battery chemistry based on lithium oxide growth through nitrate anion redox ; Nature Chemistry; Vol. 11; No. 12; 1133-1138; 10.1038/s41557-019-0342-6
Portela, Carlos and Edwards, Bryce, et el. (2019) Supersonic Impact on Carbon Nano-architected Materials
Greer, Julia R. and Deshpande, Vikram S. (2019) Three-dimensional architected materials and structures: Design, fabrication, and mechanical behavior ; MRS Bulletin; Vol. 44; No. 10; 750-757; 10.1557/mrs.2019.232
Liu, Yejing and Wang, Hao, et el. (2019) Structural color three-dimensional printing by shrinking photonic crystals ; Nature Communications; Vol. 10; Art. No. 4340; PMCID PMC6761189; 10.1038/s41467-019-12360-w
Xia, Xiaoxing and Afshar, Arman, et el. (2019) Electrochemically Reconfigurable Architected Materials ; Nature; Vol. 573; No. 7773; 205-213; 10.1038/s41586-019-1538-z
Jetter, Justin and Gu, Hanlin, et el. (2019) Tuning crystallographic compatibility to enhance shape memory in ceramics ; Physical Review Materials; Vol. 3; No. 9; 093603; 10.1103/physrevmaterials.3.093603
Yee, Daryl W. and Lifson, Max L., et el. (2019) Additive Manufacturing of 3D-Architected Multifunctional Metal Oxides ; Advanced Materials; Vol. 31; No. 33; Art. No. 1901345; PMCID PMC8063598; 10.1002/adma.201901345
Kim, Min-Woo and Lifson, Max L., et el. (2019) Recoverable electrical breakdown strength and dielectric constant in ultra-low k nanolattice capacitors ; Nano Letters; Vol. 19; No. 8; 5689-5696; 10.1021/acs.nanolett.9b02282
Zhang, Xuan and Zhong, Lei, et el. (2019) Theoretical strength and rubber-like behaviour in micro-sized pyrolytic carbon ; Nature Nanotechnology; Vol. 14; No. 8; 762-769; 10.1038/s41565-019-0486-y
Ni, Xiaoyue and Zhang, Haolu, et el. (2019) Yield precursor dislocation avalanches in small crystals: the irreversibility transition ; Physical Review Letters; Vol. 123; No. 3; Art. No. 035501; 10.1103/PhysRevLett.123.035501
Zhang, Xuan and Vyatskikh, Andrey, et el. (2019) Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 116; No. 14; 6665-6672; PMCID PMC6452738; 10.1073/pnas.1817309116
Yee, Daryl and Krishnamoorthy, Sankarganesh, et el. (2019) Genomic DNA functionalized 3D printed architected materials for drug capture
Yee, Daryl W. and Lifson, Max L., et el. (2019) 3D printing of multifunctional metal oxides via a novel photopolymer system
Luizetta, Navrazhnykh and Greer, Julia (2019) Stimuli responsive microscale architectures: Two-photon lithography with shape memory polymers
Vyatskikh, Andrey and Ng, Ryan C., et el. (2019) Additive manufacturing of titanium dioxide for dielectric photonic crystals ; 10.1117/12.2507076
Ng, Ryan C. and Garcia, Juan C., et el. (2019) Polarization-Independent, Narrowband, Near-IR Spectral Filters via Guided Mode Resonances in Ultrathin a-Si Nanopillar Arrays ; ACS Photonics; Vol. 6; No. 2; 265-271; 10.1021/acsphotonics.8b01253
Greer, Julia R. and Jackson, Jennifer M., et el. (2019) Future Missions to Titan: Scientific and Engineering Challenges ; 10.26206/5VKW-9021
Mateos, Arturo J. and Huang, Wei, et el. (2019) Discrete‐Continuum Duality of Architected Materials: Failure, Flaws, and Fracture ; Advanced Functional Materials; Vol. 29; No. 5; Art. No. 1806772; 10.1002/adfm.201806772
Shaw, Lucas A. and Sun, Frederick, et el. (2019) Computationally efficient design of directionally compliant metamaterials ; Nature Communications; Vol. 10; Art. No. 291; PMCID PMC6336888; 10.1038/s41467-018-08049-1
Luo, Shi and Greer, Julia R. (2018) Bio‐Mimicked Silica Architectures Capture Geometry, Microstructure, and Mechanical Properties of Marine Diatoms ; Advanced Engineering Materials; Vol. 20; No. 9; Art. No. 1800301; 10.1002/adem.201800301
Dou, Nicholas G. and Jagt, Robert A., et el. (2018) Ultralow Thermal Conductivity and Mechanical Resilience of Architected Nanolattices ; Nano Letters; Vol. 18; No. 8; 4755-4761; 10.1021/acs.nanolett.8b01191
Portela, Carlos M. and Greer, Julia R., et el. (2018) Impact of node geometry on the effective stiffness of non-slender three-dimensional truss lattice architectures ; Extreme Mechanics Letters; Vol. 22; 138-148; 10.1016/j.eml.2018.06.004
Vyatskikh, Andrey and Kudo, Akira, et el. (2018) Additive Manufacturing of Polymer-Derived Titania for One-Step Solar Water Purification ; Materials Today Communications; Vol. 15; 288-293; 10.1016/j.mtcomm.2018.02.010
Greer, Julia R. and Park, Jiwoong (2018) Additive Manufacturing of Nano- and Microarchitected Materials ; Nano Letters; Vol. 18; No. 4; 2187-2188; 10.1021/acs.nanolett.8b00724
Thompson, Rachel L. and Wang, Yongqiang, et el. (2018) Irradiation Enhances Strength and Deformability of Nano-Architected Metallic Glass ; Advanced Engineering Materials; Vol. 20; No. 4; Art. No. 1701055; 10.1002/adem.201701055
Li, Qiang and Xue, Sichuang, et el. (2018) High-Strength Nanotwinned Al Alloys with 9R Phase ; Advanced Materials; Vol. 30; No. 11; Art. No. 1704629; 10.1002/adma.201704629
Chernow, Victoria F. and Ng, Ryan C., et el. (2018) Fabrication and characterization of a three-dimensional core-shell photonic-crystal lattice capable of negative refraction in the mid-infrared (Conference Presentation) ; ISBN 9781510615670; Photonic and Phononic Properties of Engineered Nanostructures VIII; Art. No. 105410N; 10.1117/12.2290697
Yee, Daryl and Schulz, Michael, et el. (2018) Genomic DNA functionalized 3D printed materials for drug capture
Ng, Ryan C. and Greer, Julia R., et el. (2018) Fabrication of ultra-thin si nanopillar arrays for polarization-independent spectral filters in the near-IR ; ISBN 9781510615670; Photonic and Phononic Properties of Engineered Nanostructures VIII; Art. No. 105411D; 10.1117/12.2286804
Vyatskikh, Andrey and Delalande, Stéphane, et el. (2018) Additive manufacturing of 3D nano-architected metals ; Nature Communications; Vol. 9; Art. No. 593; PMCID PMC5807385; 10.1038/s41467-018-03071-9
Lifson, Max L. and Kim, Min-Woo, et el. (2017) Enabling Simultaneous Extreme Ultra Low-k in Stiff, Resilient, and Thermally Stable Nano-Architected Materials ; Nano Letters; Vol. 17; No. 12; 7737-7743; 10.1021/acs.nanolett.7b03941
Meza, Lucas R. and Phlipot, Gregory P., et el. (2017) Reexamining the mechanical property space of three-dimensional lattice architectures ; Acta Materialia; Vol. 140; 424-432; 10.1016/j.actamat.2017.08.052
Maggi, Alessandro and Li, Hanqing, et el. (2017) Three-Dimensional Nano-Architected Scaffolds with Tunable Stiffness for Efficient Bone Tissue Growth ; Acta Biomaterialia; Vol. 63; 294-305; PMCID PMC5663471; 10.1016/j.actbio.2017.09.007
Schulz, Michael and Blumenfeld, Carl, et el. (2017) Materials for drug capture: An approach for removing off-target chemotherapy from the bloodstream
Liontas, Rachel and Greer, Julia R. (2017) 3D nano-architected metallic glass: Size effect suppresses catastrophic failure ; Acta Materialia; Vol. 133; 393-407; 10.1016/j.actamat.2017.05.019
Sethna, James P. and Bierbaum, Matthew K., et el. (2017) Deformation of Crystals: Connections with Statistical Physics ; Annual Review of Materials Research; Vol. 47; 217-246; 10.1146/annurev-matsci-070115-032036
Maggi, Alessandro and Allen, Jessica, et el. (2017) Osteogenic cell functionality on 3-dimensional nano-scaffolds with varying stiffness ; Extreme Mechanics Letters; Vol. 13; 1-9; 10.1016/j.eml.2017.01.002
Yee, Daryl W. and Schulz, Michael D., et el. (2017) Functionalized 3D Architected Materials via Thiol-Michael Addition and Two-Photon Lithography ; Advanced Materials; Vol. 29; No. 16; Art. No. 1605293; PMCID PMC5529122; 10.1002/adma.201605293
Ni, Xiaoyue and Papanikolaou, Stefanos, et el. (2017) Probing Microplasticity in Small-Scale FCC Crystals via Dynamic Mechanical Analysis ; Physical Review Letters; Vol. 118; No. 15; Art. No. 155501; 10.1103/PhysRevLett.118.155501
Maani, Nazanin and Yee, Daryl, et el. (2017) Computational modeling in design of endovascular Chemofilter device for removing toxins from blood ; ISBN 978-1-5090-6358-1; 2017 IEEE Great Lakes Biomedical Conference (GLBC); 10.1109/GLBC.2017.7928894
Yee, Daryl and Schulz, Michael D., et el. (2017) Genomic DNA functionalized architected materials fabricated via two-photon lithography for drug capture
Chernow, Victoria F. and Ng, Ryan C., et el. (2017) Designing core-shell 3D photonic crystal lattices for negative refraction ; ISBN 9781510606654; Photonic and Phononic Properties of Engineered Nanostructures VII; Art. No. 101120G; 10.1117/12.2251545
Ng, Ryan C. and Mandal, Rajib, et el. (2017) Light-emitting nanolattices with enhanced brightness ; ISBN 978-1-5106-0689-0; Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XXI; Art. No. 101241E; 10.1117/12.2250081
Xu, Chen and Ahmad, Zeeshan, et el. (2017) Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 114; No. 1; 57-61; PMCID PMC5224391; 10.1073/pnas.1615733114
Chen, David Z. and An, Qi, et el. (2017) Ordering and dimensional crossovers in metallic glasses and liquids ; Physical Review B; Vol. 95; No. 2; Art. No. 024103; 10.1103/PhysRevB.95.024103
Figueiredo, Roberto B. and Sabbaghianrad, Shima, et el. (2017) Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation ; Acta Materialia; Vol. 122; 322-331; 10.1016/j.actamat.2016.09.054
Ni, Xiaoyue and Greer, Julia R., et el. (2016) Exceptional resilience of small-scale Au_(30)Cu_(25)Zn_(45) under cyclic stress-induced phase transformation ; Nano Letters; Vol. 16; No. 12; 7621-7625; 10.1021/acs.nanolett.6b03555
Tertuliano, Ottman and Greer, Julia R. (2016) The nanocomposite nature of bone drives its strength and damage resistance ; Nature Materials; Vol. 15; No. 11; 1195-1202; 10.1038/nmat4719
Liontas, Rachel and Jafary-Zadeh, Mehdi, et el. (2016) Substantial tensile ductility in sputtered Zr-Ni-Al nano-sized metallic glass ; Acta Materialia; Vol. 118; 270-285; 10.1016/j.actamat.2016.07.050
Xia, Xiaoxing and Di Leo, Claudio V., et el. (2016) In Situ Lithiation–Delithiation of Mechanically Robust Cu–Si Core–Shell Nanolattices in a Scanning Electron Microscope ; ACS Energy Letters; Vol. 1; No. 3; 492-499; 10.1021/acsenergylett.6b00256
Giwa, Adenike M. and Liaw, Peter K., et el. (2016) Microstructure and small-scale size effects in plasticity of individual phases of Al_(0.7)CoCrFeNi High Entropy alloy ; Extreme Mechanics Letters; Vol. 8; 220-228; 10.1016/j.eml.2016.04.013
Chen, David Z. and An, Qi, et el. (2016) Percolation structure in metallic glasses and liquids ; 10.48550/arXiv.1601.02057
Vajente, G. and Quintero, E. A., et el. (2016) An instrument to measure mechanical up-conversion phenomena in metals in the elastic regime ; Review of Scientific Instruments; Vol. 87; No. 6; Art. No. 065107; 10.1063/1.4953114
Kositski, Roman and Kovalenko, Oleg, et el. (2016) Cross-Split of Dislocations: An Athermal and Rapid Plasticity Mechanism ; Scientific Reports; Vol. 6; Art. No. 25966; PMCID PMC4869067; 10.1038/srep25966
Giordani, Vincent and Tozier, Dylan, et el. (2016) A Molten Salt Lithium-Oxygen Battery ; Journal of the American Chemical Society; Vol. 138; No. 8; 2656-2663; 10.1021/jacs.5b11744
Chen, D. and Shi, C., et el. (2016) Fractal arrangement of atomic structures in metallic glasses
Luo, Shi and Eisler, Carissa, et el. (2016) Suppression of surface recombination in CuInSe_2 (CIS) thin films via Trioctylphosphine Sulfide (TOP:S) surface passivation ; Acta Materialia; Vol. 106; 171-181; 10.1016/j.actamat.2016.01.021
Aitken, Zachary H. and Luo, Shi, et el. (2016) Microstructure provides insights into evolutionary design and resilience of Coscinodiscus sp. frustule ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 113; No. 8; 2017-2022; PMCID PMC4776537; 10.1073/pnas.1519790113
Montemayor, L. C. and Wong, W. H., et el. (2016) Insensitivity to Flaws Leads to Damage Tolerance in Brittle Architected Meta-Materials ; Scientific Reports; Vol. 6; Art. No. 20570; PMCID PMC4738344; 10.1038/srep20570
Allen, Jessica and Ryu, Jubin, et el. (2016) Tunable Microfibers Suppress Fibrotic Encapsulation via Inhibition of TGFβ Signaling ; Tissue Engineering Part A; Vol. 22; No. 1-2; 142-150; PMCID PMC5802271; 10.1089/ten.TEA.2015.0087
Greer, Julia R. (2016) Size-Dependent Plasticity of Single Crystalline Metallic Nanostructures ; ISBN 978-94-017-9779-5; Encyclopedia of Nanotechnology; 3713-3719; 10.1007/978-94-017-9780-1
Adibi, Sara and Branicio, Paulo S., et el. (2015) Surface roughness imparts tensile ductility to nanoscale metallic glasses ; Extreme Mechanics Letters; Vol. 5; 88-95; 10.1016/j.eml.2015.08.004
Uhl, Jonathan T. and Pathak, Shivesh, et el. (2015) Universal Quake Statistics: From Compressed Nanocrystals to Earthquakes ; Scientific Reports; Vol. 5; Art. No. 16493; PMCID PMC4647222; 10.1038/srep16493
Chen, David Z. and Shi, Crystal Y., et el. (2015) Fractal atomic-level percolation in metallic glasses ; Science; Vol. 349; No. 6254; 1306-1310; 10.1126/science.aab1233
Meza, Lucas R. and Zelhofer, Alex J., et el. (2015) Resilient 3D hierarchical architected metamaterials ; Proceedings of the National Academy of Sciences of the United States of America; Vol. 112; No. 37; 11502-11507; PMCID PMC4577192; 10.1073/pnas.1509120112
Chernow, V. F. and Alaeian, H., et el. (2015) Polymer lattices as mechanically tunable 3-dimensional photonic crystals operating in the infrared ; Applied Physics Letters; Vol. 107; No. 10; Art. No. 101905; 10.1063/1.4930819
Lee, Seok-Woo and Jafary-Zadeh, Mehdi, et el. (2015) Size Effect Suppresses Brittle Failure in Hollow Cu_(60)Zr_(40) Metallic Glass Nanolattices Deformed at Cryogenic Temperatures ; Nano Letters; Vol. 15; No. 9; 5673-5681; 10.1021/acs.nanolett.5b01034
Montemayor, L. C. and Greer, J. R. (2015) Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects ; Journal of Applied Mechanics; Vol. 82; No. 7; Art. No. 071012; 10.1115/1.4030361
Xu, Chen and Gallant, Betar M., et el. (2015) Three-Dimensional Au Microlattices as Positive Electrodes for Li–O_2 Batteries ; ACS Nano; Vol. 9; No. 6; 5876-5883; 10.1021/acsnano.5b00443
Gallant, Betar M. and Gu, X. Wendy, et el. (2015) Tailoring of Interfacial Mechanical Shear Strength by Surface Chemical Modification of Silicon Microwires Embedded in Nafion Membranes ; ACS Nano; Vol. 9; No. 5; 5143-5153; 10.1021/acsnano.5b00468
Maaß, R. and Wraith, M., et el. (2015) Slip statistics of dislocation avalanches under different loading modes ; Physical Review E; Vol. 91; No. 4; Art. No. 042403; 10.1103/PhysRevE.91.042403
Dabiri, John O. and Greer, Julia R., et el. (2015) A new approach to wind energy: Opportunities and challenges ; ISBN 9780735412941; Physics of Sustainable Energy III (PSE III); 51-57; 10.1063/1.4916168
Aitken, Zachary H. and Fan, Haidong, et el. (2015) The effect of size, orientation and alloying on the deformation of AZ31 nanopillars ; Journal of the Mechanics and Physics of Solids; Vol. 76; 208-223; 10.1016/j.jmps.2014.11.014
Chen, D. Z. and Gu, X. W., et el. (2015) Ductility and work hardening in nano-sized metallic glasses ; Applied Physics Letters; Vol. 106; No. 6; Art. No. 061903; 10.1063/1.4907773
Lee, Seok-Woo and Greer, Julia R. (2015) Size Effects in Nanomaterials and Their Use in Creating Architectured Structural Metamaterials ; ISBN 9783527679195; The Nano‐Micro Interface: Bridging the Micro and Nano Worlds; 583-598; 10.1002/9783527679195.ch28
Maaß, R. and Derlet, P. M., et el. (2015) Independence of Slip Velocities on Applied Stress in Small Crystals ; Small; Vol. 11; No. 3; 341-351; 10.1002/smll.201400849
Gu, X. Wendy and Jafary-Zadeh, Mehdi, et el. (2014) Mechanisms of Failure in Nanoscale Metallic Glass ; Nano Letters; Vol. 14; No. 10; 5858-5864; 10.1021/nl5027869
Meza, Lucas R. and Das, Satyajit, et el. (2014) Strong, lightweight, and recoverable three-dimensional ceramic nanolattices ; Science; Vol. 345; No. 6202; 1322-1326; 10.1126/science.1255908
Liontas, Rachel and Gu, X. Wendy, et el. (2014) Effects of Helium Implantation on the Tensile Properties and Microstructure of Ni₇₃P₂₇ Metallic Glass Nanostructures ; Nano Letters; Vol. 14; No. 9; 5176-5183; 10.1021/nl502074d
Landau, Peri and Guo, Qiang, et el. (2014) Deformation of as-fabricated and helium implanted 100 nm-diameter iron nano-pillars ; Materials Science and Engineering A; Vol. 612; 316-325; 10.1016/j.msea.2014.06.052
Greer, Julia R. (2014) Hierarchical 3D nano-architectures for biomimetics, batteries, and lightweight structural materials
Luo, Shi and Lee, Jiun-Haw, et el. (2014) Strength, stiffness, and microstructure of Cu(In,Ga)Se_2 thin films deposited via sputtering and co-evaporation ; Applied Physics Letters; Vol. 105; No. 1; Art. No. 011907; 10.1063/1.4890086
Rys, Jan and Valdevit, Lorenzo, et el. (2014) Fabrication and Deformation of Metallic Glass Micro-Lattices ; Advanced Engineering Materials; Vol. 16; No. 7; 889-896; 10.1002/adem.201300454
Lee, Seok-Woo and Cheng, YinTong, et el. (2014) Cold-temperature deformation of nano-sized tungsten and niobium as revealed by in-situ nano-mechanical experiments ; Science China Technological Sciences; Vol. 57; No. 4; 652-662; 10.1007/s11431-014-5502-8
Greer, Julia R. (2014) Nanoframe Catalysts ; Science; Vol. 343; No. 6177; 1319-1320; 10.1126/science.1251865
Greer, Julia R. and Liontas, Rachel, et el. (2014) Effects of helium implantation on tensile properties and microstructure of amorphous nickel phosphorous metallic glasses
Meza, Lucas R. and Greer, Julia R. (2014) Mechanical characterization of hollow ceramic nanolattices ; Journal of Materials Science; Vol. 49; No. 6; 2496-2508; 10.1007/s10853-013-7945-x
Montemayor, Lauren C. and Meza, Lucas R., et el. (2014) Design and Fabrication of Hollow Rigid Nanolattices via Two-Photon Lithography ; Advanced Engineering Materials; Vol. 16; No. 2; 184-189; 10.1002/adem.201300254
Aitken, Zachary H. and Jang, Dongchan, et el. (2014) Grain Boundary Sliding in Aluminum Nano-Bi-Crystals Deformed at Room Temperature ; Small; Vol. 10; No. 1; 100-108; 10.1002/smll.201301060
Ghassemi-Armaki, H. and Maaß, R., et el. (2014) Deformation response of ferrite and martensite in a dual-phase steel ; Acta Materialia; Vol. 62; 197-211; 10.1016/j.actamat.2013.10.001
Gu, X. Wendy and Wu, Zhaoxuan, et el. (2013) Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures ; Nano Letters; Vol. 13; No. 11; 5703-5709; 10.1021/nl403453h
Pathak, Siddhartha and Mohan, Nisha, et el. (2013) Local Relative Density Modulates Failure and Strength in Vertically Aligned Carbon Nanotubes ; ACS Nano; Vol. 7; No. 10; 8593-8604; 10.1021/nn402710j
Maaß, Robert and Derlet, Peter M., et el. (2013) Small-scale plasticity: Insights into dislocation avalanche velocities ; Scripta Materialia; Vol. 69; No. 8; 586-589; 10.1016/j.scriptamat.2013.07.005
Jang, Dongchan and Meza, Lucas R., et el. (2013) Fabrication and deformation of three-dimensional hollow ceramic nanostructures ; Nature Materials; Vol. 12; No. 10; 893-898; 10.1038/nmat3738
Chen, D. Z. and Jang, D., et el. (2013) Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent ; Nano Letters; Vol. 13; No. 9; 4462-4468; 10.1021/nl402384r
Lee, Seok-Woo and Meza, Lucas, et el. (2013) Cryogenic nanoindentation size effect in [0 0 1]-oriented face-centered cubic and body centered cubic single crystals ; Applied Physics Letters; Vol. 103; No. 10; Art. No. 101906; 10.1063/1.4820585
Greer, Julia (2013) Mechanics and physics of nano solids in designing 3D hierarchical meta materials
Greer, Julia R. (2013) Nanotwinned metals: It's all about imperfections ; Nature Materials; Vol. 12; No. 8; 689-690; 10.1038/nmat3721
Gu, X. Wendy and Wu, Zhaoxuan, et el. (2013) Flaw-driven Failure in Nanostructures ; 10.48550/arXiv.1307.3182
Mohan, Nisha and Cheng, Justine, et el. (2013) Uniaxial Tension of a Class of Compressible Solids With Plastic Non-Normality ; Journal of Applied Mechanics; Vol. 80; No. 4; Art. No. 040912; 10.1115/1.4024179
Abadi, Parisa Pour Shahid Saeed and Hutchens, Shelby B., et el. (2013) Buckling-driven delamination of carbon nanotube forests ; Applied Physics Letters; Vol. 102; No. 22; Art. No. 223103; 10.1063/1.4802080
Jang, Dongchan and Maaß, Robert, et el. (2013) Fatigue deformation of microsized metallic glasses ; Scripta Materialia; Vol. 68; No. 10; 773-776; 10.1016/j.scriptamat.2012.12.011
Kovalenko, O. and Greer, J. R., et el. (2013) Solid-state dewetting of thin iron films on sapphire substrates controlled by grain boundary diffusion ; Acta Materialia; Vol. 61; No. 9; 3148-3156; 10.1016/j.actamat.2013.01.062
Pathak, Siddhartha and Mohan, Nisha, et el. (2013) Compressive response of vertically aligned carbon nanotube films gleaned from in situ flat-punch indentations ; Journal of Materials Research; Vol. 28; No. 7; 984-997; 10.1557/jmr.2012.366
Lee, Seok-Woo and Jennings, Andrew T., et el. (2013) Emergence of enhanced strengths and Bauschinger effect in conformally passivated copper nanopillars as revealed by dislocation dynamics ; Acta Materialia; Vol. 61; No. 6; 1872-1885; 10.1016/j.actamat.2012.12.008
Wu, Z. X. and Zhang, Y. W., et el. (2013) Nanostructure and surface effects on yield in Cu nanowires ; Acta Materialia; Vol. 61; No. 6; 1831-1842; 10.1016/j.actamat.2012.11.053
Jennings, Andrew T. and Weinberger, Christopher R., et el. (2013) Modeling dislocation nucleation strengths in pristine metallic nanowires under experimental conditions ; Acta Materialia; Vol. 61; No. 6; 2244-2259; 10.1016/j.actamat.2012.12.044
Landau, Peri and Guo, Q., et el. (2013) The Effect of He Implantation on the Tensile Properties and Microstructure of Cu/Fe Nano-Bicrystals ; Advanced Functional Materials; Vol. 23; No. 10; 1281-1288; 10.1002/adfm.201201776
Guo, Qiang and Landau, Peri, et el. (2013) Helium Implantation Effects on the Compressive Response of Cu Nanopillars ; Small; Vol. 9; No. 5; 691-696; 10.1002/smll.201201614
Lian, Jie and Lee, Seok-Woo, et el. (2013) Emergence of film-thickness- and grain-size-dependent elastic
properties in nanocrystalline thin films ; Scripta Materialia; Vol. 68; No. 5; 261-264; 10.1016/j.scriptamat.2012.10.031
Tucker, Garritt J. and Aitken, Zachary H., et el. (2013) The mechanical behavior and deformation of bicrystalline nanowires ; Modelling and Simulation in Materials Science and Engineering; Vol. 21; No. 1; Art. No. 015004; 10.1088/0965-0393/21/1/015004
Greer, Julia R. (2013) Size-Dependent Strength in Single-Crystalline Metallic Nanostructures ; ISBN 9781118460399; Nano and Cell Mechanics: Fundamentals and Frontiers; 163-190; 10.1002/9781118482568.ch7
Gu, X. Wendy and Loynachan, Colleen N., et el. (2012) Size-Dependent Deformation of Nanocrystalline Pt Nanopillars ; Nano Letters; Vol. 12; No. 12; 6385-6392; 10.1021/nl3036993
Gan, B. and Murakami, H., et el. (2012) Nanoindentation and Nano-Compresion Testing of Ni_3Al Precipitates ; ISBN 9780470943205; Superalloys 2012; 83-91; 10.1002/9781118516430.ch9
Greer, Julia R. and Jang, Dongchan, et el. (2012) Exploring Deformation Mechanisms in Nanostructured Materials ; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 64; No. 10; 1241-1252; 10.1007/s11837-012-0438-6
Jang, Dongchan and Liao, Xiaoyan, et el. (2012) Deformation mechanisms in nanotwinned metal nanopillars ; Nature Nanotechnology; Vol. 7; No. 9; 594-601; 10.1038/NNANO.2012.116
Friedman, Nir and Jennings, Andrew T., et el. (2012) Statistics of Dislocation Slip Avalanches in Nanosized Single Crystals Show Tuned Critical Behavior Predicted by a Simple Mean Field Model ; Physical Review Letters; Vol. 109; No. 9; Art. No. 095507; 10.1103/PhysRevLett.109.095507
Needleman, A. and Hutchens, S. B., et el. (2012) Deformation of plastically compressible hardening-softening-hardening solids ; Acta Mechanica Sinica; Vol. 28; No. 4; 1115-1124; 10.1007/s10409-012-0117-4
Maaß, Robert and Meza, Lucas, et el. (2012) Ultrahigh Strength of Dislocation-Free Ni_3Al Nanocubes ; Small; Vol. 8; No. 12; 1869-1875; 10.1002/smll.201102603
Cho, Clara J. and O'Leary, Leslie, et el. (2012) In Situ Nanomechanical Measurements of Interfacial Strength in Membrane-Embedded Chemically Functionalized Si Microwires for Flexible Solar Cells ; Nano Letters; Vol. 12; No. 6; 3296-3301; 10.1021/nl3014007
Abadi, Parisa Pour Shahid Saeed and Hutchens, Shelby B., et el. (2012) Effects of morphology on the micro-compression response of carbon nanotube forests ; Nanoscale; Vol. 4; No. 11; 3373-3380; 10.1039/c2nr30474k
Kim, Ju-Young and Gu, Xun, et el. (2012) Suppression of Catastrophic Failure in Metallic Glass–Polyisoprene Nanolaminate Containing Nanopillars ; Advanced Functional Materials; Vol. 22; No. 9; 1972-1980; 10.1002/adfm.201103050
Jennings, A. T. and Gross, C., et el. (2012) Higher compressive strengths and the Bauschinger effect in conformally passivated copper nanopillars ; Acta Materialia; Vol. 60; No. 8; 3444-3455; 10.1016/j.actamat.2012.03.013
Hutchens, Shelby B. and Needleman, Alan, et el. (2012) A microstructurally motivated description of the deformation of vertically aligned carbon nanotube structures ; Applied Physics Letters; Vol. 100; No. 12; Art. No. 121910; 10.1063/1.3697686
Budiman, Arief Suriadi and Lee, Gyuhyon, et el. (2012) Plasticity of indium nanostructures as revealed by synchrotron X-ray microdiffraction ; Materials Science and Engineering A; Vol. 538; 89-97; 10.1016/j.msea.2012.01.017
Guo, Qiang and Greer, Julia R. (2012) Compressive properties of interface-containing Cu–Fe nano-pillars ; Scripta Materialia; Vol. 66; No. 5; 272-275; 10.1016/j.scriptamat.2011.11.008
Pathak, Siddhartha and Lim, Ee J., et el. (2012) Higher Recovery and Better Energy Dissipation at Faster Strain Rates in Carbon Nanotube Bundles: An in-Situ Study ; ACS Nano; Vol. 6; No. 3; 2189-2197; 10.1021/nn300376j
Hutchens, Shelby B. and Decolvenaere, Elizabeth, et el. (2012) Nanoshearing - Collective carbon nanotube micromechanics ; Materials Today; Vol. 15; No. 3; 127-127; 10.1016/S1369-7021(12)70048-2
Kim, Ju-Young and Jang, Dongchan, et el. (2012) Crystallographic orientation and size dependence of tension–compression asymmetry in molybdenum nano-pillars ; International Journal of Plasticity; Vol. 28; No. 1; 46-52; 10.1016/j.ijplas.2011.05.015
Jérusalem, Antoine and Fernández, Ana, et el. (2012) Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions ; Scripta Materialia; Vol. 66; No. 2; 93-96; 10.1016/j.scriptamat.2011.10.009
Weinberger, Christopher R. and Jennings, Andrew T., et el. (2012) Atomistic simulations and continuum modeling of dislocation
nucleation and strength in gold nanowires ; Journal of the Mechanics and Physics of Solids; Vol. 60; No. 1; 84-103; 10.1016/j.jmps.2011.09.010
Kim, Ju-Young and Jang, Dongchan, et el. (2011) Nanolaminates Utilizing Size-Dependent Homogeneous Plasticity of Metallic Glasses ; Advanced Functional Materials; Vol. 21; No. 23; 4550-4554; 10.1002/adfm.201101164
Jennings, Andrew T. and Greer, Julia R. (2011) Heterogeneous dislocation nucleation from surfaces and interfaces as governing plasticity mechanism in nanoscale metals ; Journal of Materials Research; Vol. 26; No. 22; 2803-2814; 10.1557/jmr.2011.338
Schaedler, T. A. and Jacobsen, A. J., et el. (2011) Ultralight Metallic Microlattices ; Science; Vol. 334; No. 6058; 962-965; 10.1126/science.1211649
Hutchens, Shelby B. and Needleman, Alan, et el. (2011) Analysis of uniaxial compression of vertically aligned
carbon nanotubes ; Journal of the Mechanics and Physics of Solids; Vol. 59; No. 10; 2227-2237; 10.1016/j.jmps.2011.05.002
Lian, Jie and Jang, Dongchan, et el. (2011) Catastrophic vs Gradual Collapse of Thin-Walled Nanocrystalline Ni Hollow Cylinders As Building Blocks of Microlattice Structures ; Nano Letters; Vol. 11; No. 10; 4118-4125; 10.1021/nl202475p
Sun, Qiaoyan and Guo, Qiang, et el. (2011) Size effects in strength and plasticity of single-crystalline titanium micropillars with prismatic slip orientation ; Scripta Materialia; Vol. 65; No. 6; 473-476; 10.1016/j.scriptamat.2011.05.033
Jennings, Andrew T. and Li, Ju, et el. (2011) Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation ; Acta Materialia; Vol. 59; No. 14; 5627-5637; 10.1016/j.actamat.2011.05.038
Greer, Julia R. and De Hosson, Jeff Th. M. (2011) Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect ; Progress in Materials Science; Vol. 56; No. 6; 654-724; 10.1016/j.pmatsci.2011.01.005
Lee, Gyuhyon and Kim, Ju-Young, et el. (2011) Plastic deformation of indium nanostructures ; Materials Science and Engineering A; Vol. 528; No. 19-20; 6112-6120; 10.1016/j.msea.2011.04.065
Jang, Dongchan and Gross, Cameron T., et el. (2011) Effects of size on the strength and deformation mechanism in Zr-based metallic glasses ; International Journal of Plasticity; Vol. 27; No. 6; 858-867; 10.1016/j.ijplas.2010.09.010
Kunz, Allison and Pathak, Siddhartha, et el. (2011) Size effects in Al nanopillars: Single crystalline vs. bicrystalline ; Acta Materialia; Vol. 59; No. 11; 4416-4424; 10.1016/j.actamat.2011.03.065
Valdevit, Lorenzo and Jacobsen, Alan J., et el. (2011) Protocols for the Optimal Design of Multi-Functional Cellular Structures: From Hypersonics to Micro-Architected Materials ; Journal of the American Ceramic Society; Vol. 94; No. S1; S15-S34; 10.1111/j.1551-2916.2011.04599.x
Huang, M. and Greer, J. R. (2011) Measuring Graphene Piezoreisistance via In-Situ Nanoindentation ; ECS Transactions; Vol. 35; No. 3; 211-216; 10.1149/1.3569914
Jang, Dongchan and Cai, Can, et el. (2011) Influence of Homogeneous Interfaces on the Strength of 500 nm
Diameter Cu Nanopillars ; Nano Letters; Vol. 11; No. 4; 1743-1746; 10.1021/nl2003076
Huang, Mingyuan and Pascal, Tod A., et el. (2011) Electronic-Mechanical Coupling in Graphene from in situ Nanoindentation Experiments and Multiscale Atomistic Simulations ; Nano Letters; Vol. 11; No. 3; 1241-1246; 10.1021/nl104227t
Jang, Dongchan and Greer, Julia R. (2011) Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars ; Scripta Materialia; Vol. 64; No. 1; 77-80; 10.1016/j.scriptamat.2010.09.010
Jennings, Andrew T. and Greer, Julia R. (2011) Tensile deformation of electroplated copper nanopillars ; Philosophical Magazine; Vol. 91; No. 7-9; 1108-1120; 10.1080/14786435.2010.505180
Kaul, Anupama B. and Megerian, Krikor G., et el. (2010) In situ characterization of vertically oriented carbon nanofibers for three-dimensional nano-electro-mechanical device applications ; Nanotechnology; Vol. 21; No. 31; Art. No. 315501; 10.1088/0957-4484/21/31/315501
Hutchens, Shelby B. and Hall, Lee J., et el. (2010) In situ Mechanical Testing Reveals Periodic Buckle Nucleation and Propagation in Carbon Nanotube Bundles ; Advanced Functional Materials; Vol. 20; No. 14; 2338-2346; 10.1002/adfm.201000305
Kaul, A. B. and Khan, A. R., et el. (2010) Nano-Electro-Mechanical Switches Derived from Carbon-Based Nanomaterials ; Nanoscience and Nanotechnology Letters; Vol. 2; No. 2; 163-169
Lopez, J. J. and Greer, F., et el. (2010) Enhanced resistance of single-layer graphene to ion bombardment ; Journal of Applied Physics; Vol. 107; No. 10; Art. No. 104326; 10.1063/1.3428466
Kaul, A. B. and Khan, A. R., et el. (2010) Carbon-based nano-electro-mechanical systems ; ISBN 978-0-8194-8143-6; Micro- and Nanotechnology Sensors, Systems, and Applications II; Art. No. 76790N; 10.1117/12.851293
Jennings, Andrew T. and Burek, Michael J., et el. (2010) Microstructure versus Size: Mechanical Properties of Electroplated Single Crystalline Cu Nanopillars ; Physical Review Letters; Vol. 104; No. 13; Art. No. 135503; 10.1103/PhysRevLett.104.135503
Kim, Ju-Young and Jang, Dongchan, et el. (2010) Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale ; Acta Materialia; Vol. 58; No. 7; 2355-2363; 10.1016/j.actamat.2009.12.022
Jang, Dongchan and Greer, Julia R. (2010) Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses ; Nature Materials; Vol. 9; No. 3; 215-219; 10.1038/nmat2622
Lee, Gyuhyon and Kim, Ju-Young, et el. (2010) Fabrication, structure and mechanical properties of indium nanopillars ; Acta Materialia; Vol. 58; No. 4; 1361-1368; 10.1016/j.actamat.2009.10.042
Burek, Michael J. and Greer, Julia R. (2010) Fabrication and Microstructure Control of Nanoscale Mechanical Testing Specimens via Electron Beam Lithography and Electroplating ; Nano Letters; Vol. 10; No. 1; 69-76; 10.1021/nl902872w
Greer, Julia R. and Kim, Ju-Young, et el. (2009) The in-situ mechanical testing of nanoscale single-crystalline nanopillars ; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 61; No. 12; 19-25; 10.1007/s11837-009-0174-8
Kim, Ju-Young and Greer, Julia R. (2009) Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale ; Acta Materialia; Vol. 57; No. 17; 5245-5253; 10.1016/j.actamat.2009.07.027
Greer, Julia R. and Jang, Dongchan, et el. (2009) Emergence of New Mechanical Functionality in Materials via Size Reduction ; Advanced Functional Materials; Vol. 19; No. 18; 2880-2886; 10.1002/adfm.200900854
Kim, Ju-Young and Jang, Dongchan, et el. (2009) Insight into the deformation behavior of niobium single crystals under uniaxial compression and tension at the nanoscale ; Scripta Materialia; Vol. 61; No. 3; 300-303; 10.1016/j.scriptamat.2009.04.012
Greer, Julia R. and Kim, Ju-Young, et el. (2009) In-Situ Investigation of Plasticity at Nano-Scale ; ISBN 978-0-7918-4835-7; Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; 519-520
Kaul, A. B. and Megerian, K. G., et el. (2009) High-throughput processes and structural characterization of single-nanotube based devices for 3D electronics ; ISBN 9780819475848; Micro- and Nanotechnology Sensors, Systems, and Applications; Art. No. 73180B; 10.1117/12.820723
Lian, Jie and Wang, Junian, et el. (2009) Sample boundary effect in nanoindentation of nano and microscale surface structures ; Journal of the Mechanics and Physics of Solids; Vol. 57; No. 5; 812-827; 10.1016/j.jmps.2009.01.008
Misra, Abha and Greer, Julia R., et el. (2009) Strain rate effects in the mechanical response of polymer-anchored carbon nanotube foams ; Advanced Materials; Vol. 21; No. 3; 334-338; 10.1002/adma.200801997
Brinckmann, S. and Kim, J. -Y., et el. (2009) Effects of sample geometry on the uniaxial tensile stress state at the nanoscale ; International Journal for Multiscale Computational Engineering; Vol. 7; No. 3; 187-194; 10.1615/IntJMultCompEng.v7.i3.20
Kim, Ju-Young and Greer, Julia R. (2008) Size-dependent mechanical properties of molybdenum nanopillars ; Applied Physics Letters; Vol. 93; No. 10; Art. No. 101916; 10.1063/1.2979684
Kim, Ju-Young and Kang, Seung-Kyun, et el. (2008) Evaluating plastic flow properties by characterizing indentation size effect using a sharp indenter ; Acta Materialia; Vol. 56; No. 14; 3338-3343; 10.1016/j.actamat.2008.02.049
Brinckmann, Stefan and Kim, Ju-Young, et el. (2008) Fundamental Differences in Mechanical Behavior between Two Types of Crystals at the Nanoscale ; Physical Review Letters; Vol. 100; No. 15; Art. No. 155502; 10.1103/PhysRevLett.100.155502
Greer, Julia R. and Espinosa, Horacio, et el. (2008) Comment on "Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal" Appl. Phys. Lett. 91, 111915 (2007) ; Applied Physics Letters; Vol. 92; No. 9; Art. No. 096101; 10.1063/1.2889997
Budiman, A. S. and Han, S. M., et el. (2008) A search for evidence of strain gradient hardening in Au submicron pillars under uniaxial compression using synchrotron X-ray microdiffraction ; Acta Metallurgica et Materialia; Vol. 56; No. 3; 602-608; 10.1016/j.actamat.2007.10.031
Greer, Julia R. and Weinberger, Christopher R., et el. (2007) Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: Compression experiments and dislocation dynamics simulations ; Materials Science and Engineering A; Vol. 493; No. 1-2; 21-25; 10.1016/j.msea.2007.08.093
Greer, Julia R. and Street, Robert A. (2007) Thermal cure effects on electrical performance of nanoparticle silver inks ; Acta Materialia; Vol. 55; No. 18; 6345-6349; 10.1016/j.actamat.2007.07.040
Greer, Julia R. and Street, Robert A. (2007) Mechanical characterization of solution-derived nanoparticle silver ink thin films ; Journal of Applied Physics; Vol. 101; No. 10; Art. No. 103529; 10.1063/1.2735404
Nix, William D. and Greer, Julia R., et el. (2007) Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvation ; Thin Solid Films; Vol. 515; No. 6; 3152-3157; 10.1016/j.tsf.2006.01.030
Greer, Julia R. (2006) Bridging the gap between computational and experimental length scales: A review on nanoscale plasticity ; Reviews on Advanced Materials Science; Vol. 13; No. 1; 59-70
Wang, Junlan and Lian, Jie, et el. (2006) Size effect in contact compression of nano- and microscale pyramid structures ; Acta Materialia; Vol. 54; No. 15; 3973-3982; 10.1016/j.actamat.2006.04.030
Greer, Julia R. and Nix, William D. (2006) Nanoscale gold pillars strengthened through dislocation starvation ; Physical Review B; Vol. 73; No. 24; Art. No. 245410; 10.1103/PhysRevB.73.245410
Greer, Julia R. (2006) Effective Use of Focused Ion Beam (FIB) in Investigating Fundamental Mechanical Properties of Metals at the Sub-Micron Scale ; Materials Research Society symposia proceedings; Vol. 983; No. 1; 69-71; 10.1557/PROC-983-0983-LL08-03
Greer, J. R. and Nix, W. D. (2005) Size dependence of mechanical properties of gold at the sub-micron scale ; Applied Physics A: Materials Science and Processing; Vol. 80; No. 8; 1625-1629; 10.1007/s00339-005-3204-6
Greer, Julia R. and Oliver, Warren C., et el. (2005) Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients ; Acta Materialia; Vol. 53; No. 6; 1821-1830; 10.1016/j.actamat.2004.12.031